Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3350): Process ended prematurely: osmo-stp_10.42.42.5(pid=3350) [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3350)]
Standard Output
---------------------------------------------- trial-2363 gprs:oc2g+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 18:54:36.195048 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:36.206966 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:54:36.358344 tst ping.py: using LAC 23027 18:54:36.482109 tst ping.py: using RAC 77 18:54:36.607792 tst ping.py: using CellId 23027 18:54:36.736784 tst ping.py: using BVCI 23028 18:54:36.761255 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:36.772489 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:36.783560 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:36.794857 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:36.806127 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:36.817284 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:36.828554 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:36.839920 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:54:37.128536 tst ping.py:19: start network... 18:54:37.262290 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:54:37.763283 run create_hlr_db(pid=3344): Launched 18:54:37.948599 bus /gobi_6: Setting Powered False 18:54:38.968314 run create_hlr_db(pid=3344): Terminated: ok {rc=0} 18:54:39.367135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3346): Launched 18:54:39.665547 run osmo-hlr_10.42.42.2(pid=3347): Launched 18:54:39.773937 run osmo-stp_10.42.42.5: Starting osmo-stp 18:54:40.292563 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3349): Launched 18:54:40.591483 run osmo-stp_10.42.42.5(pid=3350): Launched 18:54:40.699371 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:54:41.217458 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3352): Launched 18:54:41.322929 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:54:41.582903 run patchelf(pid=3353): Launched 18:54:41.756535 run osmo-stp_10.42.42.5(pid=3350): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3350)] 18:54:41.883362 run osmo-stp_10.42.42.5(pid=3350): stdout: | (launched: 2022-12-09_18:54:40.444121) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:42.010681 run osmo-stp_10.42.42.5(pid=3350): stderr: | �[0;m�[38;5;43m20221209185440612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185440613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185440613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185440613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185440614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185440614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185440614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:42.133573 run osmo-stp_10.42.42.5(pid=3350): stdout: | (launched: 2022-12-09_18:54:40.444121) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:42.255232 run osmo-stp_10.42.42.5(pid=3350): stderr: | �[0;m�[38;5;43m20221209185440612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185440613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185440613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185440613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185440614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185440614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185440614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:42.397417 run patchelf(pid=3353): Terminating (SIGINT) 18:54:42.564048 run patchelf(pid=3353): Terminated: ok {rc=0} 18:54:42.594411 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=3350): Process ended prematurely: osmo-stp_10.42.42.5(pid=3350) [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3350)] [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22] 18:54:42.603065 tst ping.py:22: Test FAILED (6.4 sec) 18:54:42.662332 run osmo-hlr_10.42.42.2(pid=3347): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3347)] 18:54:42.710770 run osmo-hlr_10.42.42.2(pid=3347): stdout: | (launched: 2022-12-09_18:54:39.519023) 18:54:42.759686 run osmo-hlr_10.42.42.2(pid=3347): stderr: | �[0;m�[1;31m20221209185439693 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209185439693 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209185439693 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209185439693 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209185439693 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209185439693 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209185439736 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:oc2g+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209185439746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209185439746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209185439746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:54:42.801521 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3346): Terminating (SIGTERM) 18:54:42.840882 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3349): Terminating (SIGTERM) 18:54:42.880165 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3352): Terminating (SIGTERM) 18:54:42.889337 --- ParallelTerminationStrategy: PID 3346 died... 18:54:42.941986 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3346): Terminated: ok {rc=0} 18:54:42.951409 --- ParallelTerminationStrategy: PID 3349 died... 18:54:43.003756 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3349): Terminated: ok {rc=0} 18:54:43.013259 --- ParallelTerminationStrategy: PID 3352 died... 18:54:43.065522 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3352): Terminated: ok {rc=0} 18:54:43.154194 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3350): Process ended prematurely: osmo-stp_10.42.42.5(pid=3350) [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3350)]