Skip to content

Failed

gprs:sysmo+mod-bts0-egprs.ping.py (from gprs_sysmo+mod-bts0-egprs)

Failing for the past 34 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10387): Process ended prematurely: osmo-stp_10.42.42.5(pid=10387) [trial-2364↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10387)]

Standard Output

----------------------------------------------
trial-2364 gprs:sysmo+mod-bts0-egprs ping.py
----------------------------------------------
20:12:19.803259 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:12:19.815403 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1)
20:12:19.948509 tst                          ping.py: using LAC 23436
20:12:20.074431 tst                          ping.py: using RAC 231
20:12:20.201299 tst                          ping.py: using CellId 23436
20:12:20.329521 tst                          ping.py: using BVCI 23437
20:12:20.354218 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:12:20.365688 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:12:20.376804 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:12:20.388186 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:12:20.399380 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:12:20.410571 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:12:20.421928 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:12:20.433299 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
20:12:20.714426 tst                       ping.py:19: start network...
20:12:20.839854 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:12:21.314303 run         create_hlr_db(pid=10381): Launched
20:12:21.487473 bus                          /gobi_6: Setting Powered False
20:12:22.509595 run         create_hlr_db(pid=10381): Terminated: ok {rc=0}
20:12:22.939416 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10383): Launched
20:12:23.262305 run   osmo-hlr_10.42.42.2(pid=10384): Launched
20:12:23.380173 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:12:23.941546 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10386): Launched
20:12:24.263119 run   osmo-stp_10.42.42.5(pid=10387): Launched
20:12:24.383884 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:12:24.947481 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10389): Launched
20:12:25.062718 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:12:25.343187 run              patchelf(pid=10390): Launched
20:12:25.531563 run   osmo-stp_10.42.42.5(pid=10387): ERR: Terminated: ERROR {rc=1}  [trial-2364↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10387)]
20:12:25.668771 run   osmo-stp_10.42.42.5(pid=10387): stdout: 
| (launched: 2022-12-09_20:12:24.105246)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:12:25.806638 run   osmo-stp_10.42.42.5(pid=10387): stderr: 
| �[0;m�[38;5;43m20221209201224295 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209201224296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209201224296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209201224296 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209201224297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209201224297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209201224297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:12:25.939259 run   osmo-stp_10.42.42.5(pid=10387): stdout: 
| (launched: 2022-12-09_20:12:24.105246)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:12:26.071067 run   osmo-stp_10.42.42.5(pid=10387): stderr: 
| �[0;m�[38;5;43m20221209201224295 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209201224296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209201224296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209201224296 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209201224297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209201224297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209201224297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:12:26.225605 run              patchelf(pid=10390): Terminating (SIGINT)
20:12:26.394758 run              patchelf(pid=10390): Terminated: ok {rc=0}
20:12:26.425849 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10387): Process ended prematurely: osmo-stp_10.42.42.5(pid=10387) [trial-2364↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10387)]  [trial-2364↪gprs:sysmo+mod-bts0-egprs↪ping.py:22]
20:12:26.434769 tst                       ping.py:22: Test FAILED (6.6 sec)
20:12:26.497464 run   osmo-hlr_10.42.42.2(pid=10384): ERR: Terminated: ERROR {rc=237}  [trial-2364↪gprs:sysmo+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10384)]
20:12:26.547749 run   osmo-hlr_10.42.42.2(pid=10384): stdout: 
| (launched: 2022-12-09_20:12:23.104523) 
20:12:26.598383 run   osmo-hlr_10.42.42.2(pid=10384): stderr: 
| �[0;m�[1;31m20221209201223302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209201223302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209201223302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209201223302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209201223302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209201223302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209201223315 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:sysmo+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209201223323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209201223323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209201223323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:12:26.640742 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10383): Terminating (SIGTERM)
20:12:26.681520 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10386): Terminating (SIGTERM)
20:12:26.722018 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10389): Terminating (SIGTERM)
20:12:26.731947 ---      ParallelTerminationStrategy: PID 10383 died...
20:12:26.786738 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10383): Terminated: ok {rc=0}
20:12:26.796522 ---      ParallelTerminationStrategy: PID 10386 died...
20:12:26.850443 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10386): Terminated: ok {rc=0}
20:12:26.860821 ---      ParallelTerminationStrategy: PID 10389 died...
20:12:26.914491 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10389): Terminated: ok {rc=0}
20:12:27.004657 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10387): Process ended prematurely: osmo-stp_10.42.42.5(pid=10387) [trial-2364↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10387)]