Failed
gprs:sysmo+mod-bts0-dynts-osmo.iperf3.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=26270): Process ended prematurely: osmo-stp_10.42.42.5(pid=26270) [trial-2362↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26270)]
Standard Output
---------------------------------------------- trial-2362 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 17:19:14.626408 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:19:14.638053 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:19:14.788002 tst iperf3.py: using LAC 22522 17:19:14.913679 tst iperf3.py: using RAC 82 17:19:15.033646 tst iperf3.py: using CellId 22522 17:19:15.153534 tst iperf3.py: using BVCI 22523 17:19:15.177494 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:19:15.188450 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:19:15.199338 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:19:15.210706 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:19:15.221764 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:19:15.232809 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:19:15.244040 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:19:15.255103 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:19:15.266316 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:19:15.548544 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 17:19:15.678495 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:19:16.055548 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26262): Launched 17:19:16.356624 run iperf3-srv_10.42.42.10(pid=26263): Launched 17:19:16.567915 tst iperf3.py:8: start network... 17:19:16.712170 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:19:17.250730 run create_hlr_db(pid=26264): Launched 17:19:17.429571 bus /gobi_6: Setting Powered False 17:19:18.451375 run create_hlr_db(pid=26264): Terminated: ok {rc=0} 17:19:18.894973 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26266): Launched 17:19:19.229569 run osmo-hlr_10.42.42.2(pid=26267): Launched 17:19:19.353858 run osmo-stp_10.42.42.5: Starting osmo-stp 17:19:19.932076 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26269): Launched 17:19:20.265369 run osmo-stp_10.42.42.5(pid=26270): Launched 17:19:20.386237 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:19:20.965983 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26272): Launched 17:19:21.083746 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:19:21.376654 run patchelf(pid=26273): Launched 17:19:21.571059 run osmo-stp_10.42.42.5(pid=26270): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26270)] 17:19:21.712812 run osmo-stp_10.42.42.5(pid=26270): stdout: | (launched: 2022-12-09_17:19:20.101363) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:19:21.854828 run osmo-stp_10.42.42.5(pid=26270): stderr: | �[0;m�[38;5;43m20221209171920296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209171920297 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209171920297 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209171920297 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209171920298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209171920298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209171920298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:19:21.992171 run osmo-stp_10.42.42.5(pid=26270): stdout: | (launched: 2022-12-09_17:19:20.101363) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:19:22.128236 run osmo-stp_10.42.42.5(pid=26270): stderr: | �[0;m�[38;5;43m20221209171920296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209171920297 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209171920297 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209171920297 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209171920298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209171920298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209171920298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:19:22.286629 run patchelf(pid=26273): Terminating (SIGINT) 17:19:22.472313 run patchelf(pid=26273): Terminated: ok {rc=0} 17:19:22.506547 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=26270): Process ended prematurely: osmo-stp_10.42.42.5(pid=26270) [trial-2362↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26270)] [trial-2362↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8] 17:19:22.516577 tst iperf3.py:8: Test FAILED (7.9 sec) 17:19:22.579893 run osmo-hlr_10.42.42.2(pid=26267): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26267)] 17:19:22.631754 run osmo-hlr_10.42.42.2(pid=26267): stdout: | (launched: 2022-12-09_17:19:19.063649) 17:19:22.684419 run osmo-hlr_10.42.42.2(pid=26267): stderr: | �[0;m�[1;31m20221209171919265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209171919265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209171919265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209171919265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209171919265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209171919265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209171919278 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209171919287 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209171919287 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209171919287 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:19:22.729510 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26262): Terminating (SIGTERM) 17:19:22.771839 run iperf3-srv_10.42.42.10(pid=26263): Terminating (SIGTERM) 17:19:22.814729 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26266): Terminating (SIGTERM) 17:19:22.857431 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26269): Terminating (SIGTERM) 17:19:22.899739 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26272): Terminating (SIGTERM) 17:19:22.909618 --- ParallelTerminationStrategy: PID 26262 died... 17:19:22.966401 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26262): Terminated: ok {rc=0} 17:19:22.976754 --- ParallelTerminationStrategy: PID 26263 died... 17:19:23.033126 run iperf3-srv_10.42.42.10(pid=26263): Terminated {rc=256} 17:19:23.043390 --- ParallelTerminationStrategy: PID 26266 died... 17:19:23.099774 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26266): Terminated: ok {rc=0} 17:19:23.110386 --- ParallelTerminationStrategy: PID 26269 died... 17:19:23.166791 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26269): Terminated: ok {rc=0} 17:19:23.177047 --- ParallelTerminationStrategy: PID 26272 died... 17:19:23.233342 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26272): Terminated: ok {rc=0} 17:19:23.321119 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26270): Process ended prematurely: osmo-stp_10.42.42.5(pid=26270) [trial-2362↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26270)]