Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=14879): Process ended prematurely: osmo-stp_10.42.42.5(pid=14879) [trial-2364↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14879)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 21:03:42.397736 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:42.410130 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 21:03:42.568674 tst ping.py: using LAC 23709 21:03:42.688933 tst ping.py: using RAC 249 21:03:42.808175 tst ping.py: using CellId 23709 21:03:42.926984 tst ping.py: using BVCI 23710 21:03:42.949749 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:42.960744 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:42.971759 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:42.983282 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:42.994919 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:43.006589 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:43.018544 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:43.030332 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:03:43.306658 tst ping.py:19: start network... 21:03:43.430892 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:03:43.898532 run create_hlr_db(pid=14873): Launched 21:03:44.069313 bus /gobi_6: Setting Powered False 21:03:45.090735 run create_hlr_db(pid=14873): Terminated: ok {rc=0} 21:03:45.512271 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14875): Launched 21:03:45.835358 run osmo-hlr_10.42.42.2(pid=14876): Launched 21:03:46.057498 run osmo-stp_10.42.42.5: Starting osmo-stp 21:03:46.722492 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14878): Launched 21:03:47.047232 run osmo-stp_10.42.42.5(pid=14879): Launched 21:03:47.260904 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:03:47.818476 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14881): Launched 21:03:47.924061 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:03:48.183354 run patchelf(pid=14882): Launched 21:03:48.356349 run osmo-stp_10.42.42.5(pid=14879): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14879)] 21:03:48.483456 run osmo-stp_10.42.42.5(pid=14879): stdout: | (launched: 2022-12-09_21:03:46.876446) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:03:48.611022 run osmo-stp_10.42.42.5(pid=14879): stderr: | �[0;m�[38;5;43m20221209210347154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209210347154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209210347154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209210347155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209210347155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209210347155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209210347155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:03:48.734017 run osmo-stp_10.42.42.5(pid=14879): stdout: | (launched: 2022-12-09_21:03:46.876446) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:03:48.855678 run osmo-stp_10.42.42.5(pid=14879): stderr: | �[0;m�[38;5;43m20221209210347154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209210347154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209210347154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209210347155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209210347155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209210347155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209210347155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:03:48.997992 run patchelf(pid=14882): Terminating (SIGINT) 21:03:49.165082 run patchelf(pid=14882): Terminated: ok {rc=0} 21:03:49.195407 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=14879): Process ended prematurely: osmo-stp_10.42.42.5(pid=14879) [trial-2364↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14879)] [trial-2364↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22] 21:03:49.204173 tst ping.py:22: Test FAILED (6.8 sec) 21:03:49.264097 run osmo-hlr_10.42.42.2(pid=14876): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14876)] 21:03:49.312845 run osmo-hlr_10.42.42.2(pid=14876): stdout: | (launched: 2022-12-09_21:03:45.673745) 21:03:49.362346 run osmo-hlr_10.42.42.2(pid=14876): stderr: | �[0;m�[1;31m20221209210345919 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209210345919 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209210345920 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209210345920 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209210345920 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209210345920 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209210345940 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209210345957 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209210345957 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209210345957 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:03:49.403896 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14875): Terminating (SIGTERM) 21:03:49.443567 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14878): Terminating (SIGTERM) 21:03:49.482777 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14881): Terminating (SIGTERM) 21:03:49.492071 --- ParallelTerminationStrategy: PID 14875 died... 21:03:49.545168 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14875): Terminated: ok {rc=0} 21:03:49.554702 --- ParallelTerminationStrategy: PID 14878 died... 21:03:49.607089 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14878): Terminated: ok {rc=0} 21:03:49.616725 --- ParallelTerminationStrategy: PID 14881 died... 21:03:49.669671 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14881): Terminated: ok {rc=0} 21:03:49.751843 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14879): Process ended prematurely: osmo-stp_10.42.42.5(pid=14879) [trial-2364↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14879)]