Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 223 builds (Since #2139 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=21558): Process ended prematurely: osmo-stp_10.42.42.5(pid=21558) [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21558)]

Standard Output

----------------------------------------------
trial-2361 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
16:18:09.345340 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
16:18:09.357069 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
16:18:09.498108 tst                          ping.py: using LAC 22232
16:18:09.615816 tst                          ping.py: using RAC 47
16:18:09.741596 tst                          ping.py: using CellId 22232
16:18:09.869234 tst                          ping.py: using BVCI 22233
16:18:09.892411 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
16:18:09.903434 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
16:18:09.914323 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
16:18:09.925149 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
16:18:09.935802 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
16:18:09.946520 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
16:18:09.957641 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
16:18:09.968296 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
16:18:10.265820 tst                       ping.py:19: start network...
16:18:10.403051 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
16:18:10.917740 run         create_hlr_db(pid=21552): Launched
16:18:11.107126 bus                          /gobi_6: Setting Powered False
16:18:12.128433 run         create_hlr_db(pid=21552): Terminated: ok {rc=0}
16:18:12.543103 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21554): Launched
16:18:12.850802 run   osmo-hlr_10.42.42.2(pid=21555): Launched
16:18:12.974368 run              osmo-stp_10.42.42.5: Starting osmo-stp
16:18:13.514000 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21557): Launched
16:18:13.819770 run   osmo-stp_10.42.42.5(pid=21558): Launched
16:18:13.930195 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
16:18:14.459657 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21560): Launched
16:18:14.567993 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
16:18:14.834407 run              patchelf(pid=21561): Launched
16:18:15.013774 run   osmo-stp_10.42.42.5(pid=21558): ERR: Terminated: ERROR {rc=1}  [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21558)]
16:18:15.144205 run   osmo-stp_10.42.42.5(pid=21558): stdout: 
| (launched: 2022-12-09_16:18:13.668789)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:18:15.274523 run   osmo-stp_10.42.42.5(pid=21558): stderr: 
| �[0;m�[38;5;43m20221209161813842 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209161813842 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209161813843 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209161813843 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209161813843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209161813843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209161813843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:18:15.400156 run   osmo-stp_10.42.42.5(pid=21558): stdout: 
| (launched: 2022-12-09_16:18:13.668789)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:18:15.524545 run   osmo-stp_10.42.42.5(pid=21558): stderr: 
| �[0;m�[38;5;43m20221209161813842 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209161813842 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209161813843 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209161813843 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209161813843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209161813843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209161813843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:18:15.669423 run              patchelf(pid=21561): Terminating (SIGINT)
16:18:15.844874 run              patchelf(pid=21561): Terminated: ok {rc=0}
16:18:15.879831 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=21558): Process ended prematurely: osmo-stp_10.42.42.5(pid=21558) [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21558)]  [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
16:18:15.891653 tst                       ping.py:22: Test FAILED (6.5 sec)
16:18:15.972678 run   osmo-hlr_10.42.42.2(pid=21555): ERR: Terminated: ERROR {rc=237}  [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21555)]
16:18:16.026843 run   osmo-hlr_10.42.42.2(pid=21555): stdout: 
| (launched: 2022-12-09_16:18:12.699231) 
16:18:16.087888 run   osmo-hlr_10.42.42.2(pid=21555): stderr: 
| �[0;m�[1;31m20221209161812876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209161812876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209161812876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209161812876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209161812876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209161812876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209161812889 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209161812898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209161812898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209161812898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
16:18:16.140643 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21554): Terminating (SIGTERM)
16:18:16.200531 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21557): Terminating (SIGTERM)
16:18:16.241938 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21560): Terminating (SIGTERM)
16:18:16.251307 ---      ParallelTerminationStrategy: PID 21554 died...
16:18:16.305807 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21554): Terminated: ok {rc=0}
16:18:16.317329 ---      ParallelTerminationStrategy: PID 21557 died...
16:18:16.376940 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21557): Terminated: ok {rc=0}
16:18:16.389254 ---      ParallelTerminationStrategy: PID 21560 died...
16:18:16.449440 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21560): Terminated: ok {rc=0}
16:18:16.540404 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21558): Process ended prematurely: osmo-stp_10.42.42.5(pid=21558) [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21558)]