Failed
gprs:trx-lms+mod-bts0-egprs.iperf3.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31036): Process ended prematurely: osmo-stp_10.42.42.5(pid=31036) [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31036)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-lms+mod-bts0-egprs iperf3.py ---------------------------------------------- 17:59:53.811299 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:53.822902 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:59:53.965177 tst iperf3.py: using LAC 22738 17:59:54.086729 tst iperf3.py: using RAC 43 17:59:54.209846 tst iperf3.py: using CellId 22738 17:59:54.328535 tst iperf3.py: using BVCI 22739 17:59:54.352054 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:54.363112 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:54.373846 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:54.384798 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:54.395659 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:54.406663 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:54.417817 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:54.428543 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:54.439643 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:59:54.721804 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 17:59:54.849011 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:59:55.168628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31028): Launched 17:59:55.432391 run iperf3-srv_10.42.42.10(pid=31029): Launched 17:59:55.618261 tst iperf3.py:8: start network... 17:59:55.745135 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:59:56.226541 run create_hlr_db(pid=31030): Launched 17:59:56.410909 bus /gobi_6: Setting Powered False 17:59:57.424876 run create_hlr_db(pid=31030): Terminated: ok {rc=0} 17:59:57.836784 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31032): Launched 17:59:58.145360 run osmo-hlr_10.42.42.2(pid=31033): Launched 17:59:58.264233 run osmo-stp_10.42.42.5: Starting osmo-stp 17:59:58.804596 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31035): Launched 17:59:59.111831 run osmo-stp_10.42.42.5(pid=31036): Launched 17:59:59.224447 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:59:59.759437 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31038): Launched 17:59:59.868893 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:00:00.136279 run patchelf(pid=31039): Launched 18:00:00.315690 run osmo-stp_10.42.42.5(pid=31036): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31036)] 18:00:00.446909 run osmo-stp_10.42.42.5(pid=31036): stdout: | (launched: 2022-12-09_17:59:58.960099) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:00:00.578959 run osmo-stp_10.42.42.5(pid=31036): stderr: | �[0;m�[38;5;43m20221209175959132 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209175959132 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209175959132 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209175959132 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209175959133 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209175959133 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209175959133 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:00:00.705977 run osmo-stp_10.42.42.5(pid=31036): stdout: | (launched: 2022-12-09_17:59:58.960099) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:00:00.831790 run osmo-stp_10.42.42.5(pid=31036): stderr: | �[0;m�[38;5;43m20221209175959132 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209175959132 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209175959132 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209175959132 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209175959133 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209175959133 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209175959133 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:00:00.987741 run patchelf(pid=31039): Terminating (SIGINT) 18:00:01.164007 run patchelf(pid=31039): Terminated: ok {rc=0} 18:00:01.197095 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=31036): Process ended prematurely: osmo-stp_10.42.42.5(pid=31036) [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31036)] [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8] 18:00:01.207609 tst iperf3.py:8: Test FAILED (7.4 sec) 18:00:01.271617 run osmo-hlr_10.42.42.2(pid=31033): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31033)] 18:00:01.322858 run osmo-hlr_10.42.42.2(pid=31033): stdout: | (launched: 2022-12-09_17:59:57.993319) 18:00:01.375511 run osmo-hlr_10.42.42.2(pid=31033): stderr: | �[0;m�[1;31m20221209175958173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209175958173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209175958173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209175958174 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209175958174 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209175958174 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209175958186 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-lms+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209175958194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209175958194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209175958194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:00:01.419354 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31028): Terminating (SIGTERM) 18:00:01.466247 run iperf3-srv_10.42.42.10(pid=31029): Terminating (SIGTERM) 18:00:01.515096 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31032): Terminating (SIGTERM) 18:00:01.556637 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31035): Terminating (SIGTERM) 18:00:01.599438 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31038): Terminating (SIGTERM) 18:00:01.609371 --- ParallelTerminationStrategy: PID 31028 died... 18:00:01.665717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31028): Terminated: ok {rc=0} 18:00:01.676370 --- ParallelTerminationStrategy: PID 31029 died... 18:00:01.732838 run iperf3-srv_10.42.42.10(pid=31029): Terminated {rc=256} 18:00:01.743489 --- ParallelTerminationStrategy: PID 31032 died... 18:00:01.800060 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31032): Terminated: ok {rc=0} 18:00:01.810672 --- ParallelTerminationStrategy: PID 31035 died... 18:00:01.867932 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31035): Terminated: ok {rc=0} 18:00:01.878603 --- ParallelTerminationStrategy: PID 31038 died... 18:00:01.935117 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31038): Terminated: ok {rc=0} 18:00:02.033890 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31036): Process ended prematurely: osmo-stp_10.42.42.5(pid=31036) [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31036)]