Failed
gprs:trx-b200+mod-bts0-dynts-osmo.ping.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12000): Process ended prematurely: osmo-stp_10.42.42.5(pid=12000) [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12000)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-b200+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 20:30:51.675465 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:51.687452 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:30:51.855366 tst ping.py: using LAC 23534 20:30:51.990163 tst ping.py: using RAC 74 20:30:52.118495 tst ping.py: using CellId 23534 20:30:52.244030 tst ping.py: using BVCI 23535 20:30:52.268783 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:52.280114 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:52.291324 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:52.302597 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:52.313663 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:52.324760 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:52.336177 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:52.347425 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:30:52.640190 tst ping.py:19: start network... 20:30:52.774727 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:30:53.290913 run create_hlr_db(pid=11994): Launched 20:30:53.477995 bus /gobi_6: Setting Powered False 20:30:54.498099 run create_hlr_db(pid=11994): Terminated: ok {rc=0} 20:30:54.904131 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11996): Launched 20:30:55.206634 run osmo-hlr_10.42.42.2(pid=11997): Launched 20:30:55.324549 run osmo-stp_10.42.42.5: Starting osmo-stp 20:30:55.864585 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11999): Launched 20:30:56.166637 run osmo-stp_10.42.42.5(pid=12000): Launched 20:30:56.276255 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:30:56.809302 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12002): Launched 20:30:56.924501 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:30:57.206552 run patchelf(pid=12003): Launched 20:30:57.395587 run osmo-stp_10.42.42.5(pid=12000): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12000)] 20:30:57.533935 run osmo-stp_10.42.42.5(pid=12000): stdout: | (launched: 2022-12-09_20:30:56.018574) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:30:57.672283 run osmo-stp_10.42.42.5(pid=12000): stderr: | �[0;m�[38;5;43m20221209203056191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209203056191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209203056192 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209203056192 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209203056193 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209203056193 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209203056193 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:30:57.805506 run osmo-stp_10.42.42.5(pid=12000): stdout: | (launched: 2022-12-09_20:30:56.018574) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:30:57.937576 run osmo-stp_10.42.42.5(pid=12000): stderr: | �[0;m�[38;5;43m20221209203056191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209203056191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209203056192 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209203056192 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209203056193 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209203056193 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209203056193 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:30:58.091530 run patchelf(pid=12003): Terminating (SIGINT) 20:30:58.271348 run patchelf(pid=12003): Terminated: ok {rc=0} 20:30:58.303972 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=12000): Process ended prematurely: osmo-stp_10.42.42.5(pid=12000) [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12000)] [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22] 20:30:58.313351 tst ping.py:22: Test FAILED (6.6 sec) 20:30:58.376013 run osmo-hlr_10.42.42.2(pid=11997): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11997)] 20:30:58.427335 run osmo-hlr_10.42.42.2(pid=11997): stdout: | (launched: 2022-12-09_20:30:55.057952) 20:30:58.478990 run osmo-hlr_10.42.42.2(pid=11997): stderr: | �[0;m�[1;31m20221209203055235 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209203055235 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209203055235 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209203055235 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209203055235 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209203055236 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209203055247 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-b200+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209203055256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209203055257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209203055257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:30:58.523000 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11996): Terminating (SIGTERM) 20:30:58.564496 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11999): Terminating (SIGTERM) 20:30:58.606354 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12002): Terminating (SIGTERM) 20:30:58.616026 --- ParallelTerminationStrategy: PID 11996 died... 20:30:58.671600 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11996): Terminated: ok {rc=0} 20:30:58.681717 --- ParallelTerminationStrategy: PID 11999 died... 20:30:58.737260 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11999): Terminated: ok {rc=0} 20:30:58.747252 --- ParallelTerminationStrategy: PID 12002 died... 20:30:58.802695 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12002): Terminated: ok {rc=0} 20:30:58.889118 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12000): Process ended prematurely: osmo-stp_10.42.42.5(pid=12000) [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12000)]