Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 222 builds (Since #2139 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10344): Process ended prematurely: osmo-stp_10.42.42.5(pid=10344) [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10344)]

Standard Output

----------------------------------------------
trial-2360 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
13:27:22.585382 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:27:22.597398 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
13:27:22.745772 tst                          ping.py: using LAC 21771
13:27:22.868098 tst                          ping.py: using RAC 96
13:27:22.985641 tst                          ping.py: using CellId 21771
13:27:23.105711 tst                          ping.py: using BVCI 21772
13:27:23.128277 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:27:23.139232 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:27:23.149966 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:27:23.160604 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:27:23.171186 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:27:23.182043 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:27:23.192704 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:27:23.203393 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
13:27:23.490757 tst                       ping.py:19: start network...
13:27:23.623486 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:27:24.123263 run         create_hlr_db(pid=10338): Launched
13:27:24.309109 bus                          /gobi_6: Setting Powered False
13:27:25.330493 run         create_hlr_db(pid=10338): Terminated: ok {rc=0}
13:27:25.730962 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10340): Launched
13:27:26.028651 run   osmo-hlr_10.42.42.2(pid=10341): Launched
13:27:26.137215 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:27:26.653902 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10343): Launched
13:27:26.950040 run   osmo-stp_10.42.42.5(pid=10344): Launched
13:27:27.057031 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:27:27.573401 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10346): Launched
13:27:27.678503 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:27:27.936147 run              patchelf(pid=10347): Launched
13:27:28.109687 run   osmo-stp_10.42.42.5(pid=10344): ERR: Terminated: ERROR {rc=1}  [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10344)]
13:27:28.236464 run   osmo-stp_10.42.42.5(pid=10344): stdout: 
| (launched: 2022-12-09_13:27:26.803767)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:27:28.364943 run   osmo-stp_10.42.42.5(pid=10344): stderr: 
| �[0;m�[38;5;43m20221209132726973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209132726973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209132726973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209132726974 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209132726974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209132726974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209132726974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:27:28.487400 run   osmo-stp_10.42.42.5(pid=10344): stdout: 
| (launched: 2022-12-09_13:27:26.803767)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:27:28.608575 run   osmo-stp_10.42.42.5(pid=10344): stderr: 
| �[0;m�[38;5;43m20221209132726973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209132726973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209132726973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209132726974 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209132726974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209132726974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209132726974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:27:28.749671 run              patchelf(pid=10347): Terminating (SIGINT)
13:27:28.915421 run              patchelf(pid=10347): Terminated: ok {rc=0}
13:27:28.945720 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10344): Process ended prematurely: osmo-stp_10.42.42.5(pid=10344) [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10344)]  [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
13:27:28.954188 tst                       ping.py:22: Test FAILED (6.4 sec)
13:27:29.013702 run   osmo-hlr_10.42.42.2(pid=10341): ERR: Terminated: ERROR {rc=237}  [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10341)]
13:27:29.062407 run   osmo-hlr_10.42.42.2(pid=10341): stdout: 
| (launched: 2022-12-09_13:27:25.882645) 
13:27:29.111800 run   osmo-hlr_10.42.42.2(pid=10341): stderr: 
| �[0;m�[1;31m20221209132726056 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209132726056 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209132726057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209132726057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209132726057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209132726057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209132726078 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209132726088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209132726088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209132726088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:27:29.154226 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10340): Terminating (SIGTERM)
13:27:29.193732 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10343): Terminating (SIGTERM)
13:27:29.233382 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10346): Terminating (SIGTERM)
13:27:29.242278 ---      ParallelTerminationStrategy: PID 10340 died...
13:27:29.295371 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10340): Terminated: ok {rc=0}
13:27:29.305102 ---      ParallelTerminationStrategy: PID 10343 died...
13:27:29.357929 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10343): Terminated: ok {rc=0}
13:27:29.367499 ---      ParallelTerminationStrategy: PID 10346 died...
13:27:29.420222 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10346): Terminated: ok {rc=0}
13:27:29.508429 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10344): Process ended prematurely: osmo-stp_10.42.42.5(pid=10344) [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10344)]