Failed
gprs:oc2g+mod-bts0-dynts-osmo.iperf3.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11097): Process ended prematurely: osmo-stp_10.42.42.5(pid=11097) [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11097)]
Standard Output
---------------------------------------------- trial-2364 gprs:oc2g+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 20:21:43.807202 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:43.819057 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:21:43.972401 tst iperf3.py: using LAC 23486 20:21:44.091944 tst iperf3.py: using RAC 26 20:21:44.218270 tst iperf3.py: using CellId 23486 20:21:44.348548 tst iperf3.py: using BVCI 23487 20:21:44.371870 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:44.382698 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:44.393664 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:44.404663 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:44.415561 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:44.426452 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:44.437489 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:44.448132 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:44.459343 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:21:44.755848 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 20:21:44.893498 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:21:45.230890 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11089): Launched 20:21:45.510335 run iperf3-srv_10.42.42.10(pid=11090): Launched 20:21:45.709671 tst iperf3.py:8: start network... 20:21:45.847576 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:21:46.414391 run create_hlr_db(pid=11091): Launched 20:21:46.604919 bus /gobi_6: Setting Powered False 20:21:47.614719 run create_hlr_db(pid=11091): Terminated: ok {rc=0} 20:21:48.056381 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11093): Launched 20:21:48.383491 run osmo-hlr_10.42.42.2(pid=11094): Launched 20:21:48.503158 run osmo-stp_10.42.42.5: Starting osmo-stp 20:21:49.071382 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11096): Launched 20:21:49.397244 run osmo-stp_10.42.42.5(pid=11097): Launched 20:21:49.514880 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:21:50.083585 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11099): Launched 20:21:50.200024 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:21:50.484348 run patchelf(pid=11100): Launched 20:21:50.674182 run osmo-stp_10.42.42.5(pid=11097): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11097)] 20:21:50.813401 run osmo-stp_10.42.42.5(pid=11097): stdout: | (launched: 2022-12-09_20:21:49.237218) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:21:50.953225 run osmo-stp_10.42.42.5(pid=11097): stderr: | �[0;m�[38;5;43m20221209202149430 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202149430 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202149430 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202149431 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202149431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202149431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202149431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:21:51.087852 run osmo-stp_10.42.42.5(pid=11097): stdout: | (launched: 2022-12-09_20:21:49.237218) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:21:51.221405 run osmo-stp_10.42.42.5(pid=11097): stderr: | �[0;m�[38;5;43m20221209202149430 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202149430 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202149430 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202149431 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202149431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202149431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202149431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:21:51.376544 run patchelf(pid=11100): Terminating (SIGINT) 20:21:51.558560 run patchelf(pid=11100): Terminated: ok {rc=0} 20:21:51.592112 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11097): Process ended prematurely: osmo-stp_10.42.42.5(pid=11097) [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11097)] [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8] 20:21:51.602203 tst iperf3.py:8: Test FAILED (7.8 sec) 20:21:51.664512 run osmo-hlr_10.42.42.2(pid=11094): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11094)] 20:21:51.715704 run osmo-hlr_10.42.42.2(pid=11094): stdout: | (launched: 2022-12-09_20:21:48.222285) 20:21:51.767846 run osmo-hlr_10.42.42.2(pid=11094): stderr: | �[0;m�[1;31m20221209202148424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209202148424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209202148424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209202148424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209202148424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209202148424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209202148436 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:oc2g+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209202148444 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209202148445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209202148445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:21:51.811775 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11089): Terminating (SIGTERM) 20:21:51.853145 run iperf3-srv_10.42.42.10(pid=11090): Terminating (SIGTERM) 20:21:51.894478 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11093): Terminating (SIGTERM) 20:21:51.935643 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11096): Terminating (SIGTERM) 20:21:51.977015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11099): Terminating (SIGTERM) 20:21:51.986515 --- ParallelTerminationStrategy: PID 11089 died... 20:21:52.042029 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11089): Terminated: ok {rc=0} 20:21:52.052106 --- ParallelTerminationStrategy: PID 11090 died... 20:21:52.107489 run iperf3-srv_10.42.42.10(pid=11090): Terminated {rc=256} 20:21:52.117331 --- ParallelTerminationStrategy: PID 11093 died... 20:21:52.172077 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11093): Terminated: ok {rc=0} 20:21:52.181901 --- ParallelTerminationStrategy: PID 11096 died... 20:21:52.237154 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11096): Terminated: ok {rc=0} 20:21:52.247111 --- ParallelTerminationStrategy: PID 11099 died... 20:21:52.302582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11099): Terminated: ok {rc=0} 20:21:52.388839 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11097): Process ended prematurely: osmo-stp_10.42.42.5(pid=11097) [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11097)]