Failed
gprs:trx-b200+mod-bts0-egprs.iperf3.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28091): Process ended prematurely: osmo-stp_10.42.42.5(pid=28091) [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28091)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-b200+mod-bts0-egprs iperf3.py ---------------------------------------------- 17:33:45.655611 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:45.667522 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:33:45.815623 tst iperf3.py: using LAC 22600 17:33:45.950948 tst iperf3.py: using RAC 160 17:33:46.105484 tst iperf3.py: using CellId 22600 17:33:46.234629 tst iperf3.py: using BVCI 22601 17:33:46.261201 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:46.273581 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:46.285634 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:46.297553 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:46.309491 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:46.321346 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:46.333306 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:46.345260 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:46.357280 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:33:46.660763 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 17:33:46.799862 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:33:47.179881 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28083): Launched 17:33:47.448786 run iperf3-srv_10.42.42.10(pid=28084): Launched 17:33:47.635441 tst iperf3.py:8: start network... 17:33:47.762740 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:33:48.243302 run create_hlr_db(pid=28085): Launched 17:33:48.418616 bus /gobi_6: Setting Powered False 17:33:49.440211 run create_hlr_db(pid=28085): Terminated: ok {rc=0} 17:33:49.847567 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28087): Launched 17:33:50.153332 run osmo-hlr_10.42.42.2(pid=28088): Launched 17:33:50.265430 run osmo-stp_10.42.42.5: Starting osmo-stp 17:33:50.797652 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28090): Launched 17:33:51.104074 run osmo-stp_10.42.42.5(pid=28091): Launched 17:33:51.215802 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:33:51.747544 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28093): Launched 17:33:51.856423 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:33:52.122591 run patchelf(pid=28094): Launched 17:33:52.302177 run osmo-stp_10.42.42.5(pid=28091): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28091)] 17:33:52.433267 run osmo-stp_10.42.42.5(pid=28091): stdout: | (launched: 2022-12-09_17:33:50.952416) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:33:52.564783 run osmo-stp_10.42.42.5(pid=28091): stderr: | �[0;m�[38;5;43m20221209173351124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209173351124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209173351124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209173351125 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209173351125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209173351125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209173351125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:33:52.691217 run osmo-stp_10.42.42.5(pid=28091): stdout: | (launched: 2022-12-09_17:33:50.952416) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:33:52.816548 run osmo-stp_10.42.42.5(pid=28091): stderr: | �[0;m�[38;5;43m20221209173351124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209173351124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209173351124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209173351125 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209173351125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209173351125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209173351125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:33:52.963164 run patchelf(pid=28094): Terminating (SIGINT) 17:33:53.134789 run patchelf(pid=28094): Terminated: ok {rc=0} 17:33:53.166406 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=28091): Process ended prematurely: osmo-stp_10.42.42.5(pid=28091) [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28091)] [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8] 17:33:53.175755 tst iperf3.py:8: Test FAILED (7.6 sec) 17:33:53.236903 run osmo-hlr_10.42.42.2(pid=28088): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28088)] 17:33:53.286811 run osmo-hlr_10.42.42.2(pid=28088): stdout: | (launched: 2022-12-09_17:33:50.002386) 17:33:53.337580 run osmo-hlr_10.42.42.2(pid=28088): stderr: | �[0;m�[1;31m20221209173350180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209173350180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209173350180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209173350180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209173350180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209173350180 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209173350195 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-b200+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209173350205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209173350205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209173350205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:33:53.380390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28083): Terminating (SIGTERM) 17:33:53.420830 run iperf3-srv_10.42.42.10(pid=28084): Terminating (SIGTERM) 17:33:53.462066 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28087): Terminating (SIGTERM) 17:33:53.502307 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28090): Terminating (SIGTERM) 17:33:53.542652 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28093): Terminating (SIGTERM) 17:33:53.552249 --- ParallelTerminationStrategy: PID 28083 died... 17:33:53.606953 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28083): Terminated: ok {rc=0} 17:33:53.616500 --- ParallelTerminationStrategy: PID 28084 died... 17:33:53.670529 run iperf3-srv_10.42.42.10(pid=28084): Terminated {rc=256} 17:33:53.680210 --- ParallelTerminationStrategy: PID 28087 died... 17:33:53.734341 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28087): Terminated: ok {rc=0} 17:33:53.744470 --- ParallelTerminationStrategy: PID 28090 died... 17:33:53.798121 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28090): Terminated: ok {rc=0} 17:33:53.808105 --- ParallelTerminationStrategy: PID 28093 died... 17:33:53.861892 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28093): Terminated: ok {rc=0} 17:33:53.951194 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28091): Process ended prematurely: osmo-stp_10.42.42.5(pid=28091) [trial-2362↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28091)]