Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=9469): Process ended prematurely: osmo-stp_10.42.42.5(pid=9469) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9469)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-sysmocell5000+mod-bts0-egprs iperf3.py ---------------------------------------------- 13:18:36.929315 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:18:36.940865 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:18:37.084676 tst iperf3.py: using LAC 21725 13:18:37.214726 tst iperf3.py: using RAC 50 13:18:37.343013 tst iperf3.py: using CellId 21725 13:18:37.466550 tst iperf3.py: using BVCI 21726 13:18:37.491104 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:18:37.502268 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:18:37.513082 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:18:37.523788 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:18:37.534505 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:18:37.545423 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:18:37.556292 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:18:37.567042 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:18:37.577996 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:18:37.859274 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 13:18:37.986810 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:18:38.303578 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9461): Launched 13:18:38.568909 run iperf3-srv_10.42.42.10(pid=9462): Launched 13:18:38.755303 tst iperf3.py:8: start network... 13:18:38.882895 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:18:39.374558 run create_hlr_db(pid=9463): Launched 13:18:39.551092 bus /gobi_6: Setting Powered False 13:18:40.571329 run create_hlr_db(pid=9463): Terminated: ok {rc=0} 13:18:40.981110 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9465): Launched 13:18:41.288299 run osmo-hlr_10.42.42.2(pid=9466): Launched 13:18:41.401535 run osmo-stp_10.42.42.5: Starting osmo-stp 13:18:41.934863 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9468): Launched 13:18:42.242830 run osmo-stp_10.42.42.5(pid=9469): Launched 13:18:42.354464 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:18:42.888610 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9471): Launched 13:18:42.997895 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:18:43.266297 run patchelf(pid=9472): Launched 13:18:43.445756 run osmo-stp_10.42.42.5(pid=9469): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9469)] 13:18:43.576766 run osmo-stp_10.42.42.5(pid=9469): stdout: | (launched: 2022-12-09_13:18:42.090749) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:18:43.707458 run osmo-stp_10.42.42.5(pid=9469): stderr: | �[0;m�[38;5;43m20221209131842262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209131842262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209131842263 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209131842263 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209131842263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209131842263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209131842264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:18:43.833905 run osmo-stp_10.42.42.5(pid=9469): stdout: | (launched: 2022-12-09_13:18:42.090749) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:18:43.959327 run osmo-stp_10.42.42.5(pid=9469): stderr: | �[0;m�[38;5;43m20221209131842262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209131842262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209131842263 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209131842263 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209131842263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209131842263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209131842264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:18:44.104851 run patchelf(pid=9472): Terminating (SIGINT) 13:18:44.275569 run patchelf(pid=9472): Terminated: ok {rc=0} 13:18:44.306904 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9469): Process ended prematurely: osmo-stp_10.42.42.5(pid=9469) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9469)] [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8] 13:18:44.316048 tst iperf3.py:8: Test FAILED (7.4 sec) 13:18:44.376054 run osmo-hlr_10.42.42.2(pid=9466): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9466)] 13:18:44.425115 run osmo-hlr_10.42.42.2(pid=9466): stdout: | (launched: 2022-12-09_13:18:41.136567) 13:18:44.474787 run osmo-hlr_10.42.42.2(pid=9466): stderr: | �[0;m�[1;31m20221209131841315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209131841315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209131841315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209131841315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209131841315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209131841315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209131841330 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-sysmocell5000+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209131841341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209131841341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209131841341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:18:44.517334 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9461): Terminating (SIGTERM) 13:18:44.557291 run iperf3-srv_10.42.42.10(pid=9462): Terminating (SIGTERM) 13:18:44.597212 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9465): Terminating (SIGTERM) 13:18:44.637037 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9468): Terminating (SIGTERM) 13:18:44.677031 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9471): Terminating (SIGTERM) 13:18:44.686263 --- ParallelTerminationStrategy: PID 9461 died... 13:18:44.739425 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9461): Terminated: ok {rc=0} 13:18:44.748889 --- ParallelTerminationStrategy: PID 9462 died... 13:18:44.801793 run iperf3-srv_10.42.42.10(pid=9462): Terminated {rc=256} 13:18:44.811317 --- ParallelTerminationStrategy: PID 9465 died... 13:18:44.864886 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9465): Terminated: ok {rc=0} 13:18:44.874440 --- ParallelTerminationStrategy: PID 9468 died... 13:18:44.927732 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9468): Terminated: ok {rc=0} 13:18:44.937370 --- ParallelTerminationStrategy: PID 9471 died... 13:18:44.990703 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9471): Terminated: ok {rc=0} 13:18:45.074940 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9469): Process ended prematurely: osmo-stp_10.42.42.5(pid=9469) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9469)]