Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.ping.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=13624): Process ended prematurely: osmo-stp_10.42.42.5(pid=13624) [trial-2360↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13624)]
Standard Output
---------------------------------------------- trial-2360 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 13:58:24.244527 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:58:24.256590 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:58:24.418516 tst ping.py: using LAC 21936 13:58:24.540412 tst ping.py: using RAC 6 13:58:24.658393 tst ping.py: using CellId 21936 13:58:24.774942 tst ping.py: using BVCI 21937 13:58:24.797908 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:58:24.809065 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:58:24.820004 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:58:24.831291 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:58:24.842461 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:58:24.853685 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:58:24.864649 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:58:24.875547 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:58:25.163928 tst ping.py:19: start network... 13:58:25.296822 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:58:25.795984 run create_hlr_db(pid=13618): Launched 13:58:25.980593 bus /gobi_6: Setting Powered False 13:58:27.001717 run create_hlr_db(pid=13618): Terminated: ok {rc=0} 13:58:27.425666 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13620): Launched 13:58:27.743522 run osmo-hlr_10.42.42.2(pid=13621): Launched 13:58:27.863249 run osmo-stp_10.42.42.5: Starting osmo-stp 13:58:28.418058 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13623): Launched 13:58:28.735538 run osmo-stp_10.42.42.5(pid=13624): Launched 13:58:28.851238 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:58:29.407118 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13626): Launched 13:58:29.520359 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:58:29.796359 run patchelf(pid=13627): Launched 13:58:29.982327 run osmo-stp_10.42.42.5(pid=13624): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13624)] 13:58:30.118404 run osmo-stp_10.42.42.5(pid=13624): stdout: | (launched: 2022-12-09_13:58:28.579616) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:58:30.255074 run osmo-stp_10.42.42.5(pid=13624): stderr: | �[0;m�[38;5;43m20221209135828770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209135828770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209135828770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209135828771 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209135828771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209135828771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209135828771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:58:30.387008 run osmo-stp_10.42.42.5(pid=13624): stdout: | (launched: 2022-12-09_13:58:28.579616) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:58:30.517436 run osmo-stp_10.42.42.5(pid=13624): stderr: | �[0;m�[38;5;43m20221209135828770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209135828770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209135828770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209135828771 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209135828771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209135828771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209135828771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:58:30.668727 run patchelf(pid=13627): Terminating (SIGINT) 13:58:30.852449 run patchelf(pid=13627): Terminated: ok {rc=0} 13:58:30.885230 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=13624): Process ended prematurely: osmo-stp_10.42.42.5(pid=13624) [trial-2360↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13624)] [trial-2360↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22] 13:58:30.895981 tst ping.py:22: Test FAILED (6.6 sec) 13:58:30.967102 run osmo-hlr_10.42.42.2(pid=13621): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13621)] 13:58:31.020816 run osmo-hlr_10.42.42.2(pid=13621): stdout: | (launched: 2022-12-09_13:58:27.587175) 13:58:31.074512 run osmo-hlr_10.42.42.2(pid=13621): stderr: | �[0;m�[1;31m20221209135827781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209135827781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209135827781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209135827781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209135827781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209135827781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209135827794 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209135827804 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209135827804 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209135827804 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:58:31.120468 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13620): Terminating (SIGTERM) 13:58:31.164318 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13623): Terminating (SIGTERM) 13:58:31.208263 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13626): Terminating (SIGTERM) 13:58:31.218565 --- ParallelTerminationStrategy: PID 13620 died... 13:58:31.277230 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13620): Terminated: ok {rc=0} 13:58:31.288297 --- ParallelTerminationStrategy: PID 13623 died... 13:58:31.346714 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13623): Terminated: ok {rc=0} 13:58:31.357787 --- ParallelTerminationStrategy: PID 13626 died... 13:58:31.416083 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13626): Terminated: ok {rc=0} 13:58:31.505868 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13624): Process ended prematurely: osmo-stp_10.42.42.5(pid=13624) [trial-2360↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13624)]