Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4674): Process ended prematurely: osmo-stp_10.42.42.5(pid=4674) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4674)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-sysmocell5000+mod-bts0-egprs iperf3.py ---------------------------------------------- 19:09:41.793518 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:41.805769 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:09:41.955202 tst iperf3.py: using LAC 23108 19:09:42.083664 tst iperf3.py: using RAC 158 19:09:42.211755 tst iperf3.py: using CellId 23108 19:09:42.334243 tst iperf3.py: using BVCI 23109 19:09:42.357840 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:42.368870 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:42.379738 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:42.390602 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:42.401226 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:42.412187 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:42.422980 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:42.433486 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:42.444092 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:09:42.722537 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:09:42.849536 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:09:43.165350 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4666): Launched 19:09:43.426738 run iperf3-srv_10.42.42.10(pid=4667): Launched 19:09:43.612885 tst iperf3.py:8: start network... 19:09:43.739869 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:09:44.225443 run create_hlr_db(pid=4668): Launched 19:09:44.399813 bus /gobi_6: Setting Powered False 19:09:45.421746 run create_hlr_db(pid=4668): Terminated: ok {rc=0} 19:09:45.862212 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4670): Launched 19:09:46.318863 run osmo-hlr_10.42.42.2(pid=4671): Launched 19:09:46.550360 run osmo-stp_10.42.42.5: Starting osmo-stp 19:09:47.162594 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4673): Launched 19:09:47.468300 run osmo-stp_10.42.42.5(pid=4674): Launched 19:09:47.580771 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:09:48.112099 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4676): Launched 19:09:48.220375 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:09:48.486027 run patchelf(pid=4677): Launched 19:09:48.664322 run osmo-stp_10.42.42.5(pid=4674): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4674)] 19:09:48.794425 run osmo-stp_10.42.42.5(pid=4674): stdout: | (launched: 2022-12-09_19:09:47.318260) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:09:48.924684 run osmo-stp_10.42.42.5(pid=4674): stderr: | �[0;m�[38;5;43m20221209190947485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209190947485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209190947486 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209190947486 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209190947487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209190947487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209190947487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:09:49.050289 run osmo-stp_10.42.42.5(pid=4674): stdout: | (launched: 2022-12-09_19:09:47.318260) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:09:49.174969 run osmo-stp_10.42.42.5(pid=4674): stderr: | �[0;m�[38;5;43m20221209190947485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209190947485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209190947486 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209190947486 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209190947487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209190947487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209190947487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:09:49.329695 run patchelf(pid=4677): Terminating (SIGINT) 19:09:49.497748 run patchelf(pid=4677): Terminated: ok {rc=0} 19:09:49.528706 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4674): Process ended prematurely: osmo-stp_10.42.42.5(pid=4674) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4674)] [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8] 19:09:49.537969 tst iperf3.py:8: Test FAILED (7.8 sec) 19:09:49.597786 run osmo-hlr_10.42.42.2(pid=4671): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4671)] 19:09:49.646527 run osmo-hlr_10.42.42.2(pid=4671): stdout: | (launched: 2022-12-09_19:09:46.046500) 19:09:49.695487 run osmo-hlr_10.42.42.2(pid=4671): stderr: | �[0;m�[1;31m20221209190946383 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209190946384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209190946384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209190946384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209190946384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209190946384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209190946403 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-sysmocell5000+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209190946420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209190946420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209190946420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:09:49.737546 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4666): Terminating (SIGTERM) 19:09:49.777178 run iperf3-srv_10.42.42.10(pid=4667): Terminating (SIGTERM) 19:09:49.816822 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4670): Terminating (SIGTERM) 19:09:49.856572 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4673): Terminating (SIGTERM) 19:09:49.896359 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4676): Terminating (SIGTERM) 19:09:49.905561 --- ParallelTerminationStrategy: PID 4666 died... 19:09:49.958446 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4666): Terminated: ok {rc=0} 19:09:49.967833 --- ParallelTerminationStrategy: PID 4667 died... 19:09:50.019991 run iperf3-srv_10.42.42.10(pid=4667): Terminated {rc=256} 19:09:50.029501 --- ParallelTerminationStrategy: PID 4670 died... 19:09:50.081857 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4670): Terminated: ok {rc=0} 19:09:50.091404 --- ParallelTerminationStrategy: PID 4673 died... 19:09:50.143760 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4673): Terminated: ok {rc=0} 19:09:50.153266 --- ParallelTerminationStrategy: PID 4676 died... 19:09:50.205507 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4676): Terminated: ok {rc=0} 19:09:50.293913 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4674): Process ended prematurely: osmo-stp_10.42.42.5(pid=4674) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4674)]