Failed
gprs:sysmo+mod-bts0-egprs.iperf3.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26136): Process ended prematurely: osmo-stp_10.42.42.5(pid=26136) [trial-2362↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26136)]
Standard Output
---------------------------------------------- trial-2362 gprs:sysmo+mod-bts0-egprs iperf3.py ---------------------------------------------- 17:17:12.390276 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:12.401907 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:17:12.531037 tst iperf3.py: using LAC 22512 17:17:12.654195 tst iperf3.py: using RAC 72 17:17:12.775357 tst iperf3.py: using CellId 22512 17:17:12.897750 tst iperf3.py: using BVCI 22513 17:17:12.921421 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:12.932252 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:12.942922 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:12.953903 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:12.964818 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:12.975972 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:12.987584 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:12.998829 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:13.010230 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:17:13.295092 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 17:17:13.423582 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:17:13.745347 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26128): Launched 17:17:14.021848 run iperf3-srv_10.42.42.10(pid=26129): Launched 17:17:14.225671 tst iperf3.py:8: start network... 17:17:14.364785 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:17:14.894611 run create_hlr_db(pid=26130): Launched 17:17:15.086871 bus /gobi_6: Setting Powered False 17:17:16.104362 run create_hlr_db(pid=26130): Terminated: ok {rc=0} 17:17:16.551077 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26132): Launched 17:17:16.938258 run osmo-hlr_10.42.42.2(pid=26133): Launched 17:17:17.117412 run osmo-stp_10.42.42.5: Starting osmo-stp 17:17:17.749607 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26135): Launched 17:17:18.058873 run osmo-stp_10.42.42.5(pid=26136): Launched 17:17:18.171685 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:17:18.714578 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26138): Launched 17:17:18.824371 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:17:19.096442 run patchelf(pid=26139): Launched 17:17:19.277856 run osmo-stp_10.42.42.5(pid=26136): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26136)] 17:17:19.410444 run osmo-stp_10.42.42.5(pid=26136): stdout: | (launched: 2022-12-09_17:17:17.905992) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:17:19.543113 run osmo-stp_10.42.42.5(pid=26136): stderr: | �[0;m�[38;5;43m20221209171718077 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209171718078 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209171718078 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209171718078 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209171718080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209171718081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209171718081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:17:19.671078 run osmo-stp_10.42.42.5(pid=26136): stdout: | (launched: 2022-12-09_17:17:17.905992) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:17:19.797622 run osmo-stp_10.42.42.5(pid=26136): stderr: | �[0;m�[38;5;43m20221209171718077 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209171718078 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209171718078 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209171718078 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209171718080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209171718081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209171718081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:17:19.945779 run patchelf(pid=26139): Terminating (SIGINT) 17:17:20.119544 run patchelf(pid=26139): Terminated: ok {rc=0} 17:17:20.151404 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=26136): Process ended prematurely: osmo-stp_10.42.42.5(pid=26136) [trial-2362↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26136)] [trial-2362↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8] 17:17:20.160662 tst iperf3.py:8: Test FAILED (7.8 sec) 17:17:20.221806 run osmo-hlr_10.42.42.2(pid=26133): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:sysmo+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26133)] 17:17:20.271512 run osmo-hlr_10.42.42.2(pid=26133): stdout: | (launched: 2022-12-09_17:17:16.713582) 17:17:20.321974 run osmo-hlr_10.42.42.2(pid=26133): stderr: | �[0;m�[1;31m20221209171717084 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209171717084 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209171717084 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209171717084 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209171717084 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209171717084 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209171717106 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:sysmo+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209171717127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209171717127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209171717127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:17:20.364571 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26128): Terminating (SIGTERM) 17:17:20.404521 run iperf3-srv_10.42.42.10(pid=26129): Terminating (SIGTERM) 17:17:20.444981 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26132): Terminating (SIGTERM) 17:17:20.485316 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26135): Terminating (SIGTERM) 17:17:20.525988 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26138): Terminating (SIGTERM) 17:17:20.535572 --- ParallelTerminationStrategy: PID 26128 died... 17:17:20.590053 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26128): Terminated: ok {rc=0} 17:17:20.600032 --- ParallelTerminationStrategy: PID 26129 died... 17:17:20.653493 run iperf3-srv_10.42.42.10(pid=26129): Terminated {rc=256} 17:17:20.663725 --- ParallelTerminationStrategy: PID 26132 died... 17:17:20.717541 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26132): Terminated: ok {rc=0} 17:17:20.727565 --- ParallelTerminationStrategy: PID 26135 died... 17:17:20.781591 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26135): Terminated: ok {rc=0} 17:17:20.791666 --- ParallelTerminationStrategy: PID 26138 died... 17:17:20.845531 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26138): Terminated: ok {rc=0} 17:17:20.934373 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26136): Process ended prematurely: osmo-stp_10.42.42.5(pid=26136) [trial-2362↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26136)]