Failed
gprs:trx-umtrx+mod-bts0-egprs.iperf3.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10316): Process ended prematurely: osmo-stp_10.42.42.5(pid=10316) [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10316)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-umtrx+mod-bts0-egprs iperf3.py ---------------------------------------------- 13:26:53.507116 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:53.518553 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:26:53.665745 tst iperf3.py: using LAC 21769 13:26:53.793542 tst iperf3.py: using RAC 94 13:26:53.922421 tst iperf3.py: using CellId 21769 13:26:54.052284 tst iperf3.py: using BVCI 21770 13:26:54.077488 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:54.088851 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:54.100086 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:54.111900 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:54.123570 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:54.135232 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:54.147181 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:54.158842 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:54.170441 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:26:54.447756 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 13:26:54.572930 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:26:54.885328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10308): Launched 13:26:55.144747 run iperf3-srv_10.42.42.10(pid=10309): Launched 13:26:55.329113 tst iperf3.py:8: start network... 13:26:55.455244 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:26:55.937320 run create_hlr_db(pid=10310): Launched 13:26:56.109669 bus /gobi_6: Setting Powered False 13:26:57.130988 run create_hlr_db(pid=10310): Terminated: ok {rc=0} 13:26:57.531584 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10312): Launched 13:26:57.832482 run osmo-hlr_10.42.42.2(pid=10313): Launched 13:26:57.947003 run osmo-stp_10.42.42.5: Starting osmo-stp 13:26:58.477200 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10315): Launched 13:26:58.779502 run osmo-stp_10.42.42.5(pid=10316): Launched 13:26:58.889757 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:26:59.414729 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10318): Launched 13:26:59.522221 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:26:59.784503 run patchelf(pid=10319): Launched 13:26:59.960276 run osmo-stp_10.42.42.5(pid=10316): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10316)] 13:27:00.088596 run osmo-stp_10.42.42.5(pid=10316): stdout: | (launched: 2022-12-09_13:26:58.630534) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:27:00.217894 run osmo-stp_10.42.42.5(pid=10316): stderr: | �[0;m�[38;5;43m20221209132658801 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132658801 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132658802 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132658802 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132658802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132658802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132658803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:27:00.342491 run osmo-stp_10.42.42.5(pid=10316): stdout: | (launched: 2022-12-09_13:26:58.630534) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:27:00.465667 run osmo-stp_10.42.42.5(pid=10316): stderr: | �[0;m�[38;5;43m20221209132658801 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132658801 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132658802 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132658802 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132658802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132658802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132658803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:27:00.609109 run patchelf(pid=10319): Terminating (SIGINT) 13:27:00.777321 run patchelf(pid=10319): Terminated: ok {rc=0} 13:27:00.808132 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10316): Process ended prematurely: osmo-stp_10.42.42.5(pid=10316) [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10316)] [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8] 13:27:00.817365 tst iperf3.py:8: Test FAILED (7.3 sec) 13:27:00.905658 run osmo-hlr_10.42.42.2(pid=10313): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10313)] 13:27:00.956047 run osmo-hlr_10.42.42.2(pid=10313): stdout: | (launched: 2022-12-09_13:26:57.684327) 13:27:01.007001 run osmo-hlr_10.42.42.2(pid=10313): stderr: | �[0;m�[1;31m20221209132657857 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209132657857 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209132657857 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209132657858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209132657858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209132657858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209132657873 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-umtrx+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209132657882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209132657882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209132657882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:27:01.049480 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10308): Terminating (SIGTERM) 13:27:01.089553 run iperf3-srv_10.42.42.10(pid=10309): Terminating (SIGTERM) 13:27:01.132096 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10312): Terminating (SIGTERM) 13:27:01.172400 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10315): Terminating (SIGTERM) 13:27:01.212380 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10318): Terminating (SIGTERM) 13:27:01.222203 --- ParallelTerminationStrategy: PID 10308 died... 13:27:01.278043 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10308): Terminated: ok {rc=0} 13:27:01.288130 --- ParallelTerminationStrategy: PID 10309 died... 13:27:01.341882 run iperf3-srv_10.42.42.10(pid=10309): Terminated {rc=256} 13:27:01.352217 --- ParallelTerminationStrategy: PID 10312 died... 13:27:01.408091 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10312): Terminated: ok {rc=0} 13:27:01.418487 --- ParallelTerminationStrategy: PID 10315 died... 13:27:01.474221 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10315): Terminated: ok {rc=0} 13:27:01.484434 --- ParallelTerminationStrategy: PID 10318 died... 13:27:01.539269 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10318): Terminated: ok {rc=0} 13:27:01.639964 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10316): Process ended prematurely: osmo-stp_10.42.42.5(pid=10316) [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10316)]