Failed
gprs:oc2g+mod-bts0-dynts-osmo.iperf3.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3322): Process ended prematurely: osmo-stp_10.42.42.5(pid=3322) [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3322)]
Standard Output
---------------------------------------------- trial-2363 gprs:oc2g+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 18:54:06.983111 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:06.994375 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:54:07.139753 tst iperf3.py: using LAC 23025 18:54:07.258318 tst iperf3.py: using RAC 75 18:54:07.374782 tst iperf3.py: using CellId 23025 18:54:07.490842 tst iperf3.py: using BVCI 23026 18:54:07.513727 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:07.524305 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:07.534729 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:07.545163 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:07.555520 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:07.565926 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:07.576344 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:07.586699 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:07.597239 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:54:07.888006 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:54:08.022681 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:54:08.353271 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3314): Launched 18:54:08.626625 run iperf3-srv_10.42.42.10(pid=3315): Launched 18:54:08.823781 tst iperf3.py:8: start network... 18:54:08.958335 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:54:09.460582 run create_hlr_db(pid=3316): Launched 18:54:09.645607 bus /gobi_6: Setting Powered False 18:54:10.666581 run create_hlr_db(pid=3316): Terminated: ok {rc=0} 18:54:11.090539 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3318): Launched 18:54:11.410986 run osmo-hlr_10.42.42.2(pid=3319): Launched 18:54:11.530471 run osmo-stp_10.42.42.5: Starting osmo-stp 18:54:12.086731 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3321): Launched 18:54:12.404941 run osmo-stp_10.42.42.5(pid=3322): Launched 18:54:12.520767 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:54:13.074711 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3324): Launched 18:54:13.189701 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:54:13.466823 run patchelf(pid=3325): Launched 18:54:13.652895 run osmo-stp_10.42.42.5(pid=3322): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3322)] 18:54:13.789663 run osmo-stp_10.42.42.5(pid=3322): stdout: | (launched: 2022-12-09_18:54:12.249494) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:13.926672 run osmo-stp_10.42.42.5(pid=3322): stderr: | �[0;m�[38;5;43m20221209185412438 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185412439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185412439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185412439 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185412440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185412440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185412440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:14.058830 run osmo-stp_10.42.42.5(pid=3322): stdout: | (launched: 2022-12-09_18:54:12.249494) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:14.190343 run osmo-stp_10.42.42.5(pid=3322): stderr: | �[0;m�[38;5;43m20221209185412438 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185412439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185412439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185412439 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185412440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185412440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185412440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:14.343192 run patchelf(pid=3325): Terminating (SIGINT) 18:54:14.522750 run patchelf(pid=3325): Terminated: ok {rc=0} 18:54:14.555623 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3322): Process ended prematurely: osmo-stp_10.42.42.5(pid=3322) [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3322)] [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8] 18:54:14.565580 tst iperf3.py:8: Test FAILED (7.6 sec) 18:54:14.627522 run osmo-hlr_10.42.42.2(pid=3319): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3319)] 18:54:14.678037 run osmo-hlr_10.42.42.2(pid=3319): stdout: | (launched: 2022-12-09_18:54:11.254693) 18:54:14.728930 run osmo-hlr_10.42.42.2(pid=3319): stderr: | �[0;m�[1;31m20221209185411449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209185411449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209185411449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209185411449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209185411449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209185411449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209185411461 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:oc2g+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209185411470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209185411470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209185411470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:54:14.772523 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3314): Terminating (SIGTERM) 18:54:14.813672 run iperf3-srv_10.42.42.10(pid=3315): Terminating (SIGTERM) 18:54:14.854768 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3318): Terminating (SIGTERM) 18:54:14.895917 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3321): Terminating (SIGTERM) 18:54:14.937476 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3324): Terminating (SIGTERM) 18:54:14.946858 --- ParallelTerminationStrategy: PID 3314 died... 18:54:15.001692 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3314): Terminated: ok {rc=0} 18:54:15.011492 --- ParallelTerminationStrategy: PID 3315 died... 18:54:15.066197 run iperf3-srv_10.42.42.10(pid=3315): Terminated {rc=256} 18:54:15.076242 --- ParallelTerminationStrategy: PID 3318 died... 18:54:15.131011 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3318): Terminated: ok {rc=0} 18:54:15.141094 --- ParallelTerminationStrategy: PID 3321 died... 18:54:15.195729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3321): Terminated: ok {rc=0} 18:54:15.205817 --- ParallelTerminationStrategy: PID 3324 died... 18:54:15.260348 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3324): Terminated: ok {rc=0} 18:54:15.345146 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3322): Process ended prematurely: osmo-stp_10.42.42.5(pid=3322) [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3322)]