Skip to content

Failed

gprs:nanobts+band-900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)

Failing for the past 223 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=24250): Process ended prematurely: osmo-stp_10.42.42.5(pid=24250) [trial-2361↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24250)]

Standard Output

----------------------------------------------
trial-2361 gprs:nanobts+band-900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
16:48:44.805773 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:48:44.817900 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
16:48:44.984037 tst                        iperf3.py: using LAC 22395
16:48:45.104791 tst                        iperf3.py: using RAC 210
16:48:45.225638 tst                        iperf3.py: using CellId 22395
16:48:45.344137 tst                        iperf3.py: using BVCI 22396
16:48:45.367381 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:48:45.378583 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:48:45.389605 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:48:45.400316 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:48:45.411299 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:48:45.422292 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:48:45.433200 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:48:45.443878 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:48:45.454817 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
16:48:45.748026 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
16:48:45.905466 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
16:48:46.265562 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24242): Launched
16:48:46.567333 run iperf3-srv_10.42.42.10(pid=24243): Launched
16:48:46.771092 tst                      iperf3.py:8: start network...
16:48:46.909522 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
16:48:47.425811 run         create_hlr_db(pid=24244): Launched
16:48:47.614043 bus                          /gobi_6: Setting Powered False
16:48:48.634290 run         create_hlr_db(pid=24244): Terminated: ok {rc=0}
16:48:49.042306 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24246): Launched
16:48:49.345314 run   osmo-hlr_10.42.42.2(pid=24247): Launched
16:48:49.461327 run              osmo-stp_10.42.42.5: Starting osmo-stp
16:48:49.987110 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24249): Launched
16:48:50.289454 run   osmo-stp_10.42.42.5(pid=24250): Launched
16:48:50.399171 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
16:48:50.924264 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24252): Launched
16:48:51.031810 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
16:48:51.295913 run              patchelf(pid=24253): Launched
16:48:51.473400 run   osmo-stp_10.42.42.5(pid=24250): ERR: Terminated: ERROR {rc=1}  [trial-2361↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24250)]
16:48:51.602885 run   osmo-stp_10.42.42.5(pid=24250): stdout: 
| (launched: 2022-12-09_16:48:50.140261)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:48:51.732475 run   osmo-stp_10.42.42.5(pid=24250): stderr: 
| �[0;m�[38;5;43m20221209164850313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209164850313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209164850314 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209164850314 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209164850314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209164850314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209164850315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:48:51.856841 run   osmo-stp_10.42.42.5(pid=24250): stdout: 
| (launched: 2022-12-09_16:48:50.140261)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:48:51.980359 run   osmo-stp_10.42.42.5(pid=24250): stderr: 
| �[0;m�[38;5;43m20221209164850313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209164850313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209164850314 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209164850314 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209164850314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209164850314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209164850315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:48:52.124733 run              patchelf(pid=24253): Terminating (SIGINT)
16:48:52.295058 run              patchelf(pid=24253): Terminated: ok {rc=0}
16:48:52.326349 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24250): Process ended prematurely: osmo-stp_10.42.42.5(pid=24250) [trial-2361↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24250)]  [trial-2361↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8]
16:48:52.335464 tst                      iperf3.py:8: Test FAILED (7.6 sec)
16:48:52.394758 run   osmo-hlr_10.42.42.2(pid=24247): ERR: Terminated: ERROR {rc=237}  [trial-2361↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24247)]
16:48:52.443080 run   osmo-hlr_10.42.42.2(pid=24247): stdout: 
| (launched: 2022-12-09_16:48:49.195924) 
16:48:52.492215 run   osmo-hlr_10.42.42.2(pid=24247): stderr: 
| �[0;m�[1;31m20221209164849374 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209164849374 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209164849374 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209164849374 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209164849374 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209164849374 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209164849386 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:nanobts+band-900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209164849395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209164849395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209164849395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
16:48:52.533706 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24242): Terminating (SIGTERM)
16:48:52.572707 run iperf3-srv_10.42.42.10(pid=24243): Terminating (SIGTERM)
16:48:52.611937 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24246): Terminating (SIGTERM)
16:48:52.651244 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24249): Terminating (SIGTERM)
16:48:52.690526 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24252): Terminating (SIGTERM)
16:48:52.699702 ---      ParallelTerminationStrategy: PID 24242 died...
16:48:52.752493 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24242): Terminated: ok {rc=0}
16:48:52.762192 ---      ParallelTerminationStrategy: PID 24243 died...
16:48:52.814493 run iperf3-srv_10.42.42.10(pid=24243): Terminated {rc=256}
16:48:52.823989 ---      ParallelTerminationStrategy: PID 24246 died...
16:48:52.876485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24246): Terminated: ok {rc=0}
16:48:52.886123 ---      ParallelTerminationStrategy: PID 24249 died...
16:48:52.939037 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24249): Terminated: ok {rc=0}
16:48:52.948551 ---      ParallelTerminationStrategy: PID 24252 died...
16:48:53.000866 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24252): Terminated: ok {rc=0}
16:48:53.083999 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24250): Process ended prematurely: osmo-stp_10.42.42.5(pid=24250) [trial-2361↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24250)]