Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 222 builds (Since #2139 )

Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=9059): Process ended prematurely: osmo-stp_10.42.42.5(pid=9059) [trial-2360↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9059)]

Standard Output

----------------------------------------------
trial-2360 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
13:12:43.318551 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:12:43.330595 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
13:12:43.475124 tst                        iperf3.py: using LAC 21693
13:12:43.598097 tst                        iperf3.py: using RAC 18
13:12:43.720813 tst                        iperf3.py: using CellId 21693
13:12:43.843479 tst                        iperf3.py: using BVCI 21694
13:12:43.867211 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:12:43.878612 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:12:43.889650 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:12:43.900666 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:12:43.911676 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:12:43.922778 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:12:43.933912 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:12:43.944773 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:12:43.955909 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
13:12:44.235898 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
13:12:44.364590 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
13:12:44.684828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9051): Launched
13:12:44.950320 run iperf3-srv_10.42.42.10(pid=9052): Launched
13:12:45.138135 tst                      iperf3.py:8: start network...
13:12:45.266187 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:12:45.760591 run          create_hlr_db(pid=9053): Launched
13:12:45.966261 bus                          /gobi_6: Setting Powered False
13:12:46.960333 run          create_hlr_db(pid=9053): Terminated: ok {rc=0}
13:12:47.401336 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9055): Launched
13:12:47.709936 run    osmo-hlr_10.42.42.2(pid=9056): Launched
13:12:47.823217 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:12:48.356579 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9058): Launched
13:12:48.665107 run    osmo-stp_10.42.42.5(pid=9059): Launched
13:12:48.776112 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:12:49.313180 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9061): Launched
13:12:49.422720 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:12:49.690661 run               patchelf(pid=9062): Launched
13:12:49.870270 run    osmo-stp_10.42.42.5(pid=9059): ERR: Terminated: ERROR {rc=1}  [trial-2360↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9059)]
13:12:50.001567 run    osmo-stp_10.42.42.5(pid=9059): stdout: 
| (launched: 2022-12-09_13:12:48.512516)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:12:50.132700 run    osmo-stp_10.42.42.5(pid=9059): stderr: 
| �[0;m�[38;5;43m20221209131248683 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209131248683 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209131248684 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209131248684 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209131248685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209131248685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209131248685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:12:50.259850 run    osmo-stp_10.42.42.5(pid=9059): stdout: 
| (launched: 2022-12-09_13:12:48.512516)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:12:50.386192 run    osmo-stp_10.42.42.5(pid=9059): stderr: 
| �[0;m�[38;5;43m20221209131248683 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209131248683 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209131248684 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209131248684 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209131248685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209131248685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209131248685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:12:50.533056 run               patchelf(pid=9062): Terminating (SIGINT)
13:12:50.705371 run               patchelf(pid=9062): Terminated: ok {rc=0}
13:12:50.736755 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9059): Process ended prematurely: osmo-stp_10.42.42.5(pid=9059) [trial-2360↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9059)]  [trial-2360↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
13:12:50.745972 tst                      iperf3.py:8: Test FAILED (7.5 sec)
13:12:50.805615 run    osmo-hlr_10.42.42.2(pid=9056): ERR: Terminated: ERROR {rc=237}  [trial-2360↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9056)]
13:12:50.853970 run    osmo-hlr_10.42.42.2(pid=9056): stdout: 
| (launched: 2022-12-09_13:12:47.557508) 
13:12:50.902958 run    osmo-hlr_10.42.42.2(pid=9056): stderr: 
| �[0;m�[1;31m20221209131247736 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209131247736 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209131247737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209131247737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209131247737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209131247737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209131247749 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209131247758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209131247758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209131247758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:12:50.944725 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9051): Terminating (SIGTERM)
13:12:50.983803 run iperf3-srv_10.42.42.10(pid=9052): Terminating (SIGTERM)
13:12:51.023067 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9055): Terminating (SIGTERM)
13:12:51.062339 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9058): Terminating (SIGTERM)
13:12:51.101666 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9061): Terminating (SIGTERM)
13:12:51.110809 ---      ParallelTerminationStrategy: PID 9051 died...
13:12:51.163547 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9051): Terminated: ok {rc=0}
13:12:51.172938 ---      ParallelTerminationStrategy: PID 9052 died...
13:12:51.224902 run iperf3-srv_10.42.42.10(pid=9052): Terminated {rc=256}
13:12:51.234273 ---      ParallelTerminationStrategy: PID 9055 died...
13:12:51.286460 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9055): Terminated: ok {rc=0}
13:12:51.295827 ---      ParallelTerminationStrategy: PID 9058 died...
13:12:51.347887 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9058): Terminated: ok {rc=0}
13:12:51.357341 ---      ParallelTerminationStrategy: PID 9061 died...
13:12:51.409570 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9061): Terminated: ok {rc=0}
13:12:51.497073 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9059): Process ended prematurely: osmo-stp_10.42.42.5(pid=9059) [trial-2360↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9059)]