Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 226 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=12039): Process ended prematurely: osmo-stp_10.42.42.5(pid=12039) [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12039)]

Standard Output

----------------------------------------------
trial-2364 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
20:31:22.305902 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:31:22.317988 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
20:31:22.463069 tst                        iperf3.py: using LAC 23537
20:31:22.585643 tst                        iperf3.py: using RAC 77
20:31:22.705804 tst                        iperf3.py: using CellId 23537
20:31:22.825956 tst                        iperf3.py: using BVCI 23538
20:31:22.849497 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:31:22.860660 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:31:22.871737 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:31:22.883044 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:31:22.894837 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:31:22.906392 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:31:22.917908 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:31:22.929217 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:31:22.940555 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
20:31:23.239397 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
20:31:23.377017 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:31:23.719324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12031): Launched
20:31:24.003022 run iperf3-srv_10.42.42.10(pid=12032): Launched
20:31:24.205516 tst                      iperf3.py:8: start network...
20:31:24.343153 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:31:24.868495 run         create_hlr_db(pid=12033): Launched
20:31:25.059095 bus                          /gobi_6: Setting Powered False
20:31:26.080299 run         create_hlr_db(pid=12033): Terminated: ok {rc=0}
20:31:26.492863 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12035): Launched
20:31:26.802932 run   osmo-hlr_10.42.42.2(pid=12036): Launched
20:31:26.924244 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:31:27.462091 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12038): Launched
20:31:27.771830 run   osmo-stp_10.42.42.5(pid=12039): Launched
20:31:27.884525 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:31:28.426566 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12041): Launched
20:31:28.544578 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:31:28.831811 run              patchelf(pid=12042): Launched
20:31:29.023377 run   osmo-stp_10.42.42.5(pid=12039): ERR: Terminated: ERROR {rc=1}  [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12039)]
20:31:29.163592 run   osmo-stp_10.42.42.5(pid=12039): stdout: 
| (launched: 2022-12-09_20:31:27.618631)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:31:29.303453 run   osmo-stp_10.42.42.5(pid=12039): stderr: 
| �[0;m�[38;5;43m20221209203127792 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209203127792 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209203127792 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209203127792 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209203127793 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209203127793 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209203127793 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:31:29.439171 run   osmo-stp_10.42.42.5(pid=12039): stdout: 
| (launched: 2022-12-09_20:31:27.618631)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:31:29.573865 run   osmo-stp_10.42.42.5(pid=12039): stderr: 
| �[0;m�[38;5;43m20221209203127792 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209203127792 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209203127792 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209203127792 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209203127793 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209203127793 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209203127793 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:31:29.730407 run              patchelf(pid=12042): Terminating (SIGINT)
20:31:29.914078 run              patchelf(pid=12042): Terminated: ok {rc=0}
20:31:29.947730 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=12039): Process ended prematurely: osmo-stp_10.42.42.5(pid=12039) [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12039)]  [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
20:31:29.957760 tst                      iperf3.py:8: Test FAILED (7.7 sec)
20:31:30.020308 run   osmo-hlr_10.42.42.2(pid=12036): ERR: Terminated: ERROR {rc=237}  [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12036)]
20:31:30.071436 run   osmo-hlr_10.42.42.2(pid=12036): stdout: 
| (launched: 2022-12-09_20:31:26.649311) 
20:31:30.123051 run   osmo-hlr_10.42.42.2(pid=12036): stderr: 
| �[0;m�[1;31m20221209203126828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209203126828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209203126828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209203126828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209203126828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209203126828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209203126841 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209203126849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209203126850 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209203126850 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:31:30.166890 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12031): Terminating (SIGTERM)
20:31:30.208188 run iperf3-srv_10.42.42.10(pid=12032): Terminating (SIGTERM)
20:31:30.249713 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12035): Terminating (SIGTERM)
20:31:30.291112 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12038): Terminating (SIGTERM)
20:31:30.332452 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12041): Terminating (SIGTERM)
20:31:30.342016 ---      ParallelTerminationStrategy: PID 12031 died...
20:31:30.397307 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12031): Terminated: ok {rc=0}
20:31:30.407231 ---      ParallelTerminationStrategy: PID 12032 died...
20:31:30.462146 run iperf3-srv_10.42.42.10(pid=12032): Terminated {rc=256}
20:31:30.472065 ---      ParallelTerminationStrategy: PID 12035 died...
20:31:30.527105 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12035): Terminated: ok {rc=0}
20:31:30.537081 ---      ParallelTerminationStrategy: PID 12038 died...
20:31:30.591922 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12038): Terminated: ok {rc=0}
20:31:30.601941 ---      ParallelTerminationStrategy: PID 12041 died...
20:31:30.656727 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12041): Terminated: ok {rc=0}
20:31:30.741908 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12039): Process ended prematurely: osmo-stp_10.42.42.5(pid=12039) [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12039)]