Failed
gprs:trx-lms+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=31150): Process ended prematurely: osmo-stp_10.42.42.5(pid=31150) [trial-2362↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31150)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-lms+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 18:00:53.886696 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:00:53.898925 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:00:54.066056 tst iperf3.py: using LAC 22743 18:00:54.193875 tst iperf3.py: using RAC 48 18:00:54.321296 tst iperf3.py: using CellId 22743 18:00:54.449408 tst iperf3.py: using BVCI 22744 18:00:54.474448 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:00:54.485828 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:00:54.497016 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:00:54.508205 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:00:54.519380 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:00:54.530673 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:00:54.541959 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:00:54.553397 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:00:54.564689 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:00:54.861144 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:00:54.997801 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:00:55.337717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31142): Launched 18:00:55.619057 run iperf3-srv_10.42.42.10(pid=31143): Launched 18:00:55.819206 tst iperf3.py:8: start network... 18:00:55.955542 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:00:56.470431 run create_hlr_db(pid=31144): Launched 18:00:56.648346 bus /gobi_6: Setting Powered False 18:00:57.668792 run create_hlr_db(pid=31144): Terminated: ok {rc=0} 18:00:58.079638 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31146): Launched 18:00:58.387572 run osmo-hlr_10.42.42.2(pid=31147): Launched 18:00:58.506229 run osmo-stp_10.42.42.5: Starting osmo-stp 18:00:59.048732 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31149): Launched 18:00:59.357178 run osmo-stp_10.42.42.5(pid=31150): Launched 18:00:59.469117 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:01:00.004339 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31152): Launched 18:01:00.113456 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:01:00.381295 run patchelf(pid=31153): Launched 18:01:00.561376 run osmo-stp_10.42.42.5(pid=31150): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31150)] 18:01:00.692937 run osmo-stp_10.42.42.5(pid=31150): stdout: | (launched: 2022-12-09_18:00:59.204431) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:01:00.824646 run osmo-stp_10.42.42.5(pid=31150): stderr: | �[0;m�[38;5;43m20221209180059376 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209180059376 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209180059377 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209180059377 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209180059378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209180059378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209180059378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:01:00.954417 run osmo-stp_10.42.42.5(pid=31150): stdout: | (launched: 2022-12-09_18:00:59.204431) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:01:01.085804 run osmo-stp_10.42.42.5(pid=31150): stderr: | �[0;m�[38;5;43m20221209180059376 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209180059376 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209180059377 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209180059377 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209180059378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209180059378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209180059378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:01:01.236309 run patchelf(pid=31153): Terminating (SIGINT) 18:01:01.413812 run patchelf(pid=31153): Terminated: ok {rc=0} 18:01:01.446899 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=31150): Process ended prematurely: osmo-stp_10.42.42.5(pid=31150) [trial-2362↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31150)] [trial-2362↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8] 18:01:01.457242 tst iperf3.py:8: Test FAILED (7.6 sec) 18:01:01.523038 run osmo-hlr_10.42.42.2(pid=31147): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31147)] 18:01:01.575215 run osmo-hlr_10.42.42.2(pid=31147): stdout: | (launched: 2022-12-09_18:00:58.235527) 18:01:01.627077 run osmo-hlr_10.42.42.2(pid=31147): stderr: | �[0;m�[1;31m20221209180058415 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209180058415 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209180058415 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209180058416 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209180058416 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209180058416 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209180058427 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-lms+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209180058436 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209180058436 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209180058436 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:01:01.673476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31142): Terminating (SIGTERM) 18:01:01.717181 run iperf3-srv_10.42.42.10(pid=31143): Terminating (SIGTERM) 18:01:01.761891 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31146): Terminating (SIGTERM) 18:01:01.805705 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31149): Terminating (SIGTERM) 18:01:01.851258 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31152): Terminating (SIGTERM) 18:01:01.862540 --- ParallelTerminationStrategy: PID 31142 died... 18:01:01.920177 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31142): Terminated: ok {rc=0} 18:01:01.931022 --- ParallelTerminationStrategy: PID 31143 died... 18:01:01.987801 run iperf3-srv_10.42.42.10(pid=31143): Terminated {rc=256} 18:01:01.998554 --- ParallelTerminationStrategy: PID 31146 died... 18:01:02.055600 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31146): Terminated: ok {rc=0} 18:01:02.066557 --- ParallelTerminationStrategy: PID 31149 died... 18:01:02.121842 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31149): Terminated: ok {rc=0} 18:01:02.133525 --- ParallelTerminationStrategy: PID 31152 died... 18:01:02.190343 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31152): Terminated: ok {rc=0} 18:01:02.276189 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31150): Process ended prematurely: osmo-stp_10.42.42.5(pid=31150) [trial-2362↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31150)]