Failed
gprs:trx-lms+mod-bts0-egprs.iperf3.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=22431): Process ended prematurely: osmo-stp_10.42.42.5(pid=22431) [trial-2361↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22431)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-lms+mod-bts0-egprs iperf3.py ---------------------------------------------- 16:26:33.807567 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:33.819502 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:26:33.965645 tst iperf3.py: using LAC 22277 16:26:34.091725 tst iperf3.py: using RAC 92 16:26:34.222969 tst iperf3.py: using CellId 22277 16:26:34.349871 tst iperf3.py: using BVCI 22278 16:26:34.374529 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:34.386122 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:34.397325 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:34.408935 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:34.420152 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:34.431509 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:34.443074 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:34.454350 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:34.465936 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:26:34.750438 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 16:26:34.876221 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:26:35.189404 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22423): Launched 16:26:35.447936 run iperf3-srv_10.42.42.10(pid=22424): Launched 16:26:35.631536 tst iperf3.py:8: start network... 16:26:35.756338 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:26:36.235106 run create_hlr_db(pid=22425): Launched 16:26:36.416619 bus /gobi_6: Setting Powered False 16:26:37.429865 run create_hlr_db(pid=22425): Terminated: ok {rc=0} 16:26:37.834847 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22427): Launched 16:26:38.136134 run osmo-hlr_10.42.42.2(pid=22428): Launched 16:26:38.254320 run osmo-stp_10.42.42.5: Starting osmo-stp 16:26:38.785814 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22430): Launched 16:26:39.087801 run osmo-stp_10.42.42.5(pid=22431): Launched 16:26:39.197361 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:26:39.722383 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22433): Launched 16:26:39.829763 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:26:40.107223 run patchelf(pid=22434): Launched 16:26:40.297314 run osmo-stp_10.42.42.5(pid=22431): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22431)] 16:26:40.435959 run osmo-stp_10.42.42.5(pid=22431): stdout: | (launched: 2022-12-09_16:26:38.939608) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:26:40.575420 run osmo-stp_10.42.42.5(pid=22431): stderr: | �[0;m�[38;5;43m20221209162639109 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209162639109 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209162639109 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209162639109 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209162639110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209162639110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209162639110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:26:40.709886 run osmo-stp_10.42.42.5(pid=22431): stdout: | (launched: 2022-12-09_16:26:38.939608) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:26:40.843005 run osmo-stp_10.42.42.5(pid=22431): stderr: | �[0;m�[38;5;43m20221209162639109 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209162639109 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209162639109 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209162639109 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209162639110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209162639110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209162639110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:26:40.997953 run patchelf(pid=22434): Terminating (SIGINT) 16:26:41.179743 run patchelf(pid=22434): Terminated: ok {rc=0} 16:26:41.213108 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22431): Process ended prematurely: osmo-stp_10.42.42.5(pid=22431) [trial-2361↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22431)] [trial-2361↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8] 16:26:41.222983 tst iperf3.py:8: Test FAILED (7.4 sec) 16:26:41.286391 run osmo-hlr_10.42.42.2(pid=22428): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22428)] 16:26:41.338045 run osmo-hlr_10.42.42.2(pid=22428): stdout: | (launched: 2022-12-09_16:26:37.988235) 16:26:41.390285 run osmo-hlr_10.42.42.2(pid=22428): stderr: | �[0;m�[1;31m20221209162638164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209162638164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209162638164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209162638164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209162638164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209162638164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209162638176 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-lms+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209162638186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209162638187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209162638187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:26:41.434290 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22423): Terminating (SIGTERM) 16:26:41.476172 run iperf3-srv_10.42.42.10(pid=22424): Terminating (SIGTERM) 16:26:41.518265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22427): Terminating (SIGTERM) 16:26:41.559920 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22430): Terminating (SIGTERM) 16:26:41.602010 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22433): Terminating (SIGTERM) 16:26:41.611789 --- ParallelTerminationStrategy: PID 22423 died... 16:26:41.668354 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22423): Terminated: ok {rc=0} 16:26:41.678631 --- ParallelTerminationStrategy: PID 22424 died... 16:26:41.734350 run iperf3-srv_10.42.42.10(pid=22424): Terminated {rc=256} 16:26:41.744629 --- ParallelTerminationStrategy: PID 22427 died... 16:26:41.800085 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22427): Terminated: ok {rc=0} 16:26:41.810459 --- ParallelTerminationStrategy: PID 22430 died... 16:26:41.866882 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22430): Terminated: ok {rc=0} 16:26:41.876916 --- ParallelTerminationStrategy: PID 22433 died... 16:26:41.933340 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22433): Terminated: ok {rc=0} 16:26:42.019097 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22431): Process ended prematurely: osmo-stp_10.42.42.5(pid=22431) [trial-2361↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22431)]