Failed
gprs:nanobts+band-900.ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=322): Process ended prematurely: osmo-stp_10.42.42.5(pid=322) [trial-2362↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=322)]
Standard Output
---------------------------------------------- trial-2362 gprs:nanobts+band-900 ping.py ---------------------------------------------- 18:20:32.577019 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:32.588253 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 18:20:32.721171 tst ping.py: using LAC 22848 18:20:32.843711 tst ping.py: using RAC 153 18:20:32.966286 tst ping.py: using CellId 22848 18:20:33.090967 tst ping.py: using BVCI 22849 18:20:33.114949 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:33.126088 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:33.137512 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:33.148363 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:33.159206 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:33.170010 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:33.181243 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:33.191955 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 18:20:33.461185 tst ping.py:19: start network... 18:20:33.582793 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:20:34.058625 run create_hlr_db(pid=316): Launched 18:20:34.241651 bus /gobi_6: Setting Powered False 18:20:35.262415 run create_hlr_db(pid=316): Terminated: ok {rc=0} 18:20:35.679722 run pcap-recorder_any(filters='host 10.42.42.2')(pid=318): Launched 18:20:35.993519 run osmo-hlr_10.42.42.2(pid=319): Launched 18:20:36.110935 run osmo-stp_10.42.42.5: Starting osmo-stp 18:20:36.656999 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=321): Launched 18:20:36.969290 run osmo-stp_10.42.42.5(pid=322): Launched 18:20:37.081790 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:20:37.629840 run pcap-recorder_any(filters='host 10.42.42.6')(pid=324): Launched 18:20:37.741144 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:20:38.015066 run patchelf(pid=325): Launched 18:20:38.199923 run osmo-stp_10.42.42.5(pid=322): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=322)] 18:20:38.335084 run osmo-stp_10.42.42.5(pid=322): stdout: | (launched: 2022-12-09_18:20:36.815974) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:20:38.470545 run osmo-stp_10.42.42.5(pid=322): stderr: | �[0;m�[38;5;43m20221209182037008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209182037008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209182037009 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209182037009 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209182037010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209182037010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209182037010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:20:38.601032 run osmo-stp_10.42.42.5(pid=322): stdout: | (launched: 2022-12-09_18:20:36.815974) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:20:38.729869 run osmo-stp_10.42.42.5(pid=322): stderr: | �[0;m�[38;5;43m20221209182037008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209182037008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209182037009 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209182037009 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209182037010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209182037010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209182037010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:20:38.879453 run patchelf(pid=325): Terminating (SIGINT) 18:20:39.055800 run patchelf(pid=325): Terminated: ok {rc=0} 18:20:39.087915 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=322): Process ended prematurely: osmo-stp_10.42.42.5(pid=322) [trial-2362↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=322)] [trial-2362↪gprs:nanobts+band-900↪ping.py:22] 18:20:39.097138 tst ping.py:22: Test FAILED (6.5 sec) 18:20:39.160544 run osmo-hlr_10.42.42.2(pid=319): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:nanobts+band-900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=319)] 18:20:39.212205 run osmo-hlr_10.42.42.2(pid=319): stdout: | (launched: 2022-12-09_18:20:35.838957) 18:20:39.263907 run osmo-hlr_10.42.42.2(pid=319): stderr: | �[0;m�[1;31m20221209182036039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209182036039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209182036040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209182036040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209182036040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209182036040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209182036052 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:nanobts+band-900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209182036060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209182036061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209182036061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:20:39.307860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=318): Terminating (SIGTERM) 18:20:39.349597 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=321): Terminating (SIGTERM) 18:20:39.391252 run pcap-recorder_any(filters='host 10.42.42.6')(pid=324): Terminating (SIGTERM) 18:20:39.400999 --- ParallelTerminationStrategy: PID 318 died... 18:20:39.457143 run pcap-recorder_any(filters='host 10.42.42.2')(pid=318): Terminated: ok {rc=0} 18:20:39.467331 --- ParallelTerminationStrategy: PID 321 died... 18:20:39.522989 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=321): Terminated: ok {rc=0} 18:20:39.533180 --- ParallelTerminationStrategy: PID 324 died... 18:20:39.588630 run pcap-recorder_any(filters='host 10.42.42.6')(pid=324): Terminated: ok {rc=0} 18:20:39.674880 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=322): Process ended prematurely: osmo-stp_10.42.42.5(pid=322) [trial-2362↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=322)]