Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)

Failing for the past 178 builds (Since #2186 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=3755): Process ended prematurely: osmo-stp_10.42.42.5(pid=3755) [trial-2363↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3755)]

Standard Output

----------------------------------------------
trial-2363 gprs:trx-b200 ping_idle_ping.py
----------------------------------------------
19:00:18.911792 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:18.923988 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
19:00:19.069743 tst                ping_idle_ping.py: using LAC 23059
19:00:19.197666 tst                ping_idle_ping.py: using RAC 109
19:00:19.324649 tst                ping_idle_ping.py: using CellId 23059
19:00:19.452376 tst                ping_idle_ping.py: using BVCI 23060
19:00:19.477233 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:19.488332 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:19.499270 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:19.510468 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:19.521561 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:19.532667 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:19.543884 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:19.555129 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
19:00:19.847292 tst             ping_idle_ping.py:24: start network...
19:00:19.982703 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:00:20.494860 run          create_hlr_db(pid=3749): Launched
19:00:20.683090 bus                          /gobi_6: Setting Powered False
19:00:21.704214 run          create_hlr_db(pid=3749): Terminated: ok {rc=0}
19:00:22.110678 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3751): Launched
19:00:22.415159 run    osmo-hlr_10.42.42.2(pid=3752): Launched
19:00:22.530285 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:00:23.055414 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3754): Launched
19:00:23.358377 run    osmo-stp_10.42.42.5(pid=3755): Launched
19:00:23.467823 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:00:23.995800 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3757): Launched
19:00:24.103533 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:00:24.368446 run               patchelf(pid=3758): Launched
19:00:24.545270 run    osmo-stp_10.42.42.5(pid=3755): ERR: Terminated: ERROR {rc=1}  [trial-2363↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3755)]
19:00:24.674697 run    osmo-stp_10.42.42.5(pid=3755): stdout: 
| (launched: 2022-12-09_19:00:23.209269)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:00:24.804208 run    osmo-stp_10.42.42.5(pid=3755): stderr: 
| �[0;m�[38;5;43m20221209190023380 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209190023381 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209190023381 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209190023381 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209190023382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209190023382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209190023382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:00:24.929441 run    osmo-stp_10.42.42.5(pid=3755): stdout: 
| (launched: 2022-12-09_19:00:23.209269)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:00:25.053304 run    osmo-stp_10.42.42.5(pid=3755): stderr: 
| �[0;m�[38;5;43m20221209190023380 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209190023381 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209190023381 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209190023381 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209190023382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209190023382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209190023382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:00:25.197580 run               patchelf(pid=3758): Terminating (SIGINT)
19:00:25.367433 run               patchelf(pid=3758): Terminated: ok {rc=0}
19:00:25.398309 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=3755): Process ended prematurely: osmo-stp_10.42.42.5(pid=3755) [trial-2363↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3755)]  [trial-2363↪gprs:trx-b200↪ping_idle_ping.py:27]
19:00:25.407014 tst             ping_idle_ping.py:27: Test FAILED (6.5 sec)
19:00:25.466562 run    osmo-hlr_10.42.42.2(pid=3752): ERR: Terminated: ERROR {rc=237}  [trial-2363↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3752)]
19:00:25.515318 run    osmo-hlr_10.42.42.2(pid=3752): stdout: 
| (launched: 2022-12-09_19:00:22.264726) 
19:00:25.565023 run    osmo-hlr_10.42.42.2(pid=3752): stderr: 
| �[0;m�[1;31m20221209190022442 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209190022442 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209190022442 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209190022442 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209190022442 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209190022442 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209190022455 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209190022464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209190022464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209190022464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:00:25.606927 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3751): Terminating (SIGTERM)
19:00:25.646665 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3754): Terminating (SIGTERM)
19:00:25.686527 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3757): Terminating (SIGTERM)
19:00:25.695746 ---      ParallelTerminationStrategy: PID 3751 died...
19:00:25.748873 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3751): Terminated: ok {rc=0}
19:00:25.758524 ---      ParallelTerminationStrategy: PID 3754 died...
19:00:25.811405 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3754): Terminated: ok {rc=0}
19:00:25.820930 ---      ParallelTerminationStrategy: PID 3757 died...
19:00:25.873918 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3757): Terminated: ok {rc=0}
19:00:25.964172 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3755): Process ended prematurely: osmo-stp_10.42.42.5(pid=3755) [trial-2363↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3755)]