Failed
gprs:sysmo+mod-bts0-egprs.iperf3.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=2367): Process ended prematurely: osmo-stp_10.42.42.5(pid=2367) [trial-2363↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2367)]
Standard Output
---------------------------------------------- trial-2363 gprs:sysmo+mod-bts0-egprs iperf3.py ---------------------------------------------- 18:44:20.064502 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:20.076165 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 18:44:20.208698 tst iperf3.py: using LAC 22973 18:44:20.332338 tst iperf3.py: using RAC 23 18:44:20.456078 tst iperf3.py: using CellId 22973 18:44:20.582112 tst iperf3.py: using BVCI 22974 18:44:20.606541 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:20.617591 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:20.628495 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:20.639648 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:20.650628 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:20.661666 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:20.673339 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:20.684362 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:20.695675 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:44:20.976682 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:44:21.101954 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:44:21.411713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2359): Launched 18:44:21.668929 run iperf3-srv_10.42.42.10(pid=2360): Launched 18:44:21.851199 tst iperf3.py:8: start network... 18:44:21.975337 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:44:22.452445 run create_hlr_db(pid=2361): Launched 18:44:22.624474 bus /gobi_6: Setting Powered False 18:44:23.657634 run create_hlr_db(pid=2361): Terminated: ok {rc=0} 18:44:24.083525 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2363): Launched 18:44:24.404286 run osmo-hlr_10.42.42.2(pid=2364): Launched 18:44:24.522184 run osmo-stp_10.42.42.5: Starting osmo-stp 18:44:25.077105 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2366): Launched 18:44:25.397164 run osmo-stp_10.42.42.5(pid=2367): Launched 18:44:25.512591 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:44:26.071455 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2369): Launched 18:44:26.186420 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:44:26.466605 run patchelf(pid=2370): Launched 18:44:26.654225 run osmo-stp_10.42.42.5(pid=2367): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2367)] 18:44:26.790852 run osmo-stp_10.42.42.5(pid=2367): stdout: | (launched: 2022-12-09_18:44:25.240273) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:44:26.928739 run osmo-stp_10.42.42.5(pid=2367): stderr: | �[0;m�[38;5;43m20221209184425432 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184425432 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184425433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184425433 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184425434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184425434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184425434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:44:27.061175 run osmo-stp_10.42.42.5(pid=2367): stdout: | (launched: 2022-12-09_18:44:25.240273) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:44:27.192413 run osmo-stp_10.42.42.5(pid=2367): stderr: | �[0;m�[38;5;43m20221209184425432 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184425432 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184425433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184425433 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184425434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184425434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184425434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:44:27.345312 run patchelf(pid=2370): Terminating (SIGINT) 18:44:27.524383 run patchelf(pid=2370): Terminated: ok {rc=0} 18:44:27.557270 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=2367): Process ended prematurely: osmo-stp_10.42.42.5(pid=2367) [trial-2363↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2367)] [trial-2363↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8] 18:44:27.567150 tst iperf3.py:8: Test FAILED (7.5 sec) 18:44:27.629727 run osmo-hlr_10.42.42.2(pid=2364): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:sysmo+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2364)] 18:44:27.680251 run osmo-hlr_10.42.42.2(pid=2364): stdout: | (launched: 2022-12-09_18:44:24.246610) 18:44:27.732139 run osmo-hlr_10.42.42.2(pid=2364): stderr: | �[0;m�[1;31m20221209184424445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209184424445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209184424445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209184424445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209184424445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209184424446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209184424458 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:sysmo+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209184424468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209184424469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209184424469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:44:27.775765 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2359): Terminating (SIGTERM) 18:44:27.818041 run iperf3-srv_10.42.42.10(pid=2360): Terminating (SIGTERM) 18:44:27.859775 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2363): Terminating (SIGTERM) 18:44:27.901093 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2366): Terminating (SIGTERM) 18:44:27.942384 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2369): Terminating (SIGTERM) 18:44:27.952107 --- ParallelTerminationStrategy: PID 2359 died... 18:44:28.007539 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2359): Terminated: ok {rc=0} 18:44:28.017596 --- ParallelTerminationStrategy: PID 2360 died... 18:44:28.072445 run iperf3-srv_10.42.42.10(pid=2360): Terminated {rc=256} 18:44:28.082516 --- ParallelTerminationStrategy: PID 2363 died... 18:44:28.137472 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2363): Terminated: ok {rc=0} 18:44:28.147688 --- ParallelTerminationStrategy: PID 2366 died... 18:44:28.203099 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2366): Terminated: ok {rc=0} 18:44:28.213188 --- ParallelTerminationStrategy: PID 2369 died... 18:44:28.268414 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2369): Terminated: ok {rc=0} 18:44:28.354346 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2367): Process ended prematurely: osmo-stp_10.42.42.5(pid=2367) [trial-2363↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2367)]