Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=2850): Process ended prematurely: osmo-stp_10.42.42.5(pid=2850) [trial-2359↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2850)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:59:44.413713 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:59:44.426505 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:59:44.592005 tst cs_paging_gprs_active.py: using LAC 21312 11:59:44.723487 tst cs_paging_gprs_active.py: using RAC 147 11:59:44.855149 tst cs_paging_gprs_active.py: using CellId 21312 11:59:44.985813 tst cs_paging_gprs_active.py: using BVCI 21313 11:59:45.011435 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:59:45.022957 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:59:45.034159 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:59:45.046047 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:59:45.057427 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:59:45.069104 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:59:45.081001 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:59:45.092478 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:59:45.104317 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:59:45.224777 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:59:45.510575 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:59:45.638667 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:59:45.994869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2840): Launched 11:59:46.316690 run iperf3-srv_10.42.42.10(pid=2841): Launched 11:59:46.509985 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:59:46.640437 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:59:46.978427 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2842): Launched 11:59:47.267027 run iperf3-srv_10.42.42.10(pid=2843): Launched 11:59:47.454717 tst cs_paging_gprs_active.py:38: start network... 11:59:47.582831 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:59:48.079137 run create_hlr_db(pid=2844): Launched 11:59:48.256233 bus /gobi_6: Setting Powered False 11:59:49.278514 run create_hlr_db(pid=2844): Terminated: ok {rc=0} 11:59:49.691720 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2846): Launched 11:59:50.003956 run osmo-hlr_10.42.42.2(pid=2847): Launched 11:59:50.115876 run osmo-stp_10.42.42.5: Starting osmo-stp 11:59:50.650517 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2849): Launched 11:59:50.959750 run osmo-stp_10.42.42.5(pid=2850): Launched 11:59:51.071365 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:59:51.611857 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2852): Launched 11:59:51.721812 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:59:52.000751 run patchelf(pid=2853): Launched 11:59:52.181867 run osmo-stp_10.42.42.5(pid=2850): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2850)] 11:59:52.313475 run osmo-stp_10.42.42.5(pid=2850): stdout: | (launched: 2022-12-09_11:59:50.807019) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:59:52.445560 run osmo-stp_10.42.42.5(pid=2850): stderr: | �[0;m�[38;5;43m20221209115950978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115950979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115950979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115950979 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115950980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115950980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115950980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:59:52.573549 run osmo-stp_10.42.42.5(pid=2850): stdout: | (launched: 2022-12-09_11:59:50.807019) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:59:52.700902 run osmo-stp_10.42.42.5(pid=2850): stderr: | �[0;m�[38;5;43m20221209115950978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115950979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115950979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115950979 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115950980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115950980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115950980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:59:52.849800 run patchelf(pid=2853): Terminating (SIGINT) 11:59:53.024712 run patchelf(pid=2853): Terminated: ok {rc=0} 11:59:53.056807 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2850): Process ended prematurely: osmo-stp_10.42.42.5(pid=2850) [trial-2359↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2850)] [trial-2359↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:59:53.066141 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 11:59:53.126489 run osmo-hlr_10.42.42.2(pid=2847): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2847)] 11:59:53.175445 run osmo-hlr_10.42.42.2(pid=2847): stdout: | (launched: 2022-12-09_11:59:49.849909) 11:59:53.225126 run osmo-hlr_10.42.42.2(pid=2847): stderr: | �[0;m�[1;31m20221209115950028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209115950028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209115950028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209115950028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209115950028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209115950028 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209115950042 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209115950051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209115950051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209115950051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:59:53.267023 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2840): Terminating (SIGTERM) 11:59:53.306364 run iperf3-srv_10.42.42.10(pid=2841): Terminating (SIGTERM) 11:59:53.345785 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2842): Terminating (SIGTERM) 11:59:53.385057 run iperf3-srv_10.42.42.10(pid=2843): Terminating (SIGTERM) 11:59:53.431515 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2846): Terminating (SIGTERM) 11:59:53.473709 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2849): Terminating (SIGTERM) 11:59:53.517340 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2852): Terminating (SIGTERM) 11:59:53.527615 --- ParallelTerminationStrategy: PID 2840 died... 11:59:53.584727 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2840): Terminated: ok {rc=0} 11:59:53.595979 --- ParallelTerminationStrategy: PID 2841 died... 11:59:53.653272 run iperf3-srv_10.42.42.10(pid=2841): Terminated {rc=256} 11:59:53.664292 --- ParallelTerminationStrategy: PID 2842 died... 11:59:53.721996 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2842): Terminated: ok {rc=0} 11:59:53.732292 --- ParallelTerminationStrategy: PID 2843 died... 11:59:53.788807 run iperf3-srv_10.42.42.10(pid=2843): Terminated {rc=256} 11:59:53.799974 --- ParallelTerminationStrategy: PID 2846 died... 11:59:53.858162 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2846): Terminated: ok {rc=0} 11:59:53.868510 --- ParallelTerminationStrategy: PID 2849 died... 11:59:53.925358 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2849): Terminated: ok {rc=0} 11:59:53.936439 --- ParallelTerminationStrategy: PID 2852 died... 11:59:53.993931 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2852): Terminated: ok {rc=0} 11:59:54.082656 bus /gobi_0: Setting Powered False 11:59:55.188686 bus /gobi_0: Setting Powered False 11:59:56.295598 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2850): Process ended prematurely: osmo-stp_10.42.42.5(pid=2850) [trial-2359↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2850)]