Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=30645): Process ended prematurely: osmo-stp_10.42.42.5(pid=30645) [trial-2362↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30645)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 17:54:10.513540 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:54:10.526020 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 17:54:10.673323 tst iperf3m4.py: using LAC 22707 17:54:10.802225 tst iperf3m4.py: using RAC 12 17:54:10.929297 tst iperf3m4.py: using CellId 22707 17:54:11.055663 tst iperf3m4.py: using BVCI 22708 17:54:11.080570 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:54:11.092343 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:54:11.103816 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:54:11.115550 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:54:11.127204 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:54:11.138744 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:54:11.150414 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:54:11.161854 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:54:11.173664 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:54:11.291497 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:54:11.411182 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:54:11.530275 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:54:11.810830 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 17:54:11.938412 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:54:12.256496 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30631): Launched 17:54:12.521416 run iperf3-srv_10.42.42.10(pid=30632): Launched 17:54:12.707466 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 17:54:12.834277 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:54:13.153108 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30633): Launched 17:54:13.415645 run iperf3-srv_10.42.42.10(pid=30634): Launched 17:54:13.601583 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 17:54:13.728109 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:54:14.044807 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30635): Launched 17:54:14.307702 run iperf3-srv_10.42.42.10(pid=30636): Launched 17:54:14.493447 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 17:54:14.619923 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:54:14.936253 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30637): Launched 17:54:15.200614 run iperf3-srv_10.42.42.10(pid=30638): Launched 17:54:15.386340 tst iperf3m4.py:8: start network... 17:54:15.513012 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:54:16.048879 run create_hlr_db(pid=30639): Launched 17:54:16.243338 bus /gobi_6: Setting Powered False 17:54:17.293620 run create_hlr_db(pid=30639): Terminated: ok {rc=0} 17:54:17.704438 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30641): Launched 17:54:18.010579 run osmo-hlr_10.42.42.2(pid=30642): Launched 17:54:18.127526 run osmo-stp_10.42.42.5: Starting osmo-stp 17:54:18.660057 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30644): Launched 17:54:18.967631 run osmo-stp_10.42.42.5(pid=30645): Launched 17:54:19.079030 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:54:19.612021 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30647): Launched 17:54:19.720636 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:54:19.987081 run patchelf(pid=30648): Launched 17:54:20.166111 run osmo-stp_10.42.42.5(pid=30645): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30645)] 17:54:20.297076 run osmo-stp_10.42.42.5(pid=30645): stdout: | (launched: 2022-12-09_17:54:18.814647) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:54:20.428616 run osmo-stp_10.42.42.5(pid=30645): stderr: | �[0;m�[38;5;43m20221209175418986 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209175418987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209175418987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209175418987 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209175418988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209175418988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209175418988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:54:20.554779 run osmo-stp_10.42.42.5(pid=30645): stdout: | (launched: 2022-12-09_17:54:18.814647) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:54:20.680397 run osmo-stp_10.42.42.5(pid=30645): stderr: | �[0;m�[38;5;43m20221209175418986 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209175418987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209175418987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209175418987 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209175418988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209175418988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209175418988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:54:20.826239 run patchelf(pid=30648): Terminating (SIGINT) 17:54:20.997850 run patchelf(pid=30648): Terminated: ok {rc=0} 17:54:21.029626 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=30645): Process ended prematurely: osmo-stp_10.42.42.5(pid=30645) [trial-2362↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30645)] [trial-2362↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 17:54:21.039061 tst iperf3m4.py:8: Test FAILED (10.6 sec) 17:54:21.100638 run osmo-hlr_10.42.42.2(pid=30642): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30642)] 17:54:21.150604 run osmo-hlr_10.42.42.2(pid=30642): stdout: | (launched: 2022-12-09_17:54:17.859610) 17:54:21.200806 run osmo-hlr_10.42.42.2(pid=30642): stderr: | �[0;m�[1;31m20221209175418034 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209175418035 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209175418035 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209175418035 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209175418035 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209175418035 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209175418047 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209175418057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209175418058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209175418058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:54:21.243643 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30631): Terminating (SIGTERM) 17:54:21.283570 run iperf3-srv_10.42.42.10(pid=30632): Terminating (SIGTERM) 17:54:21.323989 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30633): Terminating (SIGTERM) 17:54:21.363737 run iperf3-srv_10.42.42.10(pid=30634): Terminating (SIGTERM) 17:54:21.403717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30635): Terminating (SIGTERM) 17:54:21.443670 run iperf3-srv_10.42.42.10(pid=30636): Terminating (SIGTERM) 17:54:21.483608 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30637): Terminating (SIGTERM) 17:54:21.523545 run iperf3-srv_10.42.42.10(pid=30638): Terminating (SIGTERM) 17:54:21.563785 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30641): Terminating (SIGTERM) 17:54:21.603554 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30644): Terminating (SIGTERM) 17:54:21.643790 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30647): Terminating (SIGTERM) 17:54:21.653112 --- ParallelTerminationStrategy: PID 30631 died... 17:54:21.706717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30631): Terminated: ok {rc=0} 17:54:21.716179 --- ParallelTerminationStrategy: PID 30632 died... 17:54:21.770660 run iperf3-srv_10.42.42.10(pid=30632): Terminated {rc=256} 17:54:21.780424 --- ParallelTerminationStrategy: PID 30633 died... 17:54:21.834041 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30633): Terminated: ok {rc=0} 17:54:21.843670 --- ParallelTerminationStrategy: PID 30634 died... 17:54:21.897204 run iperf3-srv_10.42.42.10(pid=30634): Terminated {rc=256} 17:54:21.906770 --- ParallelTerminationStrategy: PID 30635 died... 17:54:21.960054 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30635): Terminated: ok {rc=0} 17:54:21.969842 --- ParallelTerminationStrategy: PID 30636 died... 17:54:22.022919 run iperf3-srv_10.42.42.10(pid=30636): Terminated {rc=256} 17:54:22.032804 --- ParallelTerminationStrategy: PID 30637 died... 17:54:22.086162 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30637): Terminated: ok {rc=0} 17:54:22.095960 --- ParallelTerminationStrategy: PID 30638 died... 17:54:22.149094 run iperf3-srv_10.42.42.10(pid=30638): Terminated {rc=256} 17:54:22.158916 --- ParallelTerminationStrategy: PID 30641 died... 17:54:22.212463 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30641): Terminated: ok {rc=0} 17:54:22.222065 --- ParallelTerminationStrategy: PID 30644 died... 17:54:22.275359 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30644): Terminated: ok {rc=0} 17:54:22.285288 --- ParallelTerminationStrategy: PID 30647 died... 17:54:22.338663 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30647): Terminated: ok {rc=0} 17:54:22.422986 bus /gobi_4: Setting Powered False 17:54:23.524527 bus /gobi_4: Setting Powered False 17:54:24.632478 bus /gobi_1: Setting Powered False 17:54:25.740265 bus /gobi_1: Setting Powered False 17:54:26.851847 bus /gobi_0: Setting Powered False 17:54:27.954969 bus /gobi_0: Setting Powered False 17:54:29.066066 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30645): Process ended prematurely: osmo-stp_10.42.42.5(pid=30645) [trial-2362↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30645)]