Failed
gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=11804): Process ended prematurely: osmo-stp_10.42.42.5(pid=11804) [trial-2364↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11804)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-b200 ping_idle_ping.py ---------------------------------------------- 20:28:00.105420 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:28:00.117303 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 20:28:00.264399 tst ping_idle_ping.py: using LAC 23520 20:28:00.393458 tst ping_idle_ping.py: using RAC 60 20:28:00.522872 tst ping_idle_ping.py: using CellId 23520 20:28:00.651566 tst ping_idle_ping.py: using BVCI 23521 20:28:00.676502 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:28:00.687707 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:28:00.698694 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:28:00.710004 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:28:00.721139 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:28:00.731977 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:28:00.743172 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:28:00.754325 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 20:28:01.075871 tst ping_idle_ping.py:24: start network... 20:28:01.214019 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:28:01.769890 run create_hlr_db(pid=11798): Launched 20:28:01.962577 bus /gobi_6: Setting Powered False 20:28:02.979328 run create_hlr_db(pid=11798): Terminated: ok {rc=0} 20:28:03.385449 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11800): Launched 20:28:03.687030 run osmo-hlr_10.42.42.2(pid=11801): Launched 20:28:03.806343 run osmo-stp_10.42.42.5: Starting osmo-stp 20:28:04.337513 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11803): Launched 20:28:04.638740 run osmo-stp_10.42.42.5(pid=11804): Launched 20:28:04.748080 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:28:05.271838 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11806): Launched 20:28:05.378882 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:28:05.641152 run patchelf(pid=11807): Launched 20:28:05.817176 run osmo-stp_10.42.42.5(pid=11804): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11804)] 20:28:05.946375 run osmo-stp_10.42.42.5(pid=11804): stdout: | (launched: 2022-12-09_20:28:04.490502) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:28:06.075925 run osmo-stp_10.42.42.5(pid=11804): stderr: | �[0;m�[38;5;43m20221209202804661 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202804661 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202804661 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202804662 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202804664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202804664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202804664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:28:06.200586 run osmo-stp_10.42.42.5(pid=11804): stdout: | (launched: 2022-12-09_20:28:04.490502) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:28:06.324528 run osmo-stp_10.42.42.5(pid=11804): stderr: | �[0;m�[38;5;43m20221209202804661 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202804661 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202804661 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202804662 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202804664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202804664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202804664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:28:06.468078 run patchelf(pid=11807): Terminating (SIGINT) 20:28:06.637244 run patchelf(pid=11807): Terminated: ok {rc=0} 20:28:06.668035 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=11804): Process ended prematurely: osmo-stp_10.42.42.5(pid=11804) [trial-2364↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11804)] [trial-2364↪gprs:trx-b200↪ping_idle_ping.py:27] 20:28:06.676838 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 20:28:06.737364 run osmo-hlr_10.42.42.2(pid=11801): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11801)] 20:28:06.786126 run osmo-hlr_10.42.42.2(pid=11801): stdout: | (launched: 2022-12-09_20:28:03.538772) 20:28:06.835753 run osmo-hlr_10.42.42.2(pid=11801): stderr: | �[0;m�[1;31m20221209202803715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209202803715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209202803715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209202803715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209202803715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209202803715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209202803727 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209202803736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209202803737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209202803737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:28:06.877445 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11800): Terminating (SIGTERM) 20:28:06.916842 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11803): Terminating (SIGTERM) 20:28:06.956305 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11806): Terminating (SIGTERM) 20:28:06.965760 --- ParallelTerminationStrategy: PID 11800 died... 20:28:07.018791 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11800): Terminated: ok {rc=0} 20:28:07.028482 --- ParallelTerminationStrategy: PID 11803 died... 20:28:07.081064 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11803): Terminated: ok {rc=0} 20:28:07.090877 --- ParallelTerminationStrategy: PID 11806 died... 20:28:07.143823 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11806): Terminated: ok {rc=0} 20:28:07.227107 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11804): Process ended prematurely: osmo-stp_10.42.42.5(pid=11804) [trial-2364↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11804)]