Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-1900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-egprs)

Failing for the past 225 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8006): Process ended prematurely: osmo-stp_10.42.42.5(pid=8006) [trial-2363↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8006)]

Standard Output

----------------------------------------------
trial-2363 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py
----------------------------------------------
19:41:56.411826 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:41:56.424060 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
19:41:56.564847 tst                        iperf3.py: using LAC 23279
19:41:56.693105 tst                        iperf3.py: using RAC 74
19:41:56.821438 tst                        iperf3.py: using CellId 23279
19:41:56.948766 tst                        iperf3.py: using BVCI 23280
19:41:56.973876 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:41:56.985365 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:41:56.996759 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:41:57.008226 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:41:57.019533 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:41:57.030804 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:41:57.042368 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:41:57.053931 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:41:57.065877 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
19:41:57.364197 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
19:41:57.502691 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:41:57.844631 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7988): Launched
19:41:58.127916 run iperf3-srv_10.42.42.10(pid=7989): Launched
19:41:58.330316 tst                      iperf3.py:8: start network...
19:41:58.468271 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:41:58.987433 run          create_hlr_db(pid=7990): Launched
19:41:59.178716 bus                          /gobi_6: Setting Powered False
19:42:00.199125 run          create_hlr_db(pid=7990): Terminated: ok {rc=0}
19:42:00.612642 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7992): Launched
19:42:01.149853 run    osmo-hlr_10.42.42.2(pid=7993): Launched
19:42:01.272350 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:42:01.876062 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8005): Launched
19:42:02.213425 run    osmo-stp_10.42.42.5(pid=8006): Launched
19:42:02.352385 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:42:02.892166 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8008): Launched
19:42:03.002080 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:42:03.270317 run               patchelf(pid=8009): Launched
19:42:03.450195 run    osmo-stp_10.42.42.5(pid=8006): ERR: Terminated: ERROR {rc=1}  [trial-2363↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8006)]
19:42:03.581509 run    osmo-stp_10.42.42.5(pid=8006): stdout: 
| (launched: 2022-12-09_19:42:02.048420)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:42:03.713346 run    osmo-stp_10.42.42.5(pid=8006): stderr: 
| �[0;m�[38;5;43m20221209194202345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209194202345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209194202345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209194202346 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209194202346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209194202346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209194202346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:42:03.840477 run    osmo-stp_10.42.42.5(pid=8006): stdout: 
| (launched: 2022-12-09_19:42:02.048420)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:42:03.967142 run    osmo-stp_10.42.42.5(pid=8006): stderr: 
| �[0;m�[38;5;43m20221209194202345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209194202345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209194202345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209194202346 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209194202346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209194202346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209194202346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:42:04.113848 run               patchelf(pid=8009): Terminating (SIGINT)
19:42:04.285684 run               patchelf(pid=8009): Terminated: ok {rc=0}
19:42:04.317133 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8006): Process ended prematurely: osmo-stp_10.42.42.5(pid=8006) [trial-2363↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8006)]  [trial-2363↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8]
19:42:04.326505 tst                      iperf3.py:8: Test FAILED (8.0 sec)
19:42:04.385955 run    osmo-hlr_10.42.42.2(pid=7993): ERR: Terminated: ERROR {rc=237}  [trial-2363↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7993)]
19:42:04.433929 run    osmo-hlr_10.42.42.2(pid=7993): stdout: 
| (launched: 2022-12-09_19:42:00.769096) 
19:42:04.482562 run    osmo-hlr_10.42.42.2(pid=7993): stderr: 
| �[0;m�[1;31m20221209194200959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209194200959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209194200959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209194200959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209194200959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209194200959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209194200973 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209194200981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209194200982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209194200982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:42:04.523926 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7988): Terminating (SIGTERM)
19:42:04.562763 run iperf3-srv_10.42.42.10(pid=7989): Terminating (SIGTERM)
19:42:04.604070 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7992): Terminating (SIGTERM)
19:42:04.643095 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8005): Terminating (SIGTERM)
19:42:04.682135 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8008): Terminating (SIGTERM)
19:42:04.691219 ---      ParallelTerminationStrategy: PID 7988 died...
19:42:04.743287 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7988): Terminated: ok {rc=0}
19:42:04.752646 ---      ParallelTerminationStrategy: PID 7989 died...
19:42:04.805034 run iperf3-srv_10.42.42.10(pid=7989): Terminated {rc=256}
19:42:04.814382 ---      ParallelTerminationStrategy: PID 7992 died...
19:42:04.866852 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7992): Terminated: ok {rc=0}
19:42:04.876334 ---      ParallelTerminationStrategy: PID 8005 died...
19:42:04.928084 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8005): Terminated: ok {rc=0}
19:42:04.937833 ---      ParallelTerminationStrategy: PID 8008 died...
19:42:04.990054 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8008): Terminated: ok {rc=0}
19:42:05.077904 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8006): Process ended prematurely: osmo-stp_10.42.42.5(pid=8006) [trial-2363↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8006)]