Failed
gprs:nanobts+band-1900+mod-bts0-dynts-ipa.ping.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8101): Process ended prematurely: osmo-stp_10.42.42.5(pid=8101) [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8101)]
Standard Output
---------------------------------------------- trial-2363 gprs:nanobts+band-1900+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 19:43:26.321145 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:43:26.332746 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:43:26.480827 tst ping.py: using LAC 23286 19:43:26.600777 tst ping.py: using RAC 81 19:43:26.721320 tst ping.py: using CellId 23286 19:43:26.839213 tst ping.py: using BVCI 23287 19:43:26.862364 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:43:26.873657 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:43:26.884370 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:43:26.895725 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:43:26.906685 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:43:26.917681 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:43:26.928592 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:43:26.939589 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:43:27.217062 tst ping.py:19: start network... 19:43:27.343622 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:43:27.829279 run create_hlr_db(pid=8095): Launched 19:43:28.003989 bus /gobi_6: Setting Powered False 19:43:29.024410 run create_hlr_db(pid=8095): Terminated: ok {rc=0} 19:43:29.457974 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8097): Launched 19:43:29.785037 run osmo-hlr_10.42.42.2(pid=8098): Launched 19:43:29.905907 run osmo-stp_10.42.42.5: Starting osmo-stp 19:43:30.479293 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8100): Launched 19:43:30.803610 run osmo-stp_10.42.42.5(pid=8101): Launched 19:43:31.039908 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:43:31.596047 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8103): Launched 19:43:31.714373 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:43:32.000534 run patchelf(pid=8104): Launched 19:43:32.186714 run osmo-stp_10.42.42.5(pid=8101): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8101)] 19:43:32.326710 run osmo-stp_10.42.42.5(pid=8101): stdout: | (launched: 2022-12-09_19:43:30.644480) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:43:32.464633 run osmo-stp_10.42.42.5(pid=8101): stderr: | �[0;m�[38;5;43m20221209194330835 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209194330835 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209194330835 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209194330836 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209194330838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209194330838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209194330838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:43:32.598354 run osmo-stp_10.42.42.5(pid=8101): stdout: | (launched: 2022-12-09_19:43:30.644480) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:43:32.731343 run osmo-stp_10.42.42.5(pid=8101): stderr: | �[0;m�[38;5;43m20221209194330835 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209194330835 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209194330835 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209194330836 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209194330838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209194330838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209194330838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:43:32.885059 run patchelf(pid=8104): Terminating (SIGINT) 19:43:33.065707 run patchelf(pid=8104): Terminated: ok {rc=0} 19:43:33.099076 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8101): Process ended prematurely: osmo-stp_10.42.42.5(pid=8101) [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8101)] [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22] 19:43:33.108607 tst ping.py:22: Test FAILED (6.8 sec) 19:43:33.171932 run osmo-hlr_10.42.42.2(pid=8098): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8098)] 19:43:33.223612 run osmo-hlr_10.42.42.2(pid=8098): stdout: | (launched: 2022-12-09_19:43:29.623569) 19:43:33.275410 run osmo-hlr_10.42.42.2(pid=8098): stderr: | �[0;m�[1;31m20221209194329826 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209194329826 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209194329826 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209194329826 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209194329826 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209194329826 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209194329838 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209194329847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209194329847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209194329847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:43:33.319593 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8097): Terminating (SIGTERM) 19:43:33.361696 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8100): Terminating (SIGTERM) 19:43:33.403221 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8103): Terminating (SIGTERM) 19:43:33.413278 --- ParallelTerminationStrategy: PID 8097 died... 19:43:33.469482 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8097): Terminated: ok {rc=0} 19:43:33.479598 --- ParallelTerminationStrategy: PID 8100 died... 19:43:33.535405 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8100): Terminated: ok {rc=0} 19:43:33.545788 --- ParallelTerminationStrategy: PID 8103 died... 19:43:33.601794 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8103): Terminated: ok {rc=0} 19:43:33.687115 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8101): Process ended prematurely: osmo-stp_10.42.42.5(pid=8101) [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8101)]