Failed
gprs:sysmo+mod-bts0-dynts-osmo.iperf3.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10497): Process ended prematurely: osmo-stp_10.42.42.5(pid=10497) [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10497)]
Standard Output
---------------------------------------------- trial-2364 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 20:13:50.461198 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:50.473109 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:13:50.633973 tst iperf3.py: using LAC 23444 20:13:50.762995 tst iperf3.py: using RAC 239 20:13:50.890459 tst iperf3.py: using CellId 23444 20:13:51.017085 tst iperf3.py: using BVCI 23445 20:13:51.042331 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:51.053600 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:51.064632 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:51.075761 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:51.086981 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:51.098308 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:51.109573 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:51.120536 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:51.131797 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:13:51.430349 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 20:13:51.569117 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:13:51.908427 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10489): Launched 20:13:52.190307 run iperf3-srv_10.42.42.10(pid=10490): Launched 20:13:52.391735 tst iperf3.py:8: start network... 20:13:52.529359 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:13:53.051574 run create_hlr_db(pid=10491): Launched 20:13:53.241232 bus /gobi_6: Setting Powered False 20:13:54.261415 run create_hlr_db(pid=10491): Terminated: ok {rc=0} 20:13:54.673971 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10493): Launched 20:13:54.979279 run osmo-hlr_10.42.42.2(pid=10494): Launched 20:13:55.100040 run osmo-stp_10.42.42.5: Starting osmo-stp 20:13:55.641134 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10496): Launched 20:13:55.947220 run osmo-stp_10.42.42.5(pid=10497): Launched 20:13:56.058786 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:13:56.593065 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10499): Launched 20:13:56.702294 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:13:56.968771 run patchelf(pid=10500): Launched 20:13:57.147812 run osmo-stp_10.42.42.5(pid=10497): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10497)] 20:13:57.278821 run osmo-stp_10.42.42.5(pid=10497): stdout: | (launched: 2022-12-09_20:13:55.796647) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:13:57.410052 run osmo-stp_10.42.42.5(pid=10497): stderr: | �[0;m�[38;5;43m20221209201355965 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201355966 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201355966 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201355966 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201355967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201355967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201355967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:13:57.536636 run osmo-stp_10.42.42.5(pid=10497): stdout: | (launched: 2022-12-09_20:13:55.796647) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:13:57.662584 run osmo-stp_10.42.42.5(pid=10497): stderr: | �[0;m�[38;5;43m20221209201355965 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201355966 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201355966 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201355966 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201355967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201355967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201355967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:13:57.809173 run patchelf(pid=10500): Terminating (SIGINT) 20:13:57.981980 run patchelf(pid=10500): Terminated: ok {rc=0} 20:13:58.013800 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10497): Process ended prematurely: osmo-stp_10.42.42.5(pid=10497) [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10497)] [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8] 20:13:58.023154 tst iperf3.py:8: Test FAILED (7.6 sec) 20:13:58.083957 run osmo-hlr_10.42.42.2(pid=10494): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10494)] 20:13:58.133348 run osmo-hlr_10.42.42.2(pid=10494): stdout: | (launched: 2022-12-09_20:13:54.829528) 20:13:58.183434 run osmo-hlr_10.42.42.2(pid=10494): stderr: | �[0;m�[1;31m20221209201355005 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209201355005 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209201355005 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209201355005 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209201355005 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209201355005 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209201355019 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209201355028 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209201355028 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209201355028 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:13:58.225606 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10489): Terminating (SIGTERM) 20:13:58.265430 run iperf3-srv_10.42.42.10(pid=10490): Terminating (SIGTERM) 20:13:58.305430 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10493): Terminating (SIGTERM) 20:13:58.345277 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10496): Terminating (SIGTERM) 20:13:58.385166 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10499): Terminating (SIGTERM) 20:13:58.394625 --- ParallelTerminationStrategy: PID 10489 died... 20:13:58.448738 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10489): Terminated: ok {rc=0} 20:13:58.458357 --- ParallelTerminationStrategy: PID 10490 died... 20:13:58.511251 run iperf3-srv_10.42.42.10(pid=10490): Terminated {rc=256} 20:13:58.520915 --- ParallelTerminationStrategy: PID 10493 died... 20:13:58.573865 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10493): Terminated: ok {rc=0} 20:13:58.583674 --- ParallelTerminationStrategy: PID 10496 died... 20:13:58.636688 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10496): Terminated: ok {rc=0} 20:13:58.646232 --- ParallelTerminationStrategy: PID 10499 died... 20:13:58.699103 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10499): Terminated: ok {rc=0} 20:13:58.787666 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10497): Process ended prematurely: osmo-stp_10.42.42.5(pid=10497) [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10497)]