Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14330): Process ended prematurely: osmo-stp_10.42.42.5(pid=14330) [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14330)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 20:56:21.012047 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:21.023430 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:56:21.177951 tst iperf3.py: using LAC 23670 20:56:21.294508 tst iperf3.py: using RAC 210 20:56:21.413445 tst iperf3.py: using CellId 23670 20:56:21.532427 tst iperf3.py: using BVCI 23671 20:56:21.555149 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:21.565929 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:21.576368 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:21.586856 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:21.597772 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:21.608559 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:21.619393 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:21.630274 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:21.641379 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:56:21.930194 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 20:56:22.063481 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:56:22.391758 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14322): Launched 20:56:22.665727 run iperf3-srv_10.42.42.10(pid=14323): Launched 20:56:22.861631 tst iperf3.py:8: start network... 20:56:22.994821 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:56:23.504868 run create_hlr_db(pid=14324): Launched 20:56:23.688707 bus /gobi_6: Setting Powered False 20:56:24.710649 run create_hlr_db(pid=14324): Terminated: ok {rc=0} 20:56:25.135455 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14326): Launched 20:56:25.453850 run osmo-hlr_10.42.42.2(pid=14327): Launched 20:56:25.574056 run osmo-stp_10.42.42.5: Starting osmo-stp 20:56:26.132219 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14329): Launched 20:56:26.450202 run osmo-stp_10.42.42.5(pid=14330): Launched 20:56:26.566483 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:56:27.122245 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14332): Launched 20:56:27.236241 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:56:27.513738 run patchelf(pid=14333): Launched 20:56:27.699435 run osmo-stp_10.42.42.5(pid=14330): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14330)] 20:56:27.836231 run osmo-stp_10.42.42.5(pid=14330): stdout: | (launched: 2022-12-09_20:56:26.294296) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:56:27.972189 run osmo-stp_10.42.42.5(pid=14330): stderr: | �[0;m�[38;5;43m20221209205626481 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209205626481 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209205626481 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209205626481 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209205626482 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209205626482 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209205626482 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:56:28.104006 run osmo-stp_10.42.42.5(pid=14330): stdout: | (launched: 2022-12-09_20:56:26.294296) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:56:28.234846 run osmo-stp_10.42.42.5(pid=14330): stderr: | �[0;m�[38;5;43m20221209205626481 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209205626481 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209205626481 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209205626481 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209205626482 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209205626482 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209205626482 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:56:28.386635 run patchelf(pid=14333): Terminating (SIGINT) 20:56:28.565019 run patchelf(pid=14333): Terminated: ok {rc=0} 20:56:28.598078 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14330): Process ended prematurely: osmo-stp_10.42.42.5(pid=14330) [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14330)] [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 20:56:28.608134 tst iperf3.py:8: Test FAILED (7.6 sec) 20:56:28.671123 run osmo-hlr_10.42.42.2(pid=14327): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14327)] 20:56:28.722068 run osmo-hlr_10.42.42.2(pid=14327): stdout: | (launched: 2022-12-09_20:56:25.298037) 20:56:28.773764 run osmo-hlr_10.42.42.2(pid=14327): stderr: | �[0;m�[1;31m20221209205625493 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209205625493 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209205625493 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209205625493 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209205625493 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209205625493 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209205625505 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209205625514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209205625514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209205625514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:56:28.817622 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14322): Terminating (SIGTERM) 20:56:28.859112 run iperf3-srv_10.42.42.10(pid=14323): Terminating (SIGTERM) 20:56:28.900633 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14326): Terminating (SIGTERM) 20:56:28.942144 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14329): Terminating (SIGTERM) 20:56:28.983802 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14332): Terminating (SIGTERM) 20:56:28.993830 --- ParallelTerminationStrategy: PID 14322 died... 20:56:29.049706 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14322): Terminated: ok {rc=0} 20:56:29.059980 --- ParallelTerminationStrategy: PID 14323 died... 20:56:29.115616 run iperf3-srv_10.42.42.10(pid=14323): Terminated {rc=256} 20:56:29.125868 --- ParallelTerminationStrategy: PID 14326 died... 20:56:29.181424 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14326): Terminated: ok {rc=0} 20:56:29.191624 --- ParallelTerminationStrategy: PID 14329 died... 20:56:29.246993 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14329): Terminated: ok {rc=0} 20:56:29.257483 --- ParallelTerminationStrategy: PID 14332 died... 20:56:29.312940 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14332): Terminated: ok {rc=0} 20:56:29.399812 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14330): Process ended prematurely: osmo-stp_10.42.42.5(pid=14330) [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14330)]