Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-1900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-egprs)

Failing for the past 221 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=5058): Process ended prematurely: osmo-stp_10.42.42.5(pid=5058) [trial-2359↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5058)]

Standard Output

----------------------------------------------
trial-2359 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py
----------------------------------------------
12:23:02.216152 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:02.232800 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
12:23:02.417041 tst                        iperf3.py: using LAC 21435
12:23:02.577209 tst                        iperf3.py: using RAC 15
12:23:02.727948 tst                        iperf3.py: using CellId 21435
12:23:02.864674 tst                        iperf3.py: using BVCI 21436
12:23:02.889390 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:02.900891 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:02.919219 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:02.935195 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:02.948942 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:02.960571 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:02.975397 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:02.988878 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:03.005059 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
12:23:03.319944 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
12:23:03.479518 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:23:03.885653 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4929): Launched
12:23:04.239074 run iperf3-srv_10.42.42.10(pid=4970): Launched
12:23:04.486400 tst                      iperf3.py:8: start network...
12:23:04.639114 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:23:05.243817 run          create_hlr_db(pid=5050): Launched
12:23:05.428369 bus                          /gobi_6: Setting Powered False
12:23:06.451154 run          create_hlr_db(pid=5050): Terminated: ok {rc=0}
12:23:06.893531 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5054): Launched
12:23:07.328785 run    osmo-hlr_10.42.42.2(pid=5055): Launched
12:23:07.578978 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:23:08.178782 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5057): Launched
12:23:08.609782 run    osmo-stp_10.42.42.5(pid=5058): Launched
12:23:08.832886 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:23:09.434996 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5060): Launched
12:23:09.556936 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:23:09.866904 run               patchelf(pid=5061): Launched
12:23:10.066173 run    osmo-stp_10.42.42.5(pid=5058): ERR: Terminated: ERROR {rc=1}  [trial-2359↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5058)]
12:23:10.212113 run    osmo-stp_10.42.42.5(pid=5058): stdout: 
| (launched: 2022-12-09_12:23:08.350129)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:23:10.359405 run    osmo-stp_10.42.42.5(pid=5058): stderr: 
| �[0;m�[38;5;43m20221209122308643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209122308643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209122308643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209122308644 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209122308644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209122308644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209122308644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:23:10.501213 run    osmo-stp_10.42.42.5(pid=5058): stdout: 
| (launched: 2022-12-09_12:23:08.350129)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:23:10.641782 run    osmo-stp_10.42.42.5(pid=5058): stderr: 
| �[0;m�[38;5;43m20221209122308643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209122308643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209122308643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209122308644 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209122308644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209122308644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209122308644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:23:10.807556 run               patchelf(pid=5061): Terminating (SIGINT)
12:23:11.003034 run               patchelf(pid=5061): Terminated: ok {rc=0}
12:23:11.039157 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=5058): Process ended prematurely: osmo-stp_10.42.42.5(pid=5058) [trial-2359↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5058)]  [trial-2359↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8]
12:23:11.050452 tst                      iperf3.py:8: Test FAILED (8.9 sec)
12:23:11.119957 run    osmo-hlr_10.42.42.2(pid=5055): ERR: Terminated: ERROR {rc=237}  [trial-2359↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5055)]
12:23:11.174771 run    osmo-hlr_10.42.42.2(pid=5055): stdout: 
| (launched: 2022-12-09_12:23:07.065166) 
12:23:11.231084 run    osmo-hlr_10.42.42.2(pid=5055): stderr: 
| �[0;m�[1;31m20221209122307371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209122307371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209122307371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209122307371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209122307371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209122307371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209122307391 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209122307400 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209122307400 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209122307400 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:23:11.277405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4929): Terminating (SIGTERM)
12:23:11.325671 run iperf3-srv_10.42.42.10(pid=4970): Terminating (SIGTERM)
12:23:11.372891 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5054): Terminating (SIGTERM)
12:23:11.420022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5057): Terminating (SIGTERM)
12:23:11.465934 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5060): Terminating (SIGTERM)
12:23:11.478285 ---      ParallelTerminationStrategy: PID 4929 died...
12:23:11.540145 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4929): Terminated: ok {rc=0}
12:23:11.551437 ---      ParallelTerminationStrategy: PID 4970 died...
12:23:11.612006 run iperf3-srv_10.42.42.10(pid=4970): Terminated {rc=256}
12:23:11.623245 ---      ParallelTerminationStrategy: PID 5054 died...
12:23:11.683530 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5054): Terminated: ok {rc=0}
12:23:11.695822 ---      ParallelTerminationStrategy: PID 5057 died...
12:23:11.756109 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5057): Terminated: ok {rc=0}
12:23:11.768200 ---      ParallelTerminationStrategy: PID 5060 died...
12:23:11.828443 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5060): Terminated: ok {rc=0}
12:23:11.921306 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5058): Process ended prematurely: osmo-stp_10.42.42.5(pid=5058) [trial-2359↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5058)]