Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16517): Process ended prematurely: osmo-stp_10.42.42.5(pid=16517) [trial-2364↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16517)]
Standard Output
---------------------------------------------- trial-2364 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 21:15:33.786854 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:15:33.798485 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 21:15:33.942546 tst iperf3.py: using LAC 23773 21:15:34.061105 tst iperf3.py: using RAC 58 21:15:34.180797 tst iperf3.py: using CellId 23773 21:15:34.300618 tst iperf3.py: using BVCI 23774 21:15:34.324119 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:15:34.335444 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:15:34.346470 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:15:34.357621 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:15:34.368549 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:15:34.379552 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:15:34.390678 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:15:34.401692 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:15:34.412887 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:15:34.711708 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:15:34.849287 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:15:35.189273 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16509): Launched 21:15:35.472401 run iperf3-srv_10.42.42.10(pid=16510): Launched 21:15:35.674356 tst iperf3.py:8: start network... 21:15:35.811556 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:15:36.337814 run create_hlr_db(pid=16511): Launched 21:15:36.527287 bus /gobi_6: Setting Powered False 21:15:37.548830 run create_hlr_db(pid=16511): Terminated: ok {rc=0} 21:15:37.960290 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16513): Launched 21:15:38.267592 run osmo-hlr_10.42.42.2(pid=16514): Launched 21:15:38.387734 run osmo-stp_10.42.42.5: Starting osmo-stp 21:15:38.931808 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16516): Launched 21:15:39.238885 run osmo-stp_10.42.42.5(pid=16517): Launched 21:15:39.350536 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:15:39.886676 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16519): Launched 21:15:39.996753 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:15:40.266961 run patchelf(pid=16520): Launched 21:15:40.445469 run osmo-stp_10.42.42.5(pid=16517): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16517)] 21:15:40.576073 run osmo-stp_10.42.42.5(pid=16517): stdout: | (launched: 2022-12-09_21:15:39.087209) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:15:40.706217 run osmo-stp_10.42.42.5(pid=16517): stderr: | �[0;m�[38;5;43m20221209211539260 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209211539261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209211539261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209211539261 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209211539262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209211539262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209211539262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:15:40.831930 run osmo-stp_10.42.42.5(pid=16517): stdout: | (launched: 2022-12-09_21:15:39.087209) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:15:40.957189 run osmo-stp_10.42.42.5(pid=16517): stderr: | �[0;m�[38;5;43m20221209211539260 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209211539261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209211539261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209211539261 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209211539262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209211539262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209211539262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:15:41.103735 run patchelf(pid=16520): Terminating (SIGINT) 21:15:41.275860 run patchelf(pid=16520): Terminated: ok {rc=0} 21:15:41.307552 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16517): Process ended prematurely: osmo-stp_10.42.42.5(pid=16517) [trial-2364↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16517)] [trial-2364↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 21:15:41.316928 tst iperf3.py:8: Test FAILED (7.6 sec) 21:15:41.377283 run osmo-hlr_10.42.42.2(pid=16514): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16514)] 21:15:41.425971 run osmo-hlr_10.42.42.2(pid=16514): stdout: | (launched: 2022-12-09_21:15:38.116260) 21:15:41.475201 run osmo-hlr_10.42.42.2(pid=16514): stderr: | �[0;m�[1;31m20221209211538293 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209211538293 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209211538293 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209211538293 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209211538293 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209211538293 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209211538306 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209211538315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209211538315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209211538315 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:15:41.516831 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16509): Terminating (SIGTERM) 21:15:41.556357 run iperf3-srv_10.42.42.10(pid=16510): Terminating (SIGTERM) 21:15:41.596207 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16513): Terminating (SIGTERM) 21:15:41.635514 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16516): Terminating (SIGTERM) 21:15:41.674866 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16519): Terminating (SIGTERM) 21:15:41.684280 --- ParallelTerminationStrategy: PID 16509 died... 21:15:41.737051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16509): Terminated: ok {rc=0} 21:15:41.746936 --- ParallelTerminationStrategy: PID 16510 died... 21:15:41.799962 run iperf3-srv_10.42.42.10(pid=16510): Terminated {rc=256} 21:15:41.809800 --- ParallelTerminationStrategy: PID 16513 died... 21:15:41.862660 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16513): Terminated: ok {rc=0} 21:15:41.872631 --- ParallelTerminationStrategy: PID 16516 died... 21:15:41.925849 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16516): Terminated: ok {rc=0} 21:15:41.935612 --- ParallelTerminationStrategy: PID 16519 died... 21:15:41.988581 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16519): Terminated: ok {rc=0} 21:15:42.072389 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16517): Process ended prematurely: osmo-stp_10.42.42.5(pid=16517) [trial-2364↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16517)]