Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=20947): Process ended prematurely: osmo-stp_10.42.42.5(pid=20947) [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20947)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-sysmocell5000+mod-bts0-egprs iperf3.py ---------------------------------------------- 16:09:19.719744 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:19.732213 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:09:19.884579 tst iperf3.py: using LAC 22186 16:09:20.012137 tst iperf3.py: using RAC 1 16:09:20.139333 tst iperf3.py: using CellId 22186 16:09:20.261997 tst iperf3.py: using BVCI 22187 16:09:20.285556 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:20.296649 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:20.307653 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:20.318721 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:20.329691 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:20.340519 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:20.352085 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:20.362984 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:20.374161 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:09:20.672374 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 16:09:20.809831 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:09:21.152007 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20939): Launched 16:09:21.436375 run iperf3-srv_10.42.42.10(pid=20940): Launched 16:09:21.638888 tst iperf3.py:8: start network... 16:09:21.776441 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:09:22.297138 run create_hlr_db(pid=20941): Launched 16:09:22.488665 bus /gobi_6: Setting Powered False 16:09:23.507588 run create_hlr_db(pid=20941): Terminated: ok {rc=0} 16:09:23.922685 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20943): Launched 16:09:24.234436 run osmo-hlr_10.42.42.2(pid=20944): Launched 16:09:24.348287 run osmo-stp_10.42.42.5: Starting osmo-stp 16:09:24.885185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20946): Launched 16:09:25.193661 run osmo-stp_10.42.42.5(pid=20947): Launched 16:09:25.305895 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:09:25.844206 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20949): Launched 16:09:25.954156 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:09:26.224368 run patchelf(pid=20950): Launched 16:09:26.406229 run osmo-stp_10.42.42.5(pid=20947): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20947)] 16:09:26.539016 run osmo-stp_10.42.42.5(pid=20947): stdout: | (launched: 2022-12-09_16:09:25.041506) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:09:26.672154 run osmo-stp_10.42.42.5(pid=20947): stderr: | �[0;m�[38;5;43m20221209160925215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160925215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160925215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160925215 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160925216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160925216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160925216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:09:26.800368 run osmo-stp_10.42.42.5(pid=20947): stdout: | (launched: 2022-12-09_16:09:25.041506) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:09:26.926870 run osmo-stp_10.42.42.5(pid=20947): stderr: | �[0;m�[38;5;43m20221209160925215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160925215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160925215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160925215 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160925216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160925216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160925216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:09:27.074945 run patchelf(pid=20950): Terminating (SIGINT) 16:09:27.248867 run patchelf(pid=20950): Terminated: ok {rc=0} 16:09:27.281316 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=20947): Process ended prematurely: osmo-stp_10.42.42.5(pid=20947) [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20947)] [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8] 16:09:27.290773 tst iperf3.py:8: Test FAILED (7.6 sec) 16:09:27.351031 run osmo-hlr_10.42.42.2(pid=20944): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20944)] 16:09:27.400326 run osmo-hlr_10.42.42.2(pid=20944): stdout: | (launched: 2022-12-09_16:09:24.080192) 16:09:27.450386 run osmo-hlr_10.42.42.2(pid=20944): stderr: | �[0;m�[1;31m20221209160924257 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209160924257 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209160924257 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209160924257 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209160924257 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209160924257 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209160924269 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-sysmocell5000+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209160924277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209160924278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209160924278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:09:27.492875 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20939): Terminating (SIGTERM) 16:09:27.533246 run iperf3-srv_10.42.42.10(pid=20940): Terminating (SIGTERM) 16:09:27.573341 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20943): Terminating (SIGTERM) 16:09:27.614119 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20946): Terminating (SIGTERM) 16:09:27.654170 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20949): Terminating (SIGTERM) 16:09:27.663382 --- ParallelTerminationStrategy: PID 20939 died... 16:09:27.717057 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20939): Terminated: ok {rc=0} 16:09:27.726743 --- ParallelTerminationStrategy: PID 20940 died... 16:09:27.779891 run iperf3-srv_10.42.42.10(pid=20940): Terminated {rc=256} 16:09:27.789841 --- ParallelTerminationStrategy: PID 20943 died... 16:09:27.843277 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20943): Terminated: ok {rc=0} 16:09:27.852883 --- ParallelTerminationStrategy: PID 20946 died... 16:09:27.905979 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20946): Terminated: ok {rc=0} 16:09:27.915499 --- ParallelTerminationStrategy: PID 20949 died... 16:09:27.968722 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20949): Terminated: ok {rc=0} 16:09:28.057650 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20947): Process ended prematurely: osmo-stp_10.42.42.5(pid=20947) [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20947)]