Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1947): Process ended prematurely: osmo-stp_10.42.42.5(pid=1947) [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1947)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-sysmocell5000+mod-bts0-egprs iperf3.py ---------------------------------------------- 11:50:34.798838 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:34.810751 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:50:34.956498 tst iperf3.py: using LAC 21264 11:50:35.080230 tst iperf3.py: using RAC 99 11:50:35.204895 tst iperf3.py: using CellId 21264 11:50:35.327840 tst iperf3.py: using BVCI 21265 11:50:35.352162 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:35.363399 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:35.374352 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:35.385342 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:35.396187 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:35.407143 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:35.418336 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:35.429223 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:35.440606 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:50:35.743392 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 11:50:35.882553 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:50:36.228155 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1939): Launched 11:50:36.516764 run iperf3-srv_10.42.42.10(pid=1940): Launched 11:50:36.721070 tst iperf3.py:8: start network... 11:50:36.860238 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:50:37.386920 run create_hlr_db(pid=1941): Launched 11:50:37.579599 bus /gobi_6: Setting Powered False 11:50:38.589893 run create_hlr_db(pid=1941): Terminated: ok {rc=0} 11:50:39.042692 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1943): Launched 11:50:39.379808 run osmo-hlr_10.42.42.2(pid=1944): Launched 11:50:39.503282 run osmo-stp_10.42.42.5: Starting osmo-stp 11:50:40.090145 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1946): Launched 11:50:40.425946 run osmo-stp_10.42.42.5(pid=1947): Launched 11:50:40.548029 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:50:41.135197 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1949): Launched 11:50:41.254116 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:50:41.546544 run patchelf(pid=1950): Launched 11:50:41.741946 run osmo-stp_10.42.42.5(pid=1947): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1947)] 11:50:41.883833 run osmo-stp_10.42.42.5(pid=1947): stdout: | (launched: 2022-12-09_11:50:40.259689) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:50:42.026212 run osmo-stp_10.42.42.5(pid=1947): stderr: | �[0;m�[38;5;43m20221209115040453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115040453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115040454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115040454 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115040454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115040454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115040454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:50:42.163654 run osmo-stp_10.42.42.5(pid=1947): stdout: | (launched: 2022-12-09_11:50:40.259689) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:50:42.300269 run osmo-stp_10.42.42.5(pid=1947): stderr: | �[0;m�[38;5;43m20221209115040453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115040453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115040454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115040454 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115040454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115040454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115040454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:50:42.460336 run patchelf(pid=1950): Terminating (SIGINT) 11:50:42.648616 run patchelf(pid=1950): Terminated: ok {rc=0} 11:50:42.683159 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1947): Process ended prematurely: osmo-stp_10.42.42.5(pid=1947) [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1947)] [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8] 11:50:42.693261 tst iperf3.py:8: Test FAILED (7.9 sec) 11:50:42.758087 run osmo-hlr_10.42.42.2(pid=1944): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1944)] 11:50:42.810702 run osmo-hlr_10.42.42.2(pid=1944): stdout: | (launched: 2022-12-09_11:50:39.212484) 11:50:42.864170 run osmo-hlr_10.42.42.2(pid=1944): stderr: | �[0;m�[1;31m20221209115039413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209115039413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209115039413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209115039413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209115039413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209115039413 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209115039429 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-sysmocell5000+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209115039439 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209115039439 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209115039439 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:50:42.909695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1939): Terminating (SIGTERM) 11:50:42.952669 run iperf3-srv_10.42.42.10(pid=1940): Terminating (SIGTERM) 11:50:42.995125 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1943): Terminating (SIGTERM) 11:50:43.038325 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1946): Terminating (SIGTERM) 11:50:43.081080 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1949): Terminating (SIGTERM) 11:50:43.091201 --- ParallelTerminationStrategy: PID 1939 died... 11:50:43.148584 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1939): Terminated: ok {rc=0} 11:50:43.158903 --- ParallelTerminationStrategy: PID 1940 died... 11:50:43.216291 run iperf3-srv_10.42.42.10(pid=1940): Terminated {rc=256} 11:50:43.226479 --- ParallelTerminationStrategy: PID 1943 died... 11:50:43.284156 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1943): Terminated: ok {rc=0} 11:50:43.294400 --- ParallelTerminationStrategy: PID 1946 died... 11:50:43.351979 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1946): Terminated: ok {rc=0} 11:50:43.362220 --- ParallelTerminationStrategy: PID 1949 died... 11:50:43.420072 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1949): Terminated: ok {rc=0} 11:50:43.510546 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1947): Process ended prematurely: osmo-stp_10.42.42.5(pid=1947) [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1947)]