Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=32034): Process ended prematurely: osmo-stp_10.42.42.5(pid=32034) [trial-2362↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32034)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 18:09:49.487819 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:09:49.499689 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:09:49.659426 tst iperf3.py: using LAC 22790 18:09:49.779648 tst iperf3.py: using RAC 95 18:09:49.896063 tst iperf3.py: using CellId 22790 18:09:50.013849 tst iperf3.py: using BVCI 22791 18:09:50.036875 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:09:50.048096 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:09:50.059158 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:09:50.070210 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:09:50.081190 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:09:50.092022 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:09:50.103104 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:09:50.113819 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:09:50.124778 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:09:50.413456 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:09:50.545241 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:09:50.881380 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32026): Launched 18:09:51.154222 run iperf3-srv_10.42.42.10(pid=32027): Launched 18:09:51.348554 tst iperf3.py:8: start network... 18:09:51.480868 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:09:51.988275 run create_hlr_db(pid=32028): Launched 18:09:52.172210 bus /gobi_6: Setting Powered False 18:09:53.193077 run create_hlr_db(pid=32028): Terminated: ok {rc=0} 18:09:53.594251 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32030): Launched 18:09:53.891750 run osmo-hlr_10.42.42.2(pid=32031): Launched 18:09:54.003381 run osmo-stp_10.42.42.5: Starting osmo-stp 18:09:54.532284 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32033): Launched 18:09:54.857540 run osmo-stp_10.42.42.5(pid=32034): Launched 18:09:54.972685 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:09:55.526322 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32036): Launched 18:09:55.639038 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:09:55.914850 run patchelf(pid=32037): Launched 18:09:56.101047 run osmo-stp_10.42.42.5(pid=32034): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32034)] 18:09:56.236497 run osmo-stp_10.42.42.5(pid=32034): stdout: | (launched: 2022-12-09_18:09:54.699927) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:09:56.372558 run osmo-stp_10.42.42.5(pid=32034): stderr: | �[0;m�[38;5;43m20221209180954890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209180954890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209180954890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209180954890 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209180954891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209180954891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209180954891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:09:56.503535 run osmo-stp_10.42.42.5(pid=32034): stdout: | (launched: 2022-12-09_18:09:54.699927) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:09:56.633646 run osmo-stp_10.42.42.5(pid=32034): stderr: | �[0;m�[38;5;43m20221209180954890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209180954890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209180954890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209180954890 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209180954891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209180954891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209180954891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:09:56.784322 run patchelf(pid=32037): Terminating (SIGINT) 18:09:56.962436 run patchelf(pid=32037): Terminated: ok {rc=0} 18:09:56.995362 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=32034): Process ended prematurely: osmo-stp_10.42.42.5(pid=32034) [trial-2362↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32034)] [trial-2362↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8] 18:09:57.005684 tst iperf3.py:8: Test FAILED (7.5 sec) 18:09:57.068109 run osmo-hlr_10.42.42.2(pid=32031): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32031)] 18:09:57.119181 run osmo-hlr_10.42.42.2(pid=32031): stdout: | (launched: 2022-12-09_18:09:53.744377) 18:09:57.170792 run osmo-hlr_10.42.42.2(pid=32031): stderr: | �[0;m�[1;31m20221209180953921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209180953921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209180953921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209180953921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209180953921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209180953921 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209180953933 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209180953943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209180953943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209180953943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:09:57.214684 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32026): Terminating (SIGTERM) 18:09:57.256522 run iperf3-srv_10.42.42.10(pid=32027): Terminating (SIGTERM) 18:09:57.298182 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32030): Terminating (SIGTERM) 18:09:57.339877 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32033): Terminating (SIGTERM) 18:09:57.381646 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32036): Terminating (SIGTERM) 18:09:57.391269 --- ParallelTerminationStrategy: PID 32026 died... 18:09:57.446838 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32026): Terminated: ok {rc=0} 18:09:57.456815 --- ParallelTerminationStrategy: PID 32027 died... 18:09:57.512755 run iperf3-srv_10.42.42.10(pid=32027): Terminated {rc=256} 18:09:57.522740 --- ParallelTerminationStrategy: PID 32030 died... 18:09:57.578261 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32030): Terminated: ok {rc=0} 18:09:57.588271 --- ParallelTerminationStrategy: PID 32033 died... 18:09:57.643706 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32033): Terminated: ok {rc=0} 18:09:57.653783 --- ParallelTerminationStrategy: PID 32036 died... 18:09:57.709125 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32036): Terminated: ok {rc=0} 18:09:57.795585 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32034): Process ended prematurely: osmo-stp_10.42.42.5(pid=32034) [trial-2362↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32034)]