Failed
gprs:oc2g+mod-bts0-dynts-ipa.iperf3.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=3253): Process ended prematurely: osmo-stp_10.42.42.5(pid=3253) [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3253)]
Standard Output
---------------------------------------------- trial-2363 gprs:oc2g+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 18:53:06.335705 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:53:06.348375 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:53:06.508151 tst iperf3.py: using LAC 23020 18:53:06.638268 tst iperf3.py: using RAC 70 18:53:06.768467 tst iperf3.py: using CellId 23020 18:53:06.894919 tst iperf3.py: using BVCI 23021 18:53:06.920313 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:53:06.932285 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:53:06.944088 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:53:06.957029 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:53:06.970744 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:53:06.984426 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:53:06.996358 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:53:07.009214 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:53:07.023505 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:53:07.323565 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:53:07.462574 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:53:07.817872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3245): Launched 18:53:08.116208 run iperf3-srv_10.42.42.10(pid=3246): Launched 18:53:08.319789 tst iperf3.py:8: start network... 18:53:08.460036 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:53:09.023144 run create_hlr_db(pid=3247): Launched 18:53:09.216246 bus /gobi_6: Setting Powered False 18:53:10.240240 run create_hlr_db(pid=3247): Terminated: ok {rc=0} 18:53:10.695115 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3249): Launched 18:53:11.130030 run osmo-hlr_10.42.42.2(pid=3250): Launched 18:53:11.377717 run osmo-stp_10.42.42.5: Starting osmo-stp 18:53:11.976447 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3252): Launched 18:53:12.412379 run osmo-stp_10.42.42.5(pid=3253): Launched 18:53:12.632371 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:53:13.230105 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3255): Launched 18:53:13.349997 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:53:13.660057 run patchelf(pid=3256): Launched 18:53:13.855731 run osmo-stp_10.42.42.5(pid=3253): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3253)] 18:53:13.999770 run osmo-stp_10.42.42.5(pid=3253): stdout: | (launched: 2022-12-09_18:53:12.146735) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:53:14.143609 run osmo-stp_10.42.42.5(pid=3253): stderr: | �[0;m�[38;5;43m20221209185312449 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185312449 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185312450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185312450 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185312451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185312451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185312451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:53:14.283602 run osmo-stp_10.42.42.5(pid=3253): stdout: | (launched: 2022-12-09_18:53:12.146735) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:53:14.422096 run osmo-stp_10.42.42.5(pid=3253): stderr: | �[0;m�[38;5;43m20221209185312449 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185312449 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185312450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185312450 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185312451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185312451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185312451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:53:14.582812 run patchelf(pid=3256): Terminating (SIGINT) 18:53:14.769245 run patchelf(pid=3256): Terminated: ok {rc=0} 18:53:14.804925 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3253): Process ended prematurely: osmo-stp_10.42.42.5(pid=3253) [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3253)] [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8] 18:53:14.816035 tst iperf3.py:8: Test FAILED (8.5 sec) 18:53:14.883167 run osmo-hlr_10.42.42.2(pid=3250): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3250)] 18:53:14.936385 run osmo-hlr_10.42.42.2(pid=3250): stdout: | (launched: 2022-12-09_18:53:10.864714) 18:53:14.992346 run osmo-hlr_10.42.42.2(pid=3250): stderr: | �[0;m�[1;31m20221209185311172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209185311172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209185311172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209185311172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209185311172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209185311172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209185311191 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:oc2g+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209185311204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209185311204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209185311205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:53:15.037284 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3245): Terminating (SIGTERM) 18:53:15.084441 run iperf3-srv_10.42.42.10(pid=3246): Terminating (SIGTERM) 18:53:15.130093 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3249): Terminating (SIGTERM) 18:53:15.175218 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3252): Terminating (SIGTERM) 18:53:15.221331 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3255): Terminating (SIGTERM) 18:53:15.233600 --- ParallelTerminationStrategy: PID 3245 died... 18:53:15.294239 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3245): Terminated: ok {rc=0} 18:53:15.305249 --- ParallelTerminationStrategy: PID 3246 died... 18:53:15.364009 run iperf3-srv_10.42.42.10(pid=3246): Terminated {rc=256} 18:53:15.374774 --- ParallelTerminationStrategy: PID 3249 died... 18:53:15.434309 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3249): Terminated: ok {rc=0} 18:53:15.445313 --- ParallelTerminationStrategy: PID 3252 died... 18:53:15.504129 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3252): Terminated: ok {rc=0} 18:53:15.514974 --- ParallelTerminationStrategy: PID 3255 died... 18:53:15.574326 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3255): Terminated: ok {rc=0} 18:53:15.665095 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3253): Process ended prematurely: osmo-stp_10.42.42.5(pid=3253) [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3253)]