Failed
gprs:nanobts+band-1900.ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=23705): Process ended prematurely: osmo-stp_10.42.42.5(pid=23705) [trial-2361↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23705)]
Standard Output
---------------------------------------------- trial-2361 gprs:nanobts+band-1900 ping.py ---------------------------------------------- 16:41:04.973342 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:41:04.984668 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 16:41:05.110395 tst ping.py: using LAC 22354 16:41:05.226023 tst ping.py: using RAC 169 16:41:05.341526 tst ping.py: using CellId 22354 16:41:05.461226 tst ping.py: using BVCI 22355 16:41:05.483675 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:41:05.494383 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:41:05.504875 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:41:05.515407 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:41:05.525781 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:41:05.536158 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:41:05.546746 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:41:05.557198 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 16:41:05.836827 tst ping.py:19: start network... 16:41:05.959977 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:41:06.430226 run create_hlr_db(pid=23699): Launched 16:41:06.600135 bus /gobi_6: Setting Powered False 16:41:07.621204 run create_hlr_db(pid=23699): Terminated: ok {rc=0} 16:41:08.042282 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23701): Launched 16:41:08.358540 run osmo-hlr_10.42.42.2(pid=23702): Launched 16:41:08.476031 run osmo-stp_10.42.42.5: Starting osmo-stp 16:41:09.028290 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23704): Launched 16:41:09.346063 run osmo-stp_10.42.42.5(pid=23705): Launched 16:41:09.460934 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:41:10.012513 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23707): Launched 16:41:10.126170 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:41:10.402594 run patchelf(pid=23708): Launched 16:41:10.587957 run osmo-stp_10.42.42.5(pid=23705): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23705)] 16:41:10.724010 run osmo-stp_10.42.42.5(pid=23705): stdout: | (launched: 2022-12-09_16:41:09.190000) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:41:10.860311 run osmo-stp_10.42.42.5(pid=23705): stderr: | �[0;m�[38;5;43m20221209164109378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209164109378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209164109378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209164109378 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209164109379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209164109379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209164109379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:41:10.991745 run osmo-stp_10.42.42.5(pid=23705): stdout: | (launched: 2022-12-09_16:41:09.190000) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:41:11.122390 run osmo-stp_10.42.42.5(pid=23705): stderr: | �[0;m�[38;5;43m20221209164109378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209164109378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209164109378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209164109378 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209164109379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209164109379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209164109379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:41:11.274071 run patchelf(pid=23708): Terminating (SIGINT) 16:41:11.451153 run patchelf(pid=23708): Terminated: ok {rc=0} 16:41:11.483460 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=23705): Process ended prematurely: osmo-stp_10.42.42.5(pid=23705) [trial-2361↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23705)] [trial-2361↪gprs:nanobts+band-1900↪ping.py:22] 16:41:11.492513 tst ping.py:22: Test FAILED (6.5 sec) 16:41:11.555488 run osmo-hlr_10.42.42.2(pid=23702): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:nanobts+band-1900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23702)] 16:41:11.606483 run osmo-hlr_10.42.42.2(pid=23702): stdout: | (launched: 2022-12-09_16:41:08.203035) 16:41:11.657962 run osmo-hlr_10.42.42.2(pid=23702): stderr: | �[0;m�[1;31m20221209164108399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209164108399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209164108399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209164108399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209164108399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209164108399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209164108416 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:nanobts+band-1900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209164108426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209164108426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209164108426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:41:11.701665 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23701): Terminating (SIGTERM) 16:41:11.743791 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23704): Terminating (SIGTERM) 16:41:11.785847 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23707): Terminating (SIGTERM) 16:41:11.795607 --- ParallelTerminationStrategy: PID 23701 died... 16:41:11.851974 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23701): Terminated: ok {rc=0} 16:41:11.862188 --- ParallelTerminationStrategy: PID 23704 died... 16:41:11.918237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23704): Terminated: ok {rc=0} 16:41:11.928397 --- ParallelTerminationStrategy: PID 23707 died... 16:41:11.984073 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23707): Terminated: ok {rc=0} 16:41:12.069107 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23705): Process ended prematurely: osmo-stp_10.42.42.5(pid=23705) [trial-2361↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23705)]