Failed

gprs:sysmo+mod-bts0-dynts-ipa.ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)

Failing for the past 30 builds (Since #2331 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7528): Process ended prematurely: osmo-stp_10.42.42.5(pid=7528) [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7528)]

Standard Output

----------------------------------------------
trial-2360 gprs:sysmo+mod-bts0-dynts-ipa ping.py
----------------------------------------------
12:54:36.412858 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:54:36.425174 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
12:54:36.573978 tst                          ping.py: using LAC 21597
12:54:36.693703 tst                          ping.py: using RAC 177
12:54:36.813362 tst                          ping.py: using CellId 21597
12:54:36.935877 tst                          ping.py: using BVCI 21598
12:54:36.959451 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:54:36.970697 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:54:36.981536 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:54:36.992223 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:54:37.003013 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:54:37.013695 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:54:37.024621 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:54:37.035361 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
12:54:37.328617 tst                       ping.py:19: start network...
12:54:37.465260 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:54:37.983103 run          create_hlr_db(pid=7522): Launched
12:54:38.173751 bus                          /gobi_6: Setting Powered False
12:54:39.182105 run          create_hlr_db(pid=7522): Terminated: ok {rc=0}
12:54:39.630156 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7524): Launched
12:54:39.960008 run    osmo-hlr_10.42.42.2(pid=7525): Launched
12:54:40.081359 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:54:40.661429 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7527): Launched
12:54:40.989953 run    osmo-stp_10.42.42.5(pid=7528): Launched
12:54:41.108374 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:54:41.678713 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7530): Launched
12:54:41.794703 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:54:42.082659 run               patchelf(pid=7531): Launched
12:54:42.274484 run    osmo-stp_10.42.42.5(pid=7528): ERR: Terminated: ERROR {rc=1}  [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7528)]
12:54:42.413540 run    osmo-stp_10.42.42.5(pid=7528): stdout: 
| (launched: 2022-12-09_12:54:40.827425)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:54:42.553002 run    osmo-stp_10.42.42.5(pid=7528): stderr: 
| �[0;m�[38;5;43m20221209125441023 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209125441023 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209125441023 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209125441023 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209125441024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209125441024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209125441024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:54:42.687707 run    osmo-stp_10.42.42.5(pid=7528): stdout: 
| (launched: 2022-12-09_12:54:40.827425)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:54:42.821212 run    osmo-stp_10.42.42.5(pid=7528): stderr: 
| �[0;m�[38;5;43m20221209125441023 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209125441023 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209125441023 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209125441023 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209125441024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209125441024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209125441024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:54:42.976050 run               patchelf(pid=7531): Terminating (SIGINT)
12:54:43.157953 run               patchelf(pid=7531): Terminated: ok {rc=0}
12:54:43.190764 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=7528): Process ended prematurely: osmo-stp_10.42.42.5(pid=7528) [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7528)]  [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22]
12:54:43.200114 tst                       ping.py:22: Test FAILED (6.8 sec)
12:54:43.264399 run    osmo-hlr_10.42.42.2(pid=7525): ERR: Terminated: ERROR {rc=237}  [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7525)]
12:54:43.316378 run    osmo-hlr_10.42.42.2(pid=7525): stdout: 
| (launched: 2022-12-09_12:54:39.796554) 
12:54:43.368917 run    osmo-hlr_10.42.42.2(pid=7525): stderr: 
| �[0;m�[1;31m20221209125440001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209125440001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209125440001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209125440001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209125440001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209125440001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209125440012 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:sysmo+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209125440021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209125440021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209125440021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:54:43.413385 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7524): Terminating (SIGTERM)
12:54:43.455635 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7527): Terminating (SIGTERM)
12:54:43.498253 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7530): Terminating (SIGTERM)
12:54:43.508070 ---      ParallelTerminationStrategy: PID 7524 died...
12:54:43.564683 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7524): Terminated: ok {rc=0}
12:54:43.574722 ---      ParallelTerminationStrategy: PID 7527 died...
12:54:43.630617 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7527): Terminated: ok {rc=0}
12:54:43.640873 ---      ParallelTerminationStrategy: PID 7530 died...
12:54:43.697073 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7530): Terminated: ok {rc=0}
12:54:43.785076 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7528): Process ended prematurely: osmo-stp_10.42.42.5(pid=7528) [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7528)]