Failed
gprs:trx-lms+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11419): Process ended prematurely: osmo-stp_10.42.42.5(pid=11419) [trial-2360↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11419)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-lms+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 13:38:22.780565 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:38:22.793622 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:38:22.966422 tst ping_idle_ping.py: using LAC 21829 13:38:23.094201 tst ping_idle_ping.py: using RAC 154 13:38:23.226300 tst ping_idle_ping.py: using CellId 21829 13:38:23.355102 tst ping_idle_ping.py: using BVCI 21830 13:38:23.381071 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:38:23.393469 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:38:23.407167 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:38:23.420891 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:38:23.433379 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:38:23.446744 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:38:23.461607 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:38:23.475403 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:38:23.777433 tst ping_idle_ping.py:24: start network... 13:38:23.914381 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:38:24.473747 run create_hlr_db(pid=11413): Launched 13:38:24.669267 bus /gobi_6: Setting Powered False 13:38:25.682010 run create_hlr_db(pid=11413): Terminated: ok {rc=0} 13:38:26.109160 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11415): Launched 13:38:26.427725 run osmo-hlr_10.42.42.2(pid=11416): Launched 13:38:26.547596 run osmo-stp_10.42.42.5: Starting osmo-stp 13:38:27.098074 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11418): Launched 13:38:27.415862 run osmo-stp_10.42.42.5(pid=11419): Launched 13:38:27.531980 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:38:28.086149 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11421): Launched 13:38:28.199319 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:38:28.476500 run patchelf(pid=11422): Launched 13:38:28.663185 run osmo-stp_10.42.42.5(pid=11419): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11419)] 13:38:28.799372 run osmo-stp_10.42.42.5(pid=11419): stdout: | (launched: 2022-12-09_13:38:27.258533) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:38:28.935826 run osmo-stp_10.42.42.5(pid=11419): stderr: | �[0;m�[38;5;43m20221209133827450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209133827450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209133827450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209133827451 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209133827451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209133827451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209133827451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:38:29.067149 run osmo-stp_10.42.42.5(pid=11419): stdout: | (launched: 2022-12-09_13:38:27.258533) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:38:29.196848 run osmo-stp_10.42.42.5(pid=11419): stderr: | �[0;m�[38;5;43m20221209133827450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209133827450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209133827450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209133827451 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209133827451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209133827451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209133827451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:38:29.347853 run patchelf(pid=11422): Terminating (SIGINT) 13:38:29.525164 run patchelf(pid=11422): Terminated: ok {rc=0} 13:38:29.558208 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=11419): Process ended prematurely: osmo-stp_10.42.42.5(pid=11419) [trial-2360↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11419)] [trial-2360↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 13:38:29.567403 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 13:38:29.632042 run osmo-hlr_10.42.42.2(pid=11416): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11416)] 13:38:29.684358 run osmo-hlr_10.42.42.2(pid=11416): stdout: | (launched: 2022-12-09_13:38:26.270502) 13:38:29.737458 run osmo-hlr_10.42.42.2(pid=11416): stderr: | �[0;m�[1;31m20221209133826469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209133826469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209133826469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209133826469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209133826469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209133826469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209133826485 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-lms+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209133826495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209133826495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209133826495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:38:29.782739 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11415): Terminating (SIGTERM) 13:38:29.825138 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11418): Terminating (SIGTERM) 13:38:29.867479 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11421): Terminating (SIGTERM) 13:38:29.877716 --- ParallelTerminationStrategy: PID 11415 died... 13:38:29.934754 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11415): Terminated: ok {rc=0} 13:38:29.945103 --- ParallelTerminationStrategy: PID 11418 died... 13:38:30.001310 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11418): Terminated: ok {rc=0} 13:38:30.011842 --- ParallelTerminationStrategy: PID 11421 died... 13:38:30.068693 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11421): Terminated: ok {rc=0} 13:38:30.155690 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11419): Process ended prematurely: osmo-stp_10.42.42.5(pid=11419) [trial-2360↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11419)]