225gprs:trx-lms-limenet-micro9.0osmo-stp_10.42.42.5(pid=7150): Process ended prematurely: osmo-stp_10.42.42.5(pid=7150) [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7150)]2139cs_paging_gprs_active.pyfalseFAILEDTraceback (most recent call last):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
self.path)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
spec.loader.exec_module( importlib.util.module_from_spec(spec) )
File "<frozen importlib._bootstrap_external>", line 728, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module>
setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
ggsn.start()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
proc.launch_sync()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
raise e
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
self.wait()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
MainLoop.wait(self.terminated, timeout=timeout)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
self.poll(may_block=True)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
self.deferred_handling.handle_queue()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
handler(*args, **kwargs)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7150): Process ended prematurely: osmo-stp_10.42.42.5(pid=7150) [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7150)]
----------------------------------------------
trial-2363 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py
----------------------------------------------
19:33:31.500673 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:31.512555 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
19:33:31.684290 tst cs_paging_gprs_active.py: using LAC 23235
19:33:31.828555 tst cs_paging_gprs_active.py: using RAC 30
19:33:31.952880 tst cs_paging_gprs_active.py: using CellId 23235
19:33:32.072847 tst cs_paging_gprs_active.py: using BVCI 23236
19:33:32.096995 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:32.108723 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:32.120377 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:32.133013 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:32.144648 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:32.156212 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:32.167620 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:32.178914 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:32.190334 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
19:33:32.307707 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
19:33:32.589069 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
19:33:32.716698 run iperf3-srv_10.42.42.10: Starting iperf3-srv
19:33:33.032580 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7140): Launched
19:33:33.296222 run iperf3-srv_10.42.42.10(pid=7141): Launched
19:33:33.482218 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
19:33:33.609276 run iperf3-srv_10.42.42.10: Starting iperf3-srv
19:33:33.925295 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7142): Launched
19:33:34.186845 run iperf3-srv_10.42.42.10(pid=7143): Launched
19:33:34.372763 tst cs_paging_gprs_active.py:38: start network...
19:33:34.499555 run osmo-hlr_10.42.42.2: Starting osmo-hlr
19:33:34.986179 run create_hlr_db(pid=7144): Launched
19:33:35.161750 bus /sierra_2: Setting Powered False
19:33:36.183373 run create_hlr_db(pid=7144): Terminated: ok {rc=0}
19:33:36.617446 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7146): Launched
19:33:36.946147 run osmo-hlr_10.42.42.2(pid=7147): Launched
19:33:37.068005 run osmo-stp_10.42.42.5: Starting osmo-stp
19:33:37.637701 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7149): Launched
19:33:37.965680 run osmo-stp_10.42.42.5(pid=7150): Launched
19:33:38.083952 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:33:38.654200 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7152): Launched
19:33:38.771896 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:33:39.059386 run patchelf(pid=7153): Launched
19:33:39.250991 run osmo-stp_10.42.42.5(pid=7150): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7150)]
19:33:39.391491 run osmo-stp_10.42.42.5(pid=7150): stdout:
| (launched: 2022-12-09_19:33:37.804112)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
19:33:39.531716 run osmo-stp_10.42.42.5(pid=7150): stderr:
| �[0;m�[38;5;43m20221209193337994 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209193337995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209193337995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209193337995 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
19:33:39.667209 run osmo-stp_10.42.42.5(pid=7150): stdout:
| (launched: 2022-12-09_19:33:37.804112)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
19:33:39.801326 run osmo-stp_10.42.42.5(pid=7150): stderr:
| �[0;m�[38;5;43m20221209193337994 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209193337995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209193337995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209193337995 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
19:33:39.957786 run patchelf(pid=7153): Terminating (SIGINT)
19:33:40.141527 run patchelf(pid=7153): Terminated: ok {rc=0}
19:33:40.175183 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7150): Process ended prematurely: osmo-stp_10.42.42.5(pid=7150) [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7150)] [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38]
19:33:40.185101 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec)
19:33:40.248227 run osmo-hlr_10.42.42.2(pid=7147): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7147)]
19:33:40.299210 run osmo-hlr_10.42.42.2(pid=7147): stdout:
| (launched: 2022-12-09_19:33:36.784348)
19:33:40.350580 run osmo-hlr_10.42.42.2(pid=7147): stderr:
| �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209193336995 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209193337003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209193337003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209193337003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99)
19:33:40.394150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7140): Terminating (SIGTERM)
19:33:40.435503 run iperf3-srv_10.42.42.10(pid=7141): Terminating (SIGTERM)
19:33:40.476870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7142): Terminating (SIGTERM)
19:33:40.518973 run iperf3-srv_10.42.42.10(pid=7143): Terminating (SIGTERM)
19:33:40.560266 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7146): Terminating (SIGTERM)
19:33:40.601649 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7149): Terminating (SIGTERM)
19:33:40.643449 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7152): Terminating (SIGTERM)
19:33:40.653277 --- ParallelTerminationStrategy: PID 7140 died...
19:33:40.709010 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7140): Terminated: ok {rc=0}
19:33:40.719076 --- ParallelTerminationStrategy: PID 7141 died...
19:33:40.774606 run iperf3-srv_10.42.42.10(pid=7141): Terminated {rc=256}
19:33:40.784627 --- ParallelTerminationStrategy: PID 7142 died...
19:33:40.840015 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7142): Terminated: ok {rc=0}
19:33:40.850020 --- ParallelTerminationStrategy: PID 7143 died...
19:33:40.905177 run iperf3-srv_10.42.42.10(pid=7143): Terminated {rc=256}
19:33:40.915243 --- ParallelTerminationStrategy: PID 7146 died...
19:33:40.970074 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7146): Terminated: ok {rc=0}
19:33:40.980429 --- ParallelTerminationStrategy: PID 7149 died...
19:33:41.035581 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7149): Terminated: ok {rc=0}
19:33:41.046038 --- ParallelTerminationStrategy: PID 7152 died...
19:33:41.101177 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7152): Terminated: ok {rc=0}
19:33:41.186716 bus /gobi_0: Setting Powered False
19:33:42.290649 bus /gobi_0: Setting Powered False
19:33:43.396720 bus /gobi_6: Setting Powered False
225gprs:trx-lms-limenet-micro8.0osmo-stp_10.42.42.5(pid=7162): Process ended prematurely: osmo-stp_10.42.42.5(pid=7162) [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7162)]2139iperf3.pyfalseFAILEDTraceback (most recent call last):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
self.path)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
spec.loader.exec_module( importlib.util.module_from_spec(spec) )
File "<frozen importlib._bootstrap_external>", line 728, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
setup_run_iperf3_test_parallel(1)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
ggsn.start()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
proc.launch_sync()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
raise e
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
self.wait()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
MainLoop.wait(self.terminated, timeout=timeout)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
self.poll(may_block=True)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
self.deferred_handling.handle_queue()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
handler(*args, **kwargs)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7162): Process ended prematurely: osmo-stp_10.42.42.5(pid=7162) [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7162)]
----------------------------------------------
trial-2363 gprs:trx-lms-limenet-micro iperf3.py
----------------------------------------------
19:33:44.512266 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:44.524174 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
19:33:44.667224 tst iperf3.py: using LAC 23236
19:33:44.796233 tst iperf3.py: using RAC 31
19:33:44.923309 tst iperf3.py: using CellId 23236
19:33:45.048801 tst iperf3.py: using BVCI 23237
19:33:45.072153 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:45.083124 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:45.093762 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:45.104659 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:45.115405 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:45.126242 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:45.137235 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:45.147835 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:45.158611 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
19:33:45.454944 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
19:33:45.591847 run iperf3-srv_10.42.42.10: Starting iperf3-srv
19:33:45.954908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7154): Launched
19:33:46.244483 run iperf3-srv_10.42.42.10(pid=7155): Launched
19:33:46.451458 tst iperf3.py:8: start network...
19:33:46.592542 run osmo-hlr_10.42.42.2: Starting osmo-hlr
19:33:47.141740 run create_hlr_db(pid=7156): Launched
19:33:47.318962 bus /gobi_6: Setting Powered False
19:33:48.339440 run create_hlr_db(pid=7156): Terminated: ok {rc=0}
19:33:48.744536 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7158): Launched
19:33:49.048929 run osmo-hlr_10.42.42.2(pid=7159): Launched
19:33:49.160784 run osmo-stp_10.42.42.5: Starting osmo-stp
19:33:49.692901 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7161): Launched
19:33:49.998522 run osmo-stp_10.42.42.5(pid=7162): Launched
19:33:50.109613 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:33:50.640417 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7164): Launched
19:33:50.748721 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:33:51.014946 run patchelf(pid=7165): Launched
19:33:51.192936 run osmo-stp_10.42.42.5(pid=7162): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7162)]
19:33:51.323344 run osmo-stp_10.42.42.5(pid=7162): stdout:
| (launched: 2022-12-09_19:33:49.848687)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
19:33:51.454365 run osmo-stp_10.42.42.5(pid=7162): stderr:
| �[0;m�[38;5;43m20221209193350016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209193350016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209193350016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209193350017 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209193350017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209193350017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209193350017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
19:33:51.580198 run osmo-stp_10.42.42.5(pid=7162): stdout:
| (launched: 2022-12-09_19:33:49.848687)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
19:33:51.705158 run osmo-stp_10.42.42.5(pid=7162): stderr:
| �[0;m�[38;5;43m20221209193350016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209193350016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209193350016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209193350017 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209193350017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209193350017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209193350017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
19:33:51.850599 run patchelf(pid=7165): Terminating (SIGINT)
19:33:52.021126 run patchelf(pid=7165): Terminated: ok {rc=0}
19:33:52.052565 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7162): Process ended prematurely: osmo-stp_10.42.42.5(pid=7162) [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7162)] [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3.py:8]
19:33:52.061951 tst iperf3.py:8: Test FAILED (7.6 sec)
19:33:52.121132 run osmo-hlr_10.42.42.2(pid=7159): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7159)]
19:33:52.168977 run osmo-hlr_10.42.42.2(pid=7159): stdout:
| (launched: 2022-12-09_19:33:48.899326)
19:33:52.217396 run osmo-hlr_10.42.42.2(pid=7159): stderr:
| �[0;m�[1;31m20221209193349073 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209193349073 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209193349073 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209193349074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209193349074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209193349074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209193349090 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209193349101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209193349102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209193349102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99)
19:33:52.258580 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7154): Terminating (SIGTERM)
19:33:52.298076 run iperf3-srv_10.42.42.10(pid=7155): Terminating (SIGTERM)
19:33:52.337231 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7158): Terminating (SIGTERM)
19:33:52.376290 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7161): Terminating (SIGTERM)
19:33:52.415769 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7164): Terminating (SIGTERM)
19:33:52.425294 --- ParallelTerminationStrategy: PID 7154 died...
19:33:52.478421 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7154): Terminated: ok {rc=0}
19:33:52.488345 --- ParallelTerminationStrategy: PID 7155 died...
19:33:52.541373 run iperf3-srv_10.42.42.10(pid=7155): Terminated {rc=256}
19:33:52.551243 --- ParallelTerminationStrategy: PID 7158 died...
19:33:52.603879 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7158): Terminated: ok {rc=0}
19:33:52.613804 --- ParallelTerminationStrategy: PID 7161 died...
19:33:52.666330 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7161): Terminated: ok {rc=0}
19:33:52.676025 --- ParallelTerminationStrategy: PID 7164 died...
19:33:52.728646 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7164): Terminated: ok {rc=0}
19:33:52.817002 bus /gobi_6: Setting Powered False
225gprs:trx-lms-limenet-micro12.0osmo-stp_10.42.42.5(pid=7180): Process ended prematurely: osmo-stp_10.42.42.5(pid=7180) [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7180)]2139iperf3m4.pyfalseFAILEDTraceback (most recent call last):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
self.path)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
spec.loader.exec_module( importlib.util.module_from_spec(spec) )
File "<frozen importlib._bootstrap_external>", line 728, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module>
setup_run_iperf3_test_parallel(4)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
ggsn.start()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
proc.launch_sync()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
raise e
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
self.wait()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
MainLoop.wait(self.terminated, timeout=timeout)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
self.poll(may_block=True)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
self.deferred_handling.handle_queue()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
handler(*args, **kwargs)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7180): Process ended prematurely: osmo-stp_10.42.42.5(pid=7180) [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7180)]
----------------------------------------------
trial-2363 gprs:trx-lms-limenet-micro iperf3m4.py
----------------------------------------------
19:33:53.927464 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:53.938867 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
19:33:54.078042 tst iperf3m4.py: using LAC 23237
19:33:54.198207 tst iperf3m4.py: using RAC 32
19:33:54.316313 tst iperf3m4.py: using CellId 23237
19:33:54.433857 tst iperf3m4.py: using BVCI 23238
19:33:54.457358 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:54.468104 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:54.478684 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:54.489335 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:54.499922 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:54.510544 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:54.521324 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:54.531816 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:33:54.542551 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
19:33:54.662535 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
19:33:54.783543 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
19:33:54.902846 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
19:33:55.204425 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
19:33:55.342560 run iperf3-srv_10.42.42.10: Starting iperf3-srv
19:33:55.680678 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7166): Launched
19:33:55.963297 run iperf3-srv_10.42.42.10(pid=7167): Launched
19:33:56.165147 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
19:33:56.302228 run iperf3-srv_10.42.42.10: Starting iperf3-srv
19:33:56.642735 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7168): Launched
19:33:56.924459 run iperf3-srv_10.42.42.10(pid=7169): Launched
19:33:57.125308 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
19:33:57.262029 run iperf3-srv_10.42.42.10: Starting iperf3-srv
19:33:57.602294 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7170): Launched
19:33:57.883939 run iperf3-srv_10.42.42.10(pid=7171): Launched
19:33:58.084775 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
19:33:58.222214 run iperf3-srv_10.42.42.10: Starting iperf3-srv
19:33:58.562629 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7172): Launched
19:33:58.845642 run iperf3-srv_10.42.42.10(pid=7173): Launched
19:33:59.046826 tst iperf3m4.py:8: start network...
19:33:59.184251 run osmo-hlr_10.42.42.2: Starting osmo-hlr
19:33:59.698845 run create_hlr_db(pid=7174): Launched
19:33:59.888524 bus /gobi_6: Setting Powered False
19:34:00.941902 run create_hlr_db(pid=7174): Terminated: ok {rc=0}
19:34:01.390106 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7176): Launched
19:34:01.812092 run osmo-hlr_10.42.42.2(pid=7177): Launched
19:34:01.940143 run osmo-stp_10.42.42.5: Starting osmo-stp
19:34:02.647192 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7179): Launched
19:34:02.946186 run osmo-stp_10.42.42.5(pid=7180): Launched
19:34:03.054789 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:34:03.577757 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7182): Launched
19:34:03.684641 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:34:03.948717 run patchelf(pid=7183): Launched
19:34:04.123794 run osmo-stp_10.42.42.5(pid=7180): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7180)]
19:34:04.252903 run osmo-stp_10.42.42.5(pid=7180): stdout:
| (launched: 2022-12-09_19:34:02.800006)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
19:34:04.381718 run osmo-stp_10.42.42.5(pid=7180): stderr:
| �[0;m�[38;5;43m20221209193402969 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209193402969 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209193402969 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209193402970 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209193402970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209193402970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209193402971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
19:34:04.505523 run osmo-stp_10.42.42.5(pid=7180): stdout:
| (launched: 2022-12-09_19:34:02.800006)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
19:34:04.628378 run osmo-stp_10.42.42.5(pid=7180): stderr:
| �[0;m�[38;5;43m20221209193402969 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209193402969 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209193402969 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209193402970 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209193402970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209193402970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209193402971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
19:34:04.771218 run patchelf(pid=7183): Terminating (SIGINT)
19:34:04.939261 run patchelf(pid=7183): Terminated: ok {rc=0}
19:34:04.970296 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7180): Process ended prematurely: osmo-stp_10.42.42.5(pid=7180) [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7180)] [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3m4.py:8]
19:34:04.979503 tst iperf3m4.py:8: Test FAILED (11.1 sec)
19:34:05.038457 run osmo-hlr_10.42.42.2(pid=7177): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-lms-limenet-micro↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7177)]
19:34:05.086241 run osmo-hlr_10.42.42.2(pid=7177): stdout:
| (launched: 2022-12-09_19:34:01.550629)
19:34:05.134694 run osmo-hlr_10.42.42.2(pid=7177): stderr:
| �[0;m�[1;31m20221209193401835 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209193401835 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209193401835 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209193401835 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209193401835 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209193401835 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209193401869 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-lms-limenet-micro/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209193401893 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209193401894 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209193401894 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99)
19:34:05.175735 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7166): Terminating (SIGTERM)
19:34:05.214395 run iperf3-srv_10.42.42.10(pid=7167): Terminating (SIGTERM)
19:34:05.253129 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7168): Terminating (SIGTERM)
19:34:05.291641 run iperf3-srv_10.42.42.10(pid=7169): Terminating (SIGTERM)
19:34:05.330279 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7170): Terminating (SIGTERM)
19:34:05.368657 run iperf3-srv_10.42.42.10(pid=7171): Terminating (SIGTERM)
19:34:05.407583 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7172): Terminating (SIGTERM)
19:34:05.446109 run iperf3-srv_10.42.42.10(pid=7173): Terminating (SIGTERM)
19:34:05.484679 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7176): Terminating (SIGTERM)
19:34:05.523146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7179): Terminating (SIGTERM)
19:34:05.561656 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7182): Terminating (SIGTERM)
19:34:05.570750 --- ParallelTerminationStrategy: PID 7166 died...
19:34:05.622784 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7166): Terminated: ok {rc=0}
19:34:05.632267 --- ParallelTerminationStrategy: PID 7167 died...
19:34:05.683596 run iperf3-srv_10.42.42.10(pid=7167): Terminated {rc=256}
19:34:05.692929 --- ParallelTerminationStrategy: PID 7168 died...
19:34:05.745475 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7168): Terminated: ok {rc=0}
19:34:05.754842 --- ParallelTerminationStrategy: PID 7169 died...
19:34:05.806234 run iperf3-srv_10.42.42.10(pid=7169): Terminated {rc=256}
19:34:05.815562 --- ParallelTerminationStrategy: PID 7170 died...
19:34:05.867025 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7170): Terminated: ok {rc=0}
19:34:05.876395 --- ParallelTerminationStrategy: PID 7171 died...
19:34:05.927733 run iperf3-srv_10.42.42.10(pid=7171): Terminated {rc=256}
19:34:05.937247 --- ParallelTerminationStrategy: PID 7172 died...
19:34:05.988416 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7172): Terminated: ok {rc=0}
19:34:05.997885 --- ParallelTerminationStrategy: PID 7173 died...
19:34:06.049292 run iperf3-srv_10.42.42.10(pid=7173): Terminated {rc=256}
19:34:06.058768 --- ParallelTerminationStrategy: PID 7176 died...
19:34:06.110415 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7176): Terminated: ok {rc=0}
19:34:06.119532 --- ParallelTerminationStrategy: PID 7179 died...
19:34:06.171334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7179): Terminated: ok {rc=0}
19:34:06.180603 --- ParallelTerminationStrategy: PID 7182 died...
19:34:06.232604 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7182): Terminated: ok {rc=0}
19:34:06.319477 bus /gobi_4: Setting Powered False
19:34:07.419819 bus /gobi_4: Setting Powered False
19:34:08.523661 bus /gobi_1: Setting Powered False
19:34:09.623557 bus /gobi_1: Setting Powered False
19:34:10.732804 bus /gobi_0: Setting Powered False
19:34:11.834072 bus /gobi_0: Setting Powered False
19:34:12.938091 bus /gobi_6: Setting Powered False
225gprs:trx-lms-limenet-micro7.0osmo-stp_10.42.42.5(pid=7191): Process ended prematurely: osmo-stp_10.42.42.5(pid=7191) [trial-2363↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7191)]2139ping.pyfalseFAILEDTraceback (most recent call last):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
self.path)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
spec.loader.exec_module( importlib.util.module_from_spec(spec) )
File "<frozen importlib._bootstrap_external>", line 728, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
ggsn.start()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
proc.launch_sync()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
raise e
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
self.wait()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
MainLoop.wait(self.terminated, timeout=timeout)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
self.poll(may_block=True)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
self.deferred_handling.handle_queue()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
handler(*args, **kwargs)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7191): Process ended prematurely: osmo-stp_10.42.42.5(pid=7191) [trial-2363↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7191)]
----------------------------------------------
trial-2363 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
19:34:14.005456 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:14.017325 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
19:34:14.156398 tst ping.py: using LAC 23238
19:34:14.281092 tst ping.py: using RAC 33
19:34:14.410457 tst ping.py: using CellId 23238
19:34:14.532387 tst ping.py: using BVCI 23239
19:34:14.556505 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:14.567707 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:14.578982 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:14.590281 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:14.601435 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:14.612526 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:14.623759 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:14.634963 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
19:34:14.922331 tst ping.py:19: start network...
19:34:15.054331 run osmo-hlr_10.42.42.2: Starting osmo-hlr
19:34:15.553149 run create_hlr_db(pid=7185): Launched
19:34:15.737352 bus /gobi_6: Setting Powered False
19:34:16.758381 run create_hlr_db(pid=7185): Terminated: ok {rc=0}
19:34:17.189073 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7187): Launched
19:34:17.510778 run osmo-hlr_10.42.42.2(pid=7188): Launched
19:34:17.622583 run osmo-stp_10.42.42.5: Starting osmo-stp
19:34:18.140128 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7190): Launched
19:34:18.440285 run osmo-stp_10.42.42.5(pid=7191): Launched
19:34:18.552850 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:34:19.070386 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7193): Launched
19:34:19.175683 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:34:19.433928 run patchelf(pid=7194): Launched
19:34:19.606240 run osmo-stp_10.42.42.5(pid=7191): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7191)]
19:34:19.732309 run osmo-stp_10.42.42.5(pid=7191): stdout:
| (launched: 2022-12-09_19:34:18.291358)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
19:34:19.858713 run osmo-stp_10.42.42.5(pid=7191): stderr:
| �[0;m�[38;5;43m20221209193418462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209193418462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209193418463 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209193418463 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209193418463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209193418463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209193418464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
19:34:19.980670 run osmo-stp_10.42.42.5(pid=7191): stdout:
| (launched: 2022-12-09_19:34:18.291358)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
19:34:20.101652 run osmo-stp_10.42.42.5(pid=7191): stderr:
| �[0;m�[38;5;43m20221209193418462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209193418462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209193418463 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209193418463 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209193418463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209193418463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209193418464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
19:34:20.242119 run patchelf(pid=7194): Terminating (SIGINT)
19:34:20.407683 run patchelf(pid=7194): Terminated: ok {rc=0}
19:34:20.437732 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=7191): Process ended prematurely: osmo-stp_10.42.42.5(pid=7191) [trial-2363↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7191)] [trial-2363↪gprs:trx-lms-limenet-micro↪ping.py:22]
19:34:20.446399 tst ping.py:22: Test FAILED (6.4 sec)
19:34:20.504922 run osmo-hlr_10.42.42.2(pid=7188): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7188)]
19:34:20.553093 run osmo-hlr_10.42.42.2(pid=7188): stdout:
| (launched: 2022-12-09_19:34:17.352208)
19:34:20.601916 run osmo-hlr_10.42.42.2(pid=7188): stderr:
| �[0;m�[1;31m20221209193417548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209193417548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209193417548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209193417548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209193417548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209193417548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209193417560 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209193417568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209193417568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209193417569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99)
19:34:20.643081 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7187): Terminating (SIGTERM)
19:34:20.682205 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7190): Terminating (SIGTERM)
19:34:20.721175 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7193): Terminating (SIGTERM)
19:34:20.730151 --- ParallelTerminationStrategy: PID 7187 died...
19:34:20.782426 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7187): Terminated: ok {rc=0}
19:34:20.791701 --- ParallelTerminationStrategy: PID 7190 died...
19:34:20.843690 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7190): Terminated: ok {rc=0}
19:34:20.853126 --- ParallelTerminationStrategy: PID 7193 died...
19:34:20.904632 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7193): Terminated: ok {rc=0}
19:34:20.989743 bus /gobi_6: Setting Powered False
225gprs:trx-lms-limenet-micro7.0osmo-stp_10.42.42.5(pid=7201): Process ended prematurely: osmo-stp_10.42.42.5(pid=7201) [trial-2363↪gprs:trx-lms-limenet-micro↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7201)]2139ping_idle_ping.pyfalseFAILEDTraceback (most recent call last):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
self.path)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
spec.loader.exec_module( importlib.util.module_from_spec(spec) )
File "<frozen importlib._bootstrap_external>", line 728, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
ggsn.start()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
proc.launch_sync()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
raise e
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
self.wait()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
MainLoop.wait(self.terminated, timeout=timeout)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
self.poll(may_block=True)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
self.deferred_handling.handle_queue()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
handler(*args, **kwargs)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7201): Process ended prematurely: osmo-stp_10.42.42.5(pid=7201) [trial-2363↪gprs:trx-lms-limenet-micro↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7201)]
----------------------------------------------
trial-2363 gprs:trx-lms-limenet-micro ping_idle_ping.py
----------------------------------------------
19:34:22.041498 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:22.052660 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
19:34:22.186399 tst ping_idle_ping.py: using LAC 23239
19:34:22.303500 tst ping_idle_ping.py: using RAC 34
19:34:22.420267 tst ping_idle_ping.py: using CellId 23239
19:34:22.537775 tst ping_idle_ping.py: using BVCI 23240
19:34:22.560314 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:22.571115 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:22.581580 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:22.592485 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:22.603324 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:22.614263 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:22.625326 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:34:22.636206 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
19:34:22.909119 tst ping_idle_ping.py:24: start network...
19:34:23.033154 run osmo-hlr_10.42.42.2: Starting osmo-hlr
19:34:23.510260 run create_hlr_db(pid=7195): Launched
19:34:23.682331 bus /gobi_6: Setting Powered False
19:34:24.704264 run create_hlr_db(pid=7195): Terminated: ok {rc=0}
19:34:25.100941 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7197): Launched
19:34:25.399519 run osmo-hlr_10.42.42.2(pid=7198): Launched
19:34:25.507893 run osmo-stp_10.42.42.5: Starting osmo-stp
19:34:26.028084 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7200): Launched
19:34:26.326681 run osmo-stp_10.42.42.5(pid=7201): Launched
19:34:26.434913 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:34:26.954363 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7203): Launched
19:34:27.060076 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:34:27.319778 run patchelf(pid=7204): Launched
19:34:27.493932 run osmo-stp_10.42.42.5(pid=7201): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-lms-limenet-micro↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7201)]
19:34:27.620880 run osmo-stp_10.42.42.5(pid=7201): stdout:
| (launched: 2022-12-09_19:34:26.179253)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
19:34:27.748549 run osmo-stp_10.42.42.5(pid=7201): stderr:
| �[0;m�[38;5;43m20221209193426348 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209193426348 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209193426348 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209193426349 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209193426349 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209193426349 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209193426349 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
19:34:27.871732 run osmo-stp_10.42.42.5(pid=7201): stdout:
| (launched: 2022-12-09_19:34:26.179253)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
19:34:27.994461 run osmo-stp_10.42.42.5(pid=7201): stderr:
| �[0;m�[38;5;43m20221209193426348 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209193426348 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209193426348 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209193426349 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209193426349 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209193426349 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209193426349 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
19:34:28.136234 run patchelf(pid=7204): Terminating (SIGINT)
19:34:28.302277 run patchelf(pid=7204): Terminated: ok {rc=0}
19:34:28.333127 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=7201): Process ended prematurely: osmo-stp_10.42.42.5(pid=7201) [trial-2363↪gprs:trx-lms-limenet-micro↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7201)] [trial-2363↪gprs:trx-lms-limenet-micro↪ping_idle_ping.py:27]
19:34:28.341870 tst ping_idle_ping.py:27: Test FAILED (6.3 sec)
19:34:28.400417 run osmo-hlr_10.42.42.2(pid=7198): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-lms-limenet-micro↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7198)]
19:34:28.448278 run osmo-hlr_10.42.42.2(pid=7198): stdout:
| (launched: 2022-12-09_19:34:25.252680)
19:34:28.496704 run osmo-hlr_10.42.42.2(pid=7198): stderr:
| �[0;m�[1;31m20221209193425426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209193425426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209193425427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209193425427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209193425427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209193425427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209193425439 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-lms-limenet-micro/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209193425448 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209193425448 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209193425449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99)
19:34:28.538064 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7197): Terminating (SIGTERM)
19:34:28.576873 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7200): Terminating (SIGTERM)
19:34:28.615698 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7203): Terminating (SIGTERM)
19:34:28.624658 --- ParallelTerminationStrategy: PID 7197 died...
19:34:28.677352 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7197): Terminated: ok {rc=0}
19:34:28.686897 --- ParallelTerminationStrategy: PID 7200 died...
19:34:28.738593 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7200): Terminated: ok {rc=0}
19:34:28.747918 --- ParallelTerminationStrategy: PID 7203 died...
19:34:28.799582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7203): Terminated: ok {rc=0}
19:34:28.886758 bus /gobi_6: Setting Powered False
5gprs:trx-lms-limenet-micro00