Failed
gprs:sysmo+mod-bts0-dynts-osmo.iperf3.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=2508): Process ended prematurely: osmo-stp_10.42.42.5(pid=2508) [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2508)]
Standard Output
---------------------------------------------- trial-2363 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 18:46:18.678674 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:18.689852 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:46:18.835951 tst iperf3.py: using LAC 22983 18:46:18.954912 tst iperf3.py: using RAC 33 18:46:19.071350 tst iperf3.py: using CellId 22983 18:46:19.189911 tst iperf3.py: using BVCI 22984 18:46:19.212777 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:19.223409 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:19.234011 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:19.244308 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:19.254646 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:19.265271 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:19.275723 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:19.286204 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:19.296698 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:46:19.571387 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:46:19.696285 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:46:20.007287 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2500): Launched 18:46:20.266156 run iperf3-srv_10.42.42.10(pid=2501): Launched 18:46:20.448738 tst iperf3.py:8: start network... 18:46:20.573286 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:46:21.051451 run create_hlr_db(pid=2502): Launched 18:46:21.223330 bus /gobi_6: Setting Powered False 18:46:22.256437 run create_hlr_db(pid=2502): Terminated: ok {rc=0} 18:46:22.659694 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2504): Launched 18:46:22.957915 run osmo-hlr_10.42.42.2(pid=2505): Launched 18:46:23.073329 run osmo-stp_10.42.42.5: Starting osmo-stp 18:46:23.600898 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2507): Launched 18:46:23.900276 run osmo-stp_10.42.42.5(pid=2508): Launched 18:46:24.009472 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:46:24.530442 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2510): Launched 18:46:24.636932 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:46:24.898229 run patchelf(pid=2511): Launched 18:46:25.072929 run osmo-stp_10.42.42.5(pid=2508): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2508)] 18:46:25.201400 run osmo-stp_10.42.42.5(pid=2508): stdout: | (launched: 2022-12-09_18:46:23.752939) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:46:25.329881 run osmo-stp_10.42.42.5(pid=2508): stderr: | �[0;m�[38;5;43m20221209184623925 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184623926 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184623926 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184623926 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184623927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184623927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184623927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:46:25.454376 run osmo-stp_10.42.42.5(pid=2508): stdout: | (launched: 2022-12-09_18:46:23.752939) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:46:25.577170 run osmo-stp_10.42.42.5(pid=2508): stderr: | �[0;m�[38;5;43m20221209184623925 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184623926 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184623926 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184623926 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184623927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184623927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184623927 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:46:25.720239 run patchelf(pid=2511): Terminating (SIGINT) 18:46:25.889181 run patchelf(pid=2511): Terminated: ok {rc=0} 18:46:25.919981 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=2508): Process ended prematurely: osmo-stp_10.42.42.5(pid=2508) [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2508)] [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8] 18:46:25.929130 tst iperf3.py:8: Test FAILED (7.3 sec) 18:46:25.987773 run osmo-hlr_10.42.42.2(pid=2505): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2505)] 18:46:26.035851 run osmo-hlr_10.42.42.2(pid=2505): stdout: | (launched: 2022-12-09_18:46:22.811541) 18:46:26.084438 run osmo-hlr_10.42.42.2(pid=2505): stderr: | �[0;m�[1;31m20221209184622989 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209184622989 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209184622989 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209184622989 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209184622989 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209184622989 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209184623001 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209184623010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209184623010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209184623010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:46:26.126177 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2500): Terminating (SIGTERM) 18:46:26.165108 run iperf3-srv_10.42.42.10(pid=2501): Terminating (SIGTERM) 18:46:26.204018 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2504): Terminating (SIGTERM) 18:46:26.242850 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2507): Terminating (SIGTERM) 18:46:26.281596 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2510): Terminating (SIGTERM) 18:46:26.290240 --- ParallelTerminationStrategy: PID 2500 died... 18:46:26.342343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2500): Terminated: ok {rc=0} 18:46:26.352025 --- ParallelTerminationStrategy: PID 2501 died... 18:46:26.403891 run iperf3-srv_10.42.42.10(pid=2501): Terminated {rc=256} 18:46:26.413300 --- ParallelTerminationStrategy: PID 2504 died... 18:46:26.465110 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2504): Terminated: ok {rc=0} 18:46:26.474474 --- ParallelTerminationStrategy: PID 2507 died... 18:46:26.526475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2507): Terminated: ok {rc=0} 18:46:26.535836 --- ParallelTerminationStrategy: PID 2510 died... 18:46:26.587651 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2510): Terminated: ok {rc=0} 18:46:26.670137 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2508): Process ended prematurely: osmo-stp_10.42.42.5(pid=2508) [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2508)]