Failed
gprs:trx-b200+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=20127): Process ended prematurely: osmo-stp_10.42.42.5(pid=20127) [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20127)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-b200+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 16:01:22.653913 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:22.665722 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:01:22.838702 tst iperf3.py: using LAC 22144 16:01:22.965057 tst iperf3.py: using RAC 214 16:01:23.090938 tst iperf3.py: using CellId 22144 16:01:23.216891 tst iperf3.py: using BVCI 22145 16:01:23.242148 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:23.253784 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:23.265113 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:23.276632 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:23.287980 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:23.299365 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:23.310989 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:23.322385 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:23.334041 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:01:23.618332 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 16:01:23.746086 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:01:24.065594 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20119): Launched 16:01:24.330500 run iperf3-srv_10.42.42.10(pid=20120): Launched 16:01:24.517943 tst iperf3.py:8: start network... 16:01:24.645094 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:01:25.137305 run create_hlr_db(pid=20121): Launched 16:01:25.314828 bus /gobi_6: Setting Powered False 16:01:26.336047 run create_hlr_db(pid=20121): Terminated: ok {rc=0} 16:01:26.775306 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20123): Launched 16:01:27.106115 run osmo-hlr_10.42.42.2(pid=20124): Launched 16:01:27.227157 run osmo-stp_10.42.42.5: Starting osmo-stp 16:01:27.798947 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20126): Launched 16:01:28.127671 run osmo-stp_10.42.42.5(pid=20127): Launched 16:01:28.246927 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:01:28.822122 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20129): Launched 16:01:28.940497 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:01:29.229648 run patchelf(pid=20130): Launched 16:01:29.422936 run osmo-stp_10.42.42.5(pid=20127): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20127)] 16:01:29.564114 run osmo-stp_10.42.42.5(pid=20127): stdout: | (launched: 2022-12-09_16:01:27.966430) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:01:29.705389 run osmo-stp_10.42.42.5(pid=20127): stderr: | �[0;m�[38;5;43m20221209160128158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160128158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160128158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160128159 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160128159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160128159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160128159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:01:29.841759 run osmo-stp_10.42.42.5(pid=20127): stdout: | (launched: 2022-12-09_16:01:27.966430) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:01:29.977152 run osmo-stp_10.42.42.5(pid=20127): stderr: | �[0;m�[38;5;43m20221209160128158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160128158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160128158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160128159 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160128159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160128159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160128159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:01:30.134646 run patchelf(pid=20130): Terminating (SIGINT) 16:01:30.319715 run patchelf(pid=20130): Terminated: ok {rc=0} 16:01:30.353518 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=20127): Process ended prematurely: osmo-stp_10.42.42.5(pid=20127) [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20127)] [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8] 16:01:30.363321 tst iperf3.py:8: Test FAILED (7.7 sec) 16:01:30.427181 run osmo-hlr_10.42.42.2(pid=20124): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20124)] 16:01:30.478770 run osmo-hlr_10.42.42.2(pid=20124): stdout: | (launched: 2022-12-09_16:01:26.943588) 16:01:30.531232 run osmo-hlr_10.42.42.2(pid=20124): stderr: | �[0;m�[1;31m20221209160127140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209160127140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209160127140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209160127140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209160127140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209160127140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209160127152 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-b200+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209160127160 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209160127160 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209160127160 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:01:30.575698 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20119): Terminating (SIGTERM) 16:01:30.618499 run iperf3-srv_10.42.42.10(pid=20120): Terminating (SIGTERM) 16:01:30.660481 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20123): Terminating (SIGTERM) 16:01:30.702748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20126): Terminating (SIGTERM) 16:01:30.745479 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20129): Terminating (SIGTERM) 16:01:30.755449 --- ParallelTerminationStrategy: PID 20119 died... 16:01:30.812122 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20119): Terminated: ok {rc=0} 16:01:30.822352 --- ParallelTerminationStrategy: PID 20120 died... 16:01:30.885302 run iperf3-srv_10.42.42.10(pid=20120): Terminated {rc=256} 16:01:30.896293 --- ParallelTerminationStrategy: PID 20123 died... 16:01:30.971871 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20123): Terminated: ok {rc=0} 16:01:30.982590 --- ParallelTerminationStrategy: PID 20126 died... 16:01:31.040436 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20126): Terminated: ok {rc=0} 16:01:31.052545 --- ParallelTerminationStrategy: PID 20129 died... 16:01:31.111335 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20129): Terminated: ok {rc=0} 16:01:31.202015 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20127): Process ended prematurely: osmo-stp_10.42.42.5(pid=20127) [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20127)]