Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 225 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=5348): Process ended prematurely: osmo-stp_10.42.42.5(pid=5348) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5348)]

Standard Output

----------------------------------------------
trial-2363 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
19:11:42.753786 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:11:42.765330 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
19:11:42.934757 tst                        iperf3.py: using LAC 23118
19:11:43.063246 tst                        iperf3.py: using RAC 168
19:11:43.196321 tst                        iperf3.py: using CellId 23118
19:11:43.322686 tst                        iperf3.py: using BVCI 23119
19:11:43.348112 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:11:43.359701 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:11:43.371050 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:11:43.382639 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:11:43.394199 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:11:43.405674 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:11:43.417571 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:11:43.428906 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:11:43.440698 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
19:11:43.737590 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
19:11:43.875373 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:11:44.218280 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5340): Launched
19:11:44.501155 run iperf3-srv_10.42.42.10(pid=5341): Launched
19:11:44.704927 tst                      iperf3.py:8: start network...
19:11:44.843428 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:11:45.360805 run          create_hlr_db(pid=5342): Launched
19:11:45.551259 bus                          /gobi_6: Setting Powered False
19:11:46.573703 run          create_hlr_db(pid=5342): Terminated: ok {rc=0}
19:11:47.031821 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5344): Launched
19:11:47.366461 run    osmo-hlr_10.42.42.2(pid=5345): Launched
19:11:47.486774 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:11:48.062033 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5347): Launched
19:11:48.392592 run    osmo-stp_10.42.42.5(pid=5348): Launched
19:11:48.512814 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:11:49.086665 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5350): Launched
19:11:49.204621 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:11:49.491389 run               patchelf(pid=5351): Launched
19:11:49.685001 run    osmo-stp_10.42.42.5(pid=5348): ERR: Terminated: ERROR {rc=1}  [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5348)]
19:11:49.826160 run    osmo-stp_10.42.42.5(pid=5348): stdout: 
| (launched: 2022-12-09_19:11:48.229998)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:11:49.967591 run    osmo-stp_10.42.42.5(pid=5348): stderr: 
| �[0;m�[38;5;43m20221209191148423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209191148423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209191148423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209191148423 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209191148426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209191148426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209191148426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:11:50.104494 run    osmo-stp_10.42.42.5(pid=5348): stdout: 
| (launched: 2022-12-09_19:11:48.229998)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:11:50.239992 run    osmo-stp_10.42.42.5(pid=5348): stderr: 
| �[0;m�[38;5;43m20221209191148423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209191148423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209191148423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209191148423 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209191148426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209191148426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209191148426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:11:50.397385 run               patchelf(pid=5351): Terminating (SIGINT)
19:11:50.581845 run               patchelf(pid=5351): Terminated: ok {rc=0}
19:11:50.615757 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=5348): Process ended prematurely: osmo-stp_10.42.42.5(pid=5348) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5348)]  [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
19:11:50.626192 tst                      iperf3.py:8: Test FAILED (7.9 sec)
19:11:50.689235 run    osmo-hlr_10.42.42.2(pid=5345): ERR: Terminated: ERROR {rc=237}  [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5345)]
19:11:50.740166 run    osmo-hlr_10.42.42.2(pid=5345): stdout: 
| (launched: 2022-12-09_19:11:47.202788) 
19:11:50.791762 run    osmo-hlr_10.42.42.2(pid=5345): stderr: 
| �[0;m�[1;31m20221209191147400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209191147400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209191147400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209191147400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209191147400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209191147400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209191147413 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209191147421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209191147421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209191147421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:11:50.835618 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5340): Terminating (SIGTERM)
19:11:50.877416 run iperf3-srv_10.42.42.10(pid=5341): Terminating (SIGTERM)
19:11:50.919135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5344): Terminating (SIGTERM)
19:11:50.960421 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5347): Terminating (SIGTERM)
19:11:51.002127 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5350): Terminating (SIGTERM)
19:11:51.011936 ---      ParallelTerminationStrategy: PID 5340 died...
19:11:51.067632 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5340): Terminated: ok {rc=0}
19:11:51.077910 ---      ParallelTerminationStrategy: PID 5341 died...
19:11:51.133449 run iperf3-srv_10.42.42.10(pid=5341): Terminated {rc=256}
19:11:51.143444 ---      ParallelTerminationStrategy: PID 5344 died...
19:11:51.199181 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5344): Terminated: ok {rc=0}
19:11:51.209253 ---      ParallelTerminationStrategy: PID 5347 died...
19:11:51.264804 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5347): Terminated: ok {rc=0}
19:11:51.274788 ---      ParallelTerminationStrategy: PID 5350 died...
19:11:51.330406 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5350): Terminated: ok {rc=0}
19:11:51.417160 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5348): Process ended prematurely: osmo-stp_10.42.42.5(pid=5348) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5348)]