Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18798): Process ended prematurely: osmo-stp_10.42.42.5(pid=18798) [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18798)]
Standard Output
---------------------------------------------- trial-2361 gprs:sysmo+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 15:46:23.162659 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:23.174443 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 15:46:23.325387 tst ping.py: using LAC 22063 15:46:23.451046 tst ping.py: using RAC 133 15:46:23.580180 tst ping.py: using CellId 22063 15:46:23.701518 tst ping.py: using BVCI 22064 15:46:23.725580 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:23.736887 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:23.747959 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:23.759262 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:23.770531 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:23.781708 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:23.793255 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:23.804381 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:46:24.093961 tst ping.py:19: start network... 15:46:24.225922 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:46:24.721892 run create_hlr_db(pid=18792): Launched 15:46:24.905329 bus /gobi_6: Setting Powered False 15:46:25.924812 run create_hlr_db(pid=18792): Terminated: ok {rc=0} 15:46:26.321782 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18794): Launched 15:46:26.616538 run osmo-hlr_10.42.42.2(pid=18795): Launched 15:46:26.727805 run osmo-stp_10.42.42.5: Starting osmo-stp 15:46:27.239563 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18797): Launched 15:46:27.533836 run osmo-stp_10.42.42.5(pid=18798): Launched 15:46:27.640565 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:46:28.152802 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18800): Launched 15:46:28.256821 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:46:28.513118 run patchelf(pid=18801): Launched 15:46:28.685447 run osmo-stp_10.42.42.5(pid=18798): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18798)] 15:46:28.811280 run osmo-stp_10.42.42.5(pid=18798): stdout: | (launched: 2022-12-09_15:46:27.387984) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:46:28.937624 run osmo-stp_10.42.42.5(pid=18798): stderr: | �[0;m�[38;5;43m20221209154627557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209154627557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209154627557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209154627558 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209154627558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209154627558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209154627558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:46:29.059356 run osmo-stp_10.42.42.5(pid=18798): stdout: | (launched: 2022-12-09_15:46:27.387984) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:46:29.179445 run osmo-stp_10.42.42.5(pid=18798): stderr: | �[0;m�[38;5;43m20221209154627557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209154627557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209154627557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209154627558 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209154627558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209154627558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209154627558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:46:29.319556 run patchelf(pid=18801): Terminating (SIGINT) 15:46:29.484147 run patchelf(pid=18801): Terminated: ok {rc=0} 15:46:29.514135 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18798): Process ended prematurely: osmo-stp_10.42.42.5(pid=18798) [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18798)] [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22] 15:46:29.522622 tst ping.py:22: Test FAILED (6.3 sec) 15:46:29.582273 run osmo-hlr_10.42.42.2(pid=18795): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18795)] 15:46:29.631187 run osmo-hlr_10.42.42.2(pid=18795): stdout: | (launched: 2022-12-09_15:46:26.471056) 15:46:29.680775 run osmo-hlr_10.42.42.2(pid=18795): stderr: | �[0;m�[1;31m20221209154626648 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209154626649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209154626649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209154626649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209154626649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209154626649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209154626662 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:sysmo+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209154626670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209154626670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209154626670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:46:29.722986 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18794): Terminating (SIGTERM) 15:46:29.762519 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18797): Terminating (SIGTERM) 15:46:29.802624 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18800): Terminating (SIGTERM) 15:46:29.811805 --- ParallelTerminationStrategy: PID 18794 died... 15:46:29.864608 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18794): Terminated: ok {rc=0} 15:46:29.874143 --- ParallelTerminationStrategy: PID 18797 died... 15:46:29.926560 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18797): Terminated: ok {rc=0} 15:46:29.935968 --- ParallelTerminationStrategy: PID 18800 died... 15:46:29.988381 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18800): Terminated: ok {rc=0} 15:46:30.071363 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18798): Process ended prematurely: osmo-stp_10.42.42.5(pid=18798) [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18798)]