Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=2536): Process ended prematurely: osmo-stp_10.42.42.5(pid=2536) [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2536)]
Standard Output
---------------------------------------------- trial-2363 gprs:sysmo+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 18:46:47.721997 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:47.732915 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:46:47.875760 tst ping.py: using LAC 22985 18:46:47.990830 tst ping.py: using RAC 35 18:46:48.108094 tst ping.py: using CellId 22985 18:46:48.225867 tst ping.py: using BVCI 22986 18:46:48.248246 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:48.259000 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:48.269464 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:48.279844 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:48.290181 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:48.300596 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:48.311130 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:48.321522 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:46:48.591561 tst ping.py:19: start network... 18:46:48.714551 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:46:49.186019 run create_hlr_db(pid=2530): Launched 18:46:49.356738 bus /gobi_6: Setting Powered False 18:46:50.377258 run create_hlr_db(pid=2530): Terminated: ok {rc=0} 18:46:50.769828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2532): Launched 18:46:51.064176 run osmo-hlr_10.42.42.2(pid=2533): Launched 18:46:51.180656 run osmo-stp_10.42.42.5: Starting osmo-stp 18:46:51.720746 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2535): Launched 18:46:52.013972 run osmo-stp_10.42.42.5(pid=2536): Launched 18:46:52.119602 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:46:52.629821 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2538): Launched 18:46:52.733497 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:46:52.988579 run patchelf(pid=2539): Launched 18:46:53.159921 run osmo-stp_10.42.42.5(pid=2536): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2536)] 18:46:53.284930 run osmo-stp_10.42.42.5(pid=2536): stdout: | (launched: 2022-12-09_18:46:51.869782) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:46:53.410706 run osmo-stp_10.42.42.5(pid=2536): stderr: | �[0;m�[38;5;43m20221209184652040 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184652040 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184652041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184652041 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184652042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184652042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184652042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:46:53.531819 run osmo-stp_10.42.42.5(pid=2536): stdout: | (launched: 2022-12-09_18:46:51.869782) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:46:53.651796 run osmo-stp_10.42.42.5(pid=2536): stderr: | �[0;m�[38;5;43m20221209184652040 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184652040 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184652041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184652041 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184652042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184652042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184652042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:46:53.792168 run patchelf(pid=2539): Terminating (SIGINT) 18:46:53.956408 run patchelf(pid=2539): Terminated: ok {rc=0} 18:46:53.986340 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=2536): Process ended prematurely: osmo-stp_10.42.42.5(pid=2536) [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2536)] [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22] 18:46:53.994938 tst ping.py:22: Test FAILED (6.3 sec) 18:46:54.053912 run osmo-hlr_10.42.42.2(pid=2533): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2533)] 18:46:54.101946 run osmo-hlr_10.42.42.2(pid=2533): stdout: | (launched: 2022-12-09_18:46:50.919638) 18:46:54.150562 run osmo-hlr_10.42.42.2(pid=2533): stderr: | �[0;m�[1;31m20221209184651094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209184651094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209184651094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209184651094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209184651094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209184651094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209184651106 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:sysmo+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209184651115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209184651115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209184651115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:46:54.191762 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2532): Terminating (SIGTERM) 18:46:54.230531 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2535): Terminating (SIGTERM) 18:46:54.269566 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2538): Terminating (SIGTERM) 18:46:54.278573 --- ParallelTerminationStrategy: PID 2532 died... 18:46:54.330806 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2532): Terminated: ok {rc=0} 18:46:54.340146 --- ParallelTerminationStrategy: PID 2535 died... 18:46:54.392224 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2535): Terminated: ok {rc=0} 18:46:54.401722 --- ParallelTerminationStrategy: PID 2538 died... 18:46:54.453765 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2538): Terminated: ok {rc=0} 18:46:54.540744 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2536): Process ended prematurely: osmo-stp_10.42.42.5(pid=2536) [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2536)]