Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=12067): Process ended prematurely: osmo-stp_10.42.42.5(pid=12067) [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12067)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping.py ---------------------------------------------- 20:31:51.850038 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:31:51.862635 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 20:31:52.006071 tst ping.py: using LAC 23539 20:31:52.124036 tst ping.py: using RAC 79 20:31:52.243096 tst ping.py: using CellId 23539 20:31:52.365595 tst ping.py: using BVCI 23540 20:31:52.388446 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:31:52.399726 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:31:52.410921 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:31:52.422241 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:31:52.433430 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:31:52.444771 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:31:52.456175 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:31:52.467321 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 20:31:52.746702 tst ping.py:19: start network... 20:31:52.871597 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:31:53.345852 run create_hlr_db(pid=12061): Launched 20:31:53.519568 bus /gobi_6: Setting Powered False 20:31:54.540699 run create_hlr_db(pid=12061): Terminated: ok {rc=0} 20:31:54.944730 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12063): Launched 20:31:55.247460 run osmo-hlr_10.42.42.2(pid=12064): Launched 20:31:55.364634 run osmo-stp_10.42.42.5: Starting osmo-stp 20:31:55.901281 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12066): Launched 20:31:56.203405 run osmo-stp_10.42.42.5(pid=12067): Launched 20:31:56.313613 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:31:56.841046 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12069): Launched 20:31:56.947857 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:31:57.211247 run patchelf(pid=12070): Launched 20:31:57.386924 run osmo-stp_10.42.42.5(pid=12067): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12067)] 20:31:57.515826 run osmo-stp_10.42.42.5(pid=12067): stdout: | (launched: 2022-12-09_20:31:56.054325) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:31:57.644852 run osmo-stp_10.42.42.5(pid=12067): stderr: | �[0;m�[38;5;43m20221209203156224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209203156224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209203156224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209203156225 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209203156225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209203156226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209203156226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:31:57.769828 run osmo-stp_10.42.42.5(pid=12067): stdout: | (launched: 2022-12-09_20:31:56.054325) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:31:57.893480 run osmo-stp_10.42.42.5(pid=12067): stderr: | �[0;m�[38;5;43m20221209203156224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209203156224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209203156224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209203156225 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209203156225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209203156226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209203156226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:31:58.037530 run patchelf(pid=12070): Terminating (SIGINT) 20:31:58.206567 run patchelf(pid=12070): Terminated: ok {rc=0} 20:31:58.237635 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=12067): Process ended prematurely: osmo-stp_10.42.42.5(pid=12067) [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12067)] [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22] 20:31:58.246589 tst ping.py:22: Test FAILED (6.4 sec) 20:31:58.306825 run osmo-hlr_10.42.42.2(pid=12064): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12064)] 20:31:58.355908 run osmo-hlr_10.42.42.2(pid=12064): stdout: | (launched: 2022-12-09_20:31:55.097793) 20:31:58.405545 run osmo-hlr_10.42.42.2(pid=12064): stderr: | �[0;m�[1;31m20221209203155276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209203155276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209203155276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209203155276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209203155276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209203155276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209203155288 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209203155296 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209203155296 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209203155296 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:31:58.447134 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12063): Terminating (SIGTERM) 20:31:58.486542 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12066): Terminating (SIGTERM) 20:31:58.526204 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12069): Terminating (SIGTERM) 20:31:58.535533 --- ParallelTerminationStrategy: PID 12063 died... 20:31:58.588716 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12063): Terminated: ok {rc=0} 20:31:58.598296 --- ParallelTerminationStrategy: PID 12066 died... 20:31:58.651387 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12066): Terminated: ok {rc=0} 20:31:58.661230 --- ParallelTerminationStrategy: PID 12069 died... 20:31:58.714339 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12069): Terminated: ok {rc=0} 20:31:58.798587 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12067): Process ended prematurely: osmo-stp_10.42.42.5(pid=12067) [trial-2364↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12067)]