Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)

Failing for the past 222 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=9536): Process ended prematurely: osmo-stp_10.42.42.5(pid=9536) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9536)]

Standard Output

----------------------------------------------
trial-2360 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
13:19:36.540517 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:19:36.552276 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
13:19:36.712893 tst                        iperf3.py: using LAC 21730
13:19:36.835342 tst                        iperf3.py: using RAC 55
13:19:36.957913 tst                        iperf3.py: using CellId 21730
13:19:37.086213 tst                        iperf3.py: using BVCI 21731
13:19:37.111393 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:19:37.123009 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:19:37.134607 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:19:37.146360 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:19:37.158276 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:19:37.169750 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:19:37.181517 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:19:37.193015 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:19:37.204686 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
13:19:37.500832 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
13:19:37.638163 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
13:19:37.976732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9528): Launched
13:19:38.259697 run iperf3-srv_10.42.42.10(pid=9529): Launched
13:19:38.459803 tst                      iperf3.py:8: start network...
13:19:38.596650 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:19:39.112013 run          create_hlr_db(pid=9530): Launched
13:19:39.302434 bus                          /gobi_6: Setting Powered False
13:19:40.322652 run          create_hlr_db(pid=9530): Terminated: ok {rc=0}
13:19:40.733230 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9532): Launched
13:19:41.042288 run    osmo-hlr_10.42.42.2(pid=9533): Launched
13:19:41.155868 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:19:41.688350 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9535): Launched
13:19:41.996358 run    osmo-stp_10.42.42.5(pid=9536): Launched
13:19:42.107909 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:19:42.643182 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9538): Launched
13:19:42.752386 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:19:43.020248 run               patchelf(pid=9539): Launched
13:19:43.200576 run    osmo-stp_10.42.42.5(pid=9536): ERR: Terminated: ERROR {rc=1}  [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9536)]
13:19:43.332168 run    osmo-stp_10.42.42.5(pid=9536): stdout: 
| (launched: 2022-12-09_13:19:41.844386)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:19:43.463791 run    osmo-stp_10.42.42.5(pid=9536): stderr: 
| �[0;m�[38;5;43m20221209131942015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209131942015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209131942015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209131942016 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209131942016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209131942016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209131942016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:19:43.591528 run    osmo-stp_10.42.42.5(pid=9536): stdout: 
| (launched: 2022-12-09_13:19:41.844386)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:19:43.717457 run    osmo-stp_10.42.42.5(pid=9536): stderr: 
| �[0;m�[38;5;43m20221209131942015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209131942015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209131942015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209131942016 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209131942016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209131942016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209131942016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:19:43.864102 run               patchelf(pid=9539): Terminating (SIGINT)
13:19:44.036446 run               patchelf(pid=9539): Terminated: ok {rc=0}
13:19:44.068419 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9536): Process ended prematurely: osmo-stp_10.42.42.5(pid=9536) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9536)]  [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8]
13:19:44.077713 tst                      iperf3.py:8: Test FAILED (7.6 sec)
13:19:44.137783 run    osmo-hlr_10.42.42.2(pid=9533): ERR: Terminated: ERROR {rc=237}  [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9533)]
13:19:44.186653 run    osmo-hlr_10.42.42.2(pid=9533): stdout: 
| (launched: 2022-12-09_13:19:40.890250) 
13:19:44.236126 run    osmo-hlr_10.42.42.2(pid=9533): stderr: 
| �[0;m�[1;31m20221209131941068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209131941068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209131941068 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209131941069 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209131941069 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209131941069 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209131941081 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209131941090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209131941090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209131941090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:19:44.278316 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9528): Terminating (SIGTERM)
13:19:44.317978 run iperf3-srv_10.42.42.10(pid=9529): Terminating (SIGTERM)
13:19:44.357570 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9532): Terminating (SIGTERM)
13:19:44.397124 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9535): Terminating (SIGTERM)
13:19:44.436706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9538): Terminating (SIGTERM)
13:19:44.445923 ---      ParallelTerminationStrategy: PID 9528 died...
13:19:44.498999 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9528): Terminated: ok {rc=0}
13:19:44.508410 ---      ParallelTerminationStrategy: PID 9529 died...
13:19:44.560981 run iperf3-srv_10.42.42.10(pid=9529): Terminated {rc=256}
13:19:44.570441 ---      ParallelTerminationStrategy: PID 9532 died...
13:19:44.623527 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9532): Terminated: ok {rc=0}
13:19:44.633015 ---      ParallelTerminationStrategy: PID 9535 died...
13:19:44.685779 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9535): Terminated: ok {rc=0}
13:19:44.695216 ---      ParallelTerminationStrategy: PID 9538 died...
13:19:44.748267 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9538): Terminated: ok {rc=0}
13:19:44.831585 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9536): Process ended prematurely: osmo-stp_10.42.42.5(pid=9536) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9536)]