Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=5925): Process ended prematurely: osmo-stp_10.42.42.5(pid=5925) [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5925)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-umtrx+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 19:19:59.883497 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:19:59.895163 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:20:00.053281 tst iperf3.py: using LAC 23162 19:20:00.172021 tst iperf3.py: using RAC 212 19:20:00.299946 tst iperf3.py: using CellId 23162 19:20:00.427637 tst iperf3.py: using BVCI 23163 19:20:00.452620 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:20:00.464133 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:20:00.475431 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:20:00.487066 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:20:00.498359 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:20:00.509708 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:20:00.520919 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:20:00.533510 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:20:00.544934 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:20:00.828404 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:20:00.975096 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:20:01.340694 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5914): Launched 19:20:01.662083 run iperf3-srv_10.42.42.10(pid=5918): Launched 19:20:01.857767 tst iperf3.py:8: start network... 19:20:01.989199 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:20:02.493146 run create_hlr_db(pid=5919): Launched 19:20:02.680432 bus /gobi_6: Setting Powered False 19:20:03.702031 run create_hlr_db(pid=5919): Terminated: ok {rc=0} 19:20:04.107358 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5921): Launched 19:20:04.409629 run osmo-hlr_10.42.42.2(pid=5922): Launched 19:20:04.522242 run osmo-stp_10.42.42.5: Starting osmo-stp 19:20:05.050040 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5924): Launched 19:20:05.353847 run osmo-stp_10.42.42.5(pid=5925): Launched 19:20:05.464571 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:20:05.996193 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5927): Launched 19:20:06.103871 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:20:06.368101 run patchelf(pid=5928): Launched 19:20:06.545061 run osmo-stp_10.42.42.5(pid=5925): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5925)] 19:20:06.674380 run osmo-stp_10.42.42.5(pid=5925): stdout: | (launched: 2022-12-09_19:20:05.204118) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:20:06.804149 run osmo-stp_10.42.42.5(pid=5925): stderr: | �[0;m�[38;5;43m20221209192005375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209192005375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209192005375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209192005376 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209192005376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209192005376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209192005376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:20:06.929194 run osmo-stp_10.42.42.5(pid=5925): stdout: | (launched: 2022-12-09_19:20:05.204118) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:20:07.053263 run osmo-stp_10.42.42.5(pid=5925): stderr: | �[0;m�[38;5;43m20221209192005375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209192005375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209192005375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209192005376 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209192005376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209192005376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209192005376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:20:07.198694 run patchelf(pid=5928): Terminating (SIGINT) 19:20:07.368662 run patchelf(pid=5928): Terminated: ok {rc=0} 19:20:07.400082 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=5925): Process ended prematurely: osmo-stp_10.42.42.5(pid=5925) [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5925)] [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8] 19:20:07.409508 tst iperf3.py:8: Test FAILED (7.6 sec) 19:20:07.468597 run osmo-hlr_10.42.42.2(pid=5922): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5922)] 19:20:07.517360 run osmo-hlr_10.42.42.2(pid=5922): stdout: | (launched: 2022-12-09_19:20:04.261391) 19:20:07.566398 run osmo-hlr_10.42.42.2(pid=5922): stderr: | �[0;m�[1;31m20221209192004438 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209192004438 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209192004438 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209192004438 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209192004438 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209192004438 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209192004451 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-umtrx+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209192004462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209192004462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209192004462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:20:07.607817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5914): Terminating (SIGTERM) 19:20:07.646850 run iperf3-srv_10.42.42.10(pid=5918): Terminating (SIGTERM) 19:20:07.686478 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5921): Terminating (SIGTERM) 19:20:07.725553 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5924): Terminating (SIGTERM) 19:20:07.765025 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5927): Terminating (SIGTERM) 19:20:07.774000 --- ParallelTerminationStrategy: PID 5914 died... 19:20:07.826274 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5914): Terminated: ok {rc=0} 19:20:07.835587 --- ParallelTerminationStrategy: PID 5918 died... 19:20:07.887523 run iperf3-srv_10.42.42.10(pid=5918): Terminated {rc=256} 19:20:07.896875 --- ParallelTerminationStrategy: PID 5921 died... 19:20:07.948853 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5921): Terminated: ok {rc=0} 19:20:07.958219 --- ParallelTerminationStrategy: PID 5924 died... 19:20:08.010106 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5924): Terminated: ok {rc=0} 19:20:08.019458 --- ParallelTerminationStrategy: PID 5927 died... 19:20:08.071442 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5927): Terminated: ok {rc=0} 19:20:08.159029 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5925): Process ended prematurely: osmo-stp_10.42.42.5(pid=5925) [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5925)]