Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7330): Process ended prematurely: osmo-stp_10.42.42.5(pid=7330) [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7330)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 19:36:14.442337 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:36:14.453879 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:36:14.603118 tst ping.py: using LAC 23248 19:36:14.719723 tst ping.py: using RAC 43 19:36:14.841207 tst ping.py: using CellId 23248 19:36:14.957586 tst ping.py: using BVCI 23249 19:36:14.980265 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:36:14.991285 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:36:15.002162 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:36:15.012814 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:36:15.023484 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:36:15.034301 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:36:15.045438 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:36:15.056325 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:36:15.328882 tst ping.py:19: start network... 19:36:15.453067 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:36:15.967568 run create_hlr_db(pid=7324): Launched 19:36:16.160335 bus /gobi_6: Setting Powered False 19:36:17.164463 run create_hlr_db(pid=7324): Terminated: ok {rc=0} 19:36:17.578135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7326): Launched 19:36:17.877790 run osmo-hlr_10.42.42.2(pid=7327): Launched 19:36:17.987505 run osmo-stp_10.42.42.5: Starting osmo-stp 19:36:18.506443 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7329): Launched 19:36:18.803530 run osmo-stp_10.42.42.5(pid=7330): Launched 19:36:18.910845 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:36:19.431008 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7332): Launched 19:36:19.536553 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:36:19.796454 run patchelf(pid=7333): Launched 19:36:19.970768 run osmo-stp_10.42.42.5(pid=7330): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7330)] 19:36:20.098173 run osmo-stp_10.42.42.5(pid=7330): stdout: | (launched: 2022-12-09_19:36:18.657590) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:36:20.225741 run osmo-stp_10.42.42.5(pid=7330): stderr: | �[0;m�[38;5;43m20221209193618828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209193618828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209193618828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209193618829 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209193618829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209193618829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209193618829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:36:20.348821 run osmo-stp_10.42.42.5(pid=7330): stdout: | (launched: 2022-12-09_19:36:18.657590) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:36:20.471124 run osmo-stp_10.42.42.5(pid=7330): stderr: | �[0;m�[38;5;43m20221209193618828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209193618828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209193618828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209193618829 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209193618829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209193618829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209193618829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:36:20.613094 run patchelf(pid=7333): Terminating (SIGINT) 19:36:20.779840 run patchelf(pid=7333): Terminated: ok {rc=0} 19:36:20.810155 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=7330): Process ended prematurely: osmo-stp_10.42.42.5(pid=7330) [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7330)] [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22] 19:36:20.818763 tst ping.py:22: Test FAILED (6.4 sec) 19:36:20.877674 run osmo-hlr_10.42.42.2(pid=7327): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7327)] 19:36:20.925736 run osmo-hlr_10.42.42.2(pid=7327): stdout: | (launched: 2022-12-09_19:36:17.730007) 19:36:20.974454 run osmo-hlr_10.42.42.2(pid=7327): stderr: | �[0;m�[1;31m20221209193617906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209193617906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209193617906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209193617907 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209193617907 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209193617907 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209193617918 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209193617927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209193617927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209193617927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:36:21.016005 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7326): Terminating (SIGTERM) 19:36:21.055381 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7329): Terminating (SIGTERM) 19:36:21.094889 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7332): Terminating (SIGTERM) 19:36:21.104045 --- ParallelTerminationStrategy: PID 7326 died... 19:36:21.157104 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7326): Terminated: ok {rc=0} 19:36:21.166592 --- ParallelTerminationStrategy: PID 7329 died... 19:36:21.218920 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7329): Terminated: ok {rc=0} 19:36:21.228798 --- ParallelTerminationStrategy: PID 7332 died... 19:36:21.281511 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7332): Terminated: ok {rc=0} 19:36:21.369919 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7330): Process ended prematurely: osmo-stp_10.42.42.5(pid=7330) [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7330)]